Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

LexusLexus GS

1997–2020 · 6 gerações · 15 defeitos documentados · 5 mercados
Gerações

Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.

GravidadeTodasLeve
Ano do modelo
GS (L10) · 2012–2020
BoletimLeveMotorNA

Boletim

TT: Injector Maintenance Required message shows at approximately 6000 miles.

NHTSA · boletim do fabricante10134402Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
GS (L10) · 2012–2020
BoletimLeveMotorNA

Boletim

TT: Injector Maintenance Required message shows at approximately 6000 miles.

NHTSA · boletim do fabricante10134344Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
GS (L10) · 2012–2020
BoletimLeveMotorNA

Boletim

Tt: Injector maintenance required message shows at approximately 6000 miles.

NHTSA · boletim do fabricante10086290Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
GS (L10) · 2012–2020
BoletimLeveMotorNA

Boletim

DL: On December 20, 2022, a settlement of claims for certain low pressure fuel pumps was approved by the federal court. The settlement includes Lexus?s agreement to provide a Customer Support Program for certain 2013-2020 model year (MY) vehicles originally equipped with low pressure fuel pumps repaired under Safety Recall 20LA01 or Special Service Campaign 21LC01. The purpose of this Customer Support Program letter is to help clarify how to administer this coverage in accordance with the settlement.

NHTSA · boletim do fabricante10235219Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
GS II · 2004
BoletimLeveMotorNA

Boletim

This is to advise of various price adjustments affecting Genuine Lexus Motor Oil and Long-Life Coolant, effective March 1, 2023. These products are ordered through the Lexus Complete Maintenance Care (LCMC) website.

NHTSA · boletim do fabricante10234301Exibido no inglês original · tradução pendenteVer detalhes →
GS · 2005–2011
BoletimLeveMotorNA

Boletim

Fuel Delivery Pipe Replacement

NHTSA · boletim do fabricante10205357Anos-modelo 2008Exibido no inglês original · tradução pendenteVer detalhes →
GS (L10) · 2012–2020
BoletimLeveMotorNA

Boletim

Adhesive & Sealant Cross Reference Information/ Engine Hybrid System

NHTSA · boletim do fabricante10205360Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
GS (L10) · 2012–2020
BoletimLeveMotorNA

Boletim

Adhesive & Sealant Cross Reference Information/ Engine Hybrid System

NHTSA · boletim do fabricante10205361Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
GS · 2005–2011
BoletimLeveMotorNA

Boletim

Engine Misfire Duplication Procedure - MIL on DTC p030 and /or Intermittently Runs Rough

NHTSA · boletim do fabricante10205364Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
GS · 2005–2011
BoletimLeveMotorNA

Boletim

Engine Misfire Duplication Procedure - MIL on DTC p030 and /or Intermittently Runs Rough

NHTSA · boletim do fabricante10205387Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
GS (L10) · 2012–2020
BoletimLeveMotorNA

Boletim

Fuel Injection Active Test Remedy - 2GR-FKS and 8AR-fts

NHTSA · boletim do fabricante10205388Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
GS IV · 2020
BoletimLeveMotorNA

Boletim

TT: The current engine active test Control the Injection Mode? is not operating as desired when controlling the direct injectors manually on 2GR-FKS engines. When direct injection is started and then stopped using the active test, current ECU logic does not turn off the direct injectors and can cause DTCs P017200, P017500 and P0160300. To avoid this condition, technicians should raise engine RPM when changing back and forth between the Direct Injection and Port Injection active tests. Use the recommended procedure below to avoid this concern while testing injection mode of FKS equipped vehicles. NOTE: If the active test is used multiple times without using this procedure to raise engine RPM, it may be necessary to reset learning values for fuel trim and Air to Fuel ratio before returning vehicle to customer.

NHTSA · boletim do fabricante10153281Anos-modelo 2020Exibido no inglês original · tradução pendenteVer detalhes →
GS · 2005–2011
BoletimLeveMotorNA

Boletim

TT: Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: ? MIL ?ON? DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306. ? Intermittently runs rough after coming to a stop with the engine at operating temperature. ? Intermittently runs rough with engine misfires present after a cold soak startup. NOTE: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis.

NHTSA · boletim do fabricante10152274Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
GS (L10) · 2012–2020
BoletimLeveMotorNA

Boletim

TT: TMS has discovered the current engine active test ?Control the Injection Mode? is not operating as desired when controlling the direct injectors manually on 2GR-FKS or 8AR-FTS engines. When direct injection is started and then stopped using the active test, current ECU logic does not turn off the direct injectors and can cause DTCs P017200, P017500 and P0160300. In order to avoid this condition, technicians should raise engine RPM when changing from Direct Injection active test to Port Injection active test. Use the recommended procedure below to avoid this concern while testing injection mode of 2GR-FKS or 8AR-FTS equipped vehicles. NOTE: If the active test is used multiple times without using this procedure to raise engine RPM, it may be necessary to reset learning values for fuel trim and Air to Fuel ratio before returning vehicle to customer.

NHTSA · boletim do fabricante10152276Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
GS (L10) · 2012–2020
BoletimLeveMotorNA

Boletim

TSB: Alguns veículos FR-S do ano-modelo 2013 ao 2016 podem apresentar um ruído agudo de chiado ou rangido vindo do conjunto da bomba de combustível de alta pressão quando o motor está totalmente aquecido e em marcha lenta. Siga o procedimento deste boletim para resolver esta condição.

NHTSA · boletim do fabricante10132906Anos-modelo 2016Traduzido automaticamente · original: inglêsVer detalhes →
GS · 2005–2011
BoletimLeveMotorNA

Boletim

Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL "ON" DTC P0300, P0301, P0302, P0303, P0304, P0305, and or P0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. intermittently runs rough with engine misfires present after a cold soak startup.

NHTSA · boletim do fabricante10132274Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
GS · 2005–2011
BoletimLeveMotorNA

Boletim

Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL ?ON? DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306 Intermittently runs rough after coming to a stop with the engine at operating temperature Intermittently runs rough with engine misfires present after a cold soak startup

NHTSA · boletim do fabricante10132188Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
GS · 2005–2011
BoletimLeveMotorNA

Boletim

Tech Tip: Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL "ON" DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. Intermittently runs rough with engine misfires present after a cold soak startup. NOTE: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis.

NHTSA · boletim do fabricante10109510Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
GS (L10) · 2012–2020
BoletimLeveMotorNA

Boletim

"tt: Tms has discovered the current engine active test control the injection mode is not operating as desired when controlling the direct injectors manually on 2gr-fks or 8ar-fts engines. When direct injection is started and then stopped using the active test, current ecu logic does not turn off the direct injectors and can cause dtcs p017200, p017500 and p0160300. In order to avoid this condition, technicians should raise engine rpm when changing from direct injection active test to port injection active test. Use the recommended procedure below to avoid this concern while testing injection mode of 2gr-fks or 8ar-fts equipped vehicles. Note: If the active test is used multiple times without using this procedure to raise engine rpm, it may be necessary to reset learning values for fuel trim and air to fuel ratio before returning vehicle to customer."

NHTSA · boletim do fabricante10093695Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
GS · 2005–2011
BoletimLeveMotorNA

Boletim

"tt: Some is250 and gs300 vehicles may exhibit one or more of the following conditions: Mil on dtc p0300, p0301, p0302, p0303, p0304, p0305, and/or p0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. Intermittently runs rough with engine misfires present after a cold soak startup. Note: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis."

NHTSA · boletim do fabricante10093692Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
GS · 2005–2011
BoletimLeveMotorNA

Boletim

Lexus: Is250-gs300: Engine runs rough when coming to a stop, after cold soak start up engine misfires. *lj

NHTSA · boletim do fabricante10057004Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
GS · 2005–2011
BoletimLeveMotorNA

Boletim

Lexus: Vehicle engine runs rough after coming to a stop or misfires. *pe

NHTSA · boletim do fabricante10041636Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
GS · 2005–2011
BoletimLeveMotorNA

Boletim

Lexus: Mil on dtc p030# and/or intermittently runs rough. Engine/hybrid. Engine control. Some vehicles may exhibit one or more of the following conditions. Mil on dtc p0300, p0301, p0302, p0303, p0304, p0305 and/or p0306. Runs rough after stopping with engine at operating temperature; runs rough with engine misfires after cold soak startup. *pe

NHTSA · boletim do fabricante10033734Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
GS · 2005–2011
BoletimLeveMotorNA

Boletim

Ilsac gf-4 engine oil standard. '06 lexus. *tt excluding hybrid vehicles. *tt recommendation. *tt

NHTSA · boletim do fabricante10019327Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
GS · 2005–2011
BoletimLeveMotorNA

Boletim

Repair manual correction for the engine (3uz-fe). 00245-rm112-6u1. *tt

NHTSA · boletim do fabricante10015653Anos-modelo 2005Exibido no inglês original · tradução pendenteVer detalhes →
Mais antigos →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).