Em razão do projeto inadequado da flange que fixa o tubo de escape ao tanque de combustível, pode se desenvolver uma trinca por tensão na superfície externa da flange, que se expande com o tempo, aumentando o risco de incêndio.
Safety Gate · UE · RappelConso · França23 de abr. de 2024a12/01862/22Anos-modelo 2011–2018Traduzido automaticamente · original: francêsVer detalhes →
Due to the improper design of the flange attaching the vent tube to the fuel tank, a stress-related crack could develop on the outer surface of the flange and expand over time. increasing the risk of fire.
Safety Gate · UE11 de abr. de 2023A12/01862/22Anos-modelo 2011–2018Exibido no inglês original · tradução pendenteVer detalhes →
A crack in the fuel pulsation damper may lead to a fuel leak. Fuel leakage close to a source of ignition may increase the risk of the vehicle catching fire.
Safety Gate · UE26 de out. de 2018A12/1622/18Anos-modelo 2005–2014Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles equipped with a 3.5L V6 engine, the fuel pulsation dampers located in the fuel delivery pipe could develop a leak over time. A fuel leak in the presence of an ignition source could increase the risk of fire causing injury and/or damage to property. Correction: Dealers will replace the fuel delivery pipe with an updated part.
Transport Canada26 de jun. de 20182018346Anos-modelo 2006–2014Exibido no inglês original · tradução pendenteVer detalhes →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2007-2011 Lexus GS350 and GS450h, 2006-2013 Lexus IS350 and 2010-2014 Lexus IS350C vehicles, equipped with 3.5L V6 2GR-FSE gasoline engines. The diaphragms in the fuel pulsation dampers may harden over time and develop cracks, possibly causing a fuel leak.
NHTSA · Estados Unidos26 de jun. de 201818V432000Anos-modelo 2006–2014Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the fuel delivery pipes in the engine compartment may have been produced with particles from the anti-corrosion plating on the gasket seating surface where the fuel pressure sensor is installed. This could affect the sealing properties of the gasket seated between the pressure sensor and the pipe, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will replace the gasket and repair the gasket seating surface.
Transport Canada16 de out. de 20142014458Anos-modelo 2006–2011Exibido no inglês original · tradução pendenteVer detalhes →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2007-2010 Lexus LS vehicles manufactured May 9, 2006, to July 20, 2010, 2006-2011 Lexus GS vehicles manufactured January 6, 2005, to September 10, 2010, and 2006-2011 Lexus IS vehicles manufactured August 30, 2005, to September 10, 2010. Due to anti-corrosion plating remnants, fuel may leak from where the fuel pressure sensor is attached to the fuel delivery pipe.
NHTSA · Estados Unidos15 de out. de 201414V647000Anos-modelo 2006–2011Exibido no inglês original · tradução pendenteVer detalhes →
Het aanhaalmoment van de brandstofdruksensor op de brandstofaanvoerleiding is bij de montage in de fabriek niet optimaal geweest. Als gevolg hiervan kan de brandstofdruksensor na verloop van tijd losser komen te zitten dan vereist.
rdw18 de dez. de 2013MGP110024Anos-modelo 2008Exibido no holandês original · tradução pendenteVer detalhes →
Toyota is recalling certain model year 2006-2009 lexus is and model year 2006-2007 lexus gs vehicles. Due to insufficient tightening of the fuel pressure sensor connected to an engine fuel delivery pipe with nickel phosphorus plating, there is a possibility that, over time, the pressure sensor could loosen. If loosening occurs, fuel could leak past a gasket used in the connection between the sensor and the pipe and through the threaded portion of the sensor.
NHTSA · Estados Unidos26 de jan. de 201111V029000Anos-modelo 2006–2009Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the material composition of the engine valve springs may include micro-foreign objects, which may compromise the strength of the valve spring, causing the spring to degrade and break. If a valve springs breaks, abnormal noise and rough engine performance will be noticed and, in the worst case, the engine could fail and stop suddenly while the vehicle is in motion. A sudden engine failure would result in lost propulsion which, in conjunction with traffic, road conditions, and driver's reactions, could increase the risk of a crash causing property damage, personal injury or death. Correction: Dealers will install new valve springs.
Transport Canada5 de jul. de 20102010221Anos-modelo 2006–2008Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the use of selected ethanol fuels may cause the aluminium fuel rails to corrode. This could result in plugged fuel injector(s), causing a rough engine idle and/or the illumination of the engine warning lamp. Corrosion may also cause a pinhole to develop on the fuel rail, which could result in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire. Correction: Dealers will replace the fuel rails.
Transport Canada19 de jan. de 20092009015Anos-modelo 2006–2008Exibido no inglês original · tradução pendenteVer detalhes →
Toyota is recalling 214,570 my 2006-2008 lexus is, my 2006-2007 gs and my 2007-2008 ls passenger vehicles equipped with aluminum fuel delivery pipes (fuel rails). Ethanol fuels with a low moisture content will corrode the internal surface of the fuel rails. As this condition progresses, the engine malfunction indicator light may illuminate.
NHTSA · Estados Unidos16 de jan. de 200909V020000Anos-modelo 2006–2008Exibido no inglês original · tradução pendenteVer detalhes →
On certain GS 300, GS 300 AWD, IS 250, IS 250 AWD and IS 350 vehicles, incorrect fabrication process may cause the fuel lines to crack, possibly resulting in a leak. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire causing injury or death. Correction: Dealers will replace the fuel lines.
Transport Canada28 de nov. de 20072007377Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, high stress areas may have been created in two specific fuel pipes located in the engine compartment. Combined with other factors such as the presence of corrosive agents in fuel, a crack may form over time leading to fuel leakage from the fuel line(s).
NHTSA · Estados Unidos28 de nov. de 200707V545000Anos-modelo 2006Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).