Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

LexusLexus GS

2005–2011 · 11 defeitos documentados · 3 mercados
Ano do modelo
RecallCríticoInteriorNA

Air bags

On certain vehicles, due to improper assembly of the air bag inflator, which is used in the side air bag, the curtain shield air bag, and the knee air bag assembly, some inflators were produced with an insufficient amount of the heating agents necessary for proper air bag deployment. In this condition, the expansion force of the gas may be insufficient to properly inflate the air bag when the srs system is activated during a crash.

NHTSA · Estados Unidos3 de abr. de 200606V096000Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoInteriorNA

Airbag

This vehicle may contain inadequate side airbag inflators. The airbag inflators were produced with an insufficient amount of the heating agents which apply heat to the argon gas in the inflator. In this condition, expansion force of the gas in the inflator may be insufficient to properly inflate the airbag when the system is activated during a collision, which can increase the risk of injury. Correction: Dealer will replace the side airbag module.

Transport Canada29 de mar. de 20062006068Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoInteriorJP

エアバッグ

サイドエアバッグ、カーテンシールドエアバッグ、ニーエアバッグそれぞれのインフレータ(膨張装置)の組付工程が不適切なため、ガス加熱剤の充填量が不足しているものがある。そのため、エアバッグが作動するような衝撃を受けた際、ガスの膨張力が不足し当該エアバッグが展開せず、乗員に過度の傷害を与えるおそれがある。

MLIT · Japão28 de mar. de 20061116420Anos-modelo 2005Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoInteriorNA

Seats And Restraints

On certain GS 300, GS 300 AWD, GS 430, IS 250, IS 250 AWD and IS 350 vehicles, the front seat belt retractors may contain an inappropriately sized part for the emergency locking system. This can prevent the locking system from releasing when it is activated. If the seat belt is locked in this condition, the occupant may either not fasten the seat belt, or be inadequately restrained due to improper belt-fit thereby increasing the risk of injury. Correction: Dealers will replace the front seat belt assemblies.

Transport Canada13 de abr. de 20062006078Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoInteriorNA

Seat belts:Front

On certain passenger vehicles, if the front seat belt retractors (both driver and front passenger) become locked, they may not release due to a component of the emergency locking system. If the seat belt is locked in this condition, the occupant may not be able to properly fasten the seat belt.

NHTSA · Estados Unidos13 de abr. de 200606V121000Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoInteriorJP

シートベルト

運転者席及び助手席用座席ベルトの巻取装置内部の部品に製造不良のものがあるため、ロック機構のギアセンサ端部とガイドホルダが干渉し、座席ベルトを引き出せないことがある。そのため、当該ベルトが装着できず、乗員を拘束できなくなるおそれがある。

MLIT · Japão12 de abr. de 20061116550Anos-modelo 2005Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoInteriorKR

기타장치

렉서스LS430 03.8.27~05.8.23 (2대) 렉서스GS300 05.11.25 (1대) 렉서스GS430 05.8.22 (1대) SRS에어백 팽창물질이 충분히 삽입되지 않아 총돌시 에어백이 완전히 팽창되지 않을 수 있음

MOLIT · Coreia do Sul11 de abr. de 2006611Anos-modelo 2005–2006Exibido no coreano original · tradução pendenteVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).