Em razão do projeto inadequado da flange que fixa o tubo de escape ao tanque de combustível, pode se desenvolver uma trinca por tensão na superfície externa da flange, que se expande com o tempo, aumentando o risco de incêndio.
Safety Gate · UE · RappelConso · França23 de abr. de 2024a12/01862/22Anos-modelo 2011–2018Traduzido automaticamente · original: francêsVer detalhes →
O conjunto do tubo de ventilação do tanque de combustível pode desenvolver uma rachadura, o que pode levar a um vazamento de combustível e ao risco de incêndio no veículo.�
DVSA · Reino Unido23 de jan. de 2023R/2022/345Anos-modelo 2012–2018Traduzido automaticamente · original: inglêsVer detalhes →
No sistema de controle de emissões evaporativas de combustível instalado no tanque de combustível, a forma da parte superior da carcaça (de resina) é inadequada, por isso podem surgir pequenas trincas nessa carcaça durante o uso. Assim, se o veículo for utilizado por um longo período, a trinca pode atravessar a parede, e o combustível pode vazar quando o tanque estiver cheio, havendo risco de odor de combustível.
MLIT · Japão30 de nov. de 20221152460Anos-modelo 2011–2018Traduzido automaticamente · original: japonêsVer detalhes →
A crack in the fuel pulsation damper may lead to a fuel leak. Fuel leakage close to a source of ignition may increase the risk of the vehicle catching fire.
Safety Gate · UE26 de out. de 2018A12/1622/18Anos-modelo 2005–2012Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles equipped with a 3.5L V6 engine, the fuel pulsation dampers located in the fuel delivery pipe could develop a leak over time. A fuel leak in the presence of an ignition source could increase the risk of fire causing injury and/or damage to property. Correction: Dealers will replace the fuel delivery pipe with an updated part.
Transport Canada26 de jun. de 20182018346Anos-modelo 2007–2011Exibido no inglês original · tradução pendenteVer detalhes →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2007-2011 Lexus GS350 and GS450h, 2006-2013 Lexus IS350 and 2010-2014 Lexus IS350C vehicles, equipped with 3.5L V6 2GR-FSE gasoline engines. The diaphragms in the fuel pulsation dampers may harden over time and develop cracks, possibly causing a fuel leak.
NHTSA · Estados Unidos26 de jun. de 201818V432000Anos-modelo 2007–2011Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the fuel delivery pipes in the engine compartment may have been produced with particles from the anti-corrosion plating on the gasket seating surface where the fuel pressure sensor is installed. This could affect the sealing properties of the gasket seated between the pressure sensor and the pipe, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will replace the gasket and repair the gasket seating surface.
Transport Canada16 de out. de 20142014458Anos-modelo 2006–2010Exibido no inglês original · tradução pendenteVer detalhes →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2007-2010 Lexus LS vehicles manufactured May 9, 2006, to July 20, 2010, 2006-2011 Lexus GS vehicles manufactured January 6, 2005, to September 10, 2010, and 2006-2011 Lexus IS vehicles manufactured August 30, 2005, to September 10, 2010. Due to anti-corrosion plating remnants, fuel may leak from where the fuel pressure sensor is attached to the fuel delivery pipe.
NHTSA · Estados Unidos15 de out. de 201414V647000Anos-modelo 2006–2011Exibido no inglês original · tradução pendenteVer detalhes →
Het materiaal van de ommanteling van de brandstofpompbedrading in de brandstoftank is niet voldoende flexibel. Hierdoor beweegt de elektrische aansluiting op de brandstofpomp teveel.
rdw18 de dez. de 2013MGP100246Anos-modelo 2005Exibido no holandês original · tradução pendenteVer detalhes →
Toyota is recalling certain model year 2006-2009 lexus is and model year 2006-2007 lexus gs vehicles. Due to insufficient tightening of the fuel pressure sensor connected to an engine fuel delivery pipe with nickel phosphorus plating, there is a possibility that, over time, the pressure sensor could loosen. If loosening occurs, fuel could leak past a gasket used in the connection between the sensor and the pipe and through the threaded portion of the sensor.
NHTSA · Estados Unidos26 de jan. de 201111V029000Anos-modelo 2006–2007Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the material composition of the engine valve springs may include micro-foreign objects, which may compromise the strength of the valve spring, causing the spring to degrade and break. If a valve springs breaks, abnormal noise and rough engine performance will be noticed and, in the worst case, the engine could fail and stop suddenly while the vehicle is in motion. A sudden engine failure would result in lost propulsion which, in conjunction with traffic, road conditions, and driver's reactions, could increase the risk of a crash causing property damage, personal injury or death. Correction: Dealers will install new valve springs.
Transport Canada5 de jul. de 20102010221Anos-modelo 2007–2008Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the use of selected ethanol fuels may cause the aluminium fuel rails to corrode. This could result in plugged fuel injector(s), causing a rough engine idle and/or the illumination of the engine warning lamp. Corrosion may also cause a pinhole to develop on the fuel rail, which could result in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire. Correction: Dealers will replace the fuel rails.
Transport Canada19 de jan. de 20092009015Anos-modelo 2006–2007Exibido no inglês original · tradução pendenteVer detalhes →
Toyota is recalling 214,570 my 2006-2008 lexus is, my 2006-2007 gs and my 2007-2008 ls passenger vehicles equipped with aluminum fuel delivery pipes (fuel rails). Ethanol fuels with a low moisture content will corrode the internal surface of the fuel rails. As this condition progresses, the engine malfunction indicator light may illuminate.
NHTSA · Estados Unidos16 de jan. de 200909V020000Anos-modelo 2006–2007Exibido no inglês original · tradução pendenteVer detalhes →
On certain GS 300, GS 300 AWD, IS 250, IS 250 AWD and IS 350 vehicles, incorrect fabrication process may cause the fuel lines to crack, possibly resulting in a leak. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire causing injury or death. Correction: Dealers will replace the fuel lines.
Transport Canada28 de nov. de 20072007377Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, high stress areas may have been created in two specific fuel pipes located in the engine compartment. Combined with other factors such as the presence of corrosive agents in fuel, a crack may form over time leading to fuel leakage from the fuel line(s).
NHTSA · Estados Unidos28 de nov. de 200707V545000Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Toyota Motor Engineering & Manufacturing (Toyota) está convocando para recall determinados veículos Lexus RC dos anos 2015 a 2022, GS dos anos 2016 a 2020 e IS do ano 2022. A bomba de combustível de baixa pressão, instalada dentro do tanque de combustível, pode apresentar falha.
NHTSA · Estados Unidos8 de abr. de 202626V222000Anos-modelo 2016–2020Traduzido automaticamente · original: inglêsVer detalhes →
Em bombas de combustível de baixa pressão, o impulsor (rotor de resina) pode, devido a condições de moldagem inadequadas, apresentar baixa densidade da resina, inchando e se deformando ao entrar em contato com o combustível. Com isso, o impulsor pode atritar com a carcaça da bomba, causando mau funcionamento da bomba de combustível e, no pior dos casos, risco de o motor morrer durante a condução.
MLIT · Japão2 de nov. de 20231154040Anos-modelo 2017–2020Traduzido automaticamente · original: japonêsVer detalhes →
Devido a um defeito de fabricação, pode ocorrer fissuração superficial no impulsor da bomba de combustível de baixa pressão. Consequentemente, o impulsor pode deformar-se, fazendo com que a bomba de combustível deixe de funcionar e o motor pare, aumentando o risco de acidente.
Safety Gate · UE16 de nov. de 2022A12/00414/20Anos-modelo 2019Traduzido automaticamente · original: inglêsVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).