Boletim
Tire pressure monitoring system (TPMS) warning Light IlluminationMisure prevention logic
🔔 Crie uma conta gratuita para receber alertas por e-mail sobre Mazda Demio (todas as gerações)
Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.
Tire pressure monitoring system (TPMS) warning Light IlluminationMisure prevention logic
Some customers may experience a SBS/SCBS, LAS/LDWS and/or HBC warning light on. A system error message may also be found in the center display. DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction). DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction) is stored in the FSC module and cannot be erased. This concern may be caused by a hardware failure of an internal device of the FSC, which results in a malfunction detection. To eliminate this concern, the production process of the FSC has been modified.
Alguns veículos podem apresentar um ruído de chiado nos freios dianteiros ao frear após ficarem parados em clima frio e úmido. Devido ao aumento da resistência das pastilhas em condições de frio, as pastilhas vibram facilmente, provocando o ruído de chiado.
A/C blows warm air. Some customers may complain about warm air from the climate cointrol vents. This may be caused by improper brazing (A) of the evaporator (B) causing a refrigerant leak fr om the joint between the tubes and the header (D)
If you experience issues with the current version of ID's such as missing tools or modules not showing after completing a network test, be advised that we are aware of these issues and are working to resolve them. As a counter measure, it is advised that you un-install ids and re-install version 103.00 and "do not update" until further notice.
Some vehicles may exhibit an unusual noise from around the drivers foot area when repeatedly turning the steering wheel to the left or right. A vibration is felt at the steering wheel when the noise occurs. This concern may be caused by a lack of grease application to the splines of the intermediate shaft at the production line. The grease application process has been improved.
Alguns clientes podem reclamar de qualquer um dos seguintes itens: 1. A tela da central multimídia não fornece o Código de Autorização (OTP) durante o registro do veículo conectado no aplicativo MyMazda. 2. Função(ões) remota(s) inoperante(s).
Alguns veículos podem apresentar a luz de verificação do motor (Check Engine) acesa, com o código DTC P0300:00 (Falha de ignição aleatória detectada) armazenado. Isso pode ser causado por uma detecção incorreta de falha de ignição devido a uma lógica de controle do PCM inadequada. Para eliminar esse problema, a lógica de controle do PCM foi modificada.
Alguns clientes podem notar que a luz de carga acende durante a condução. Ao realizar a inspeção, o DTC P2502:00 PCM (Falha na tensão gerada pelo alternador) fica armazenado na memória. Isso pode ser causado por resistência entre a placa de circuito e o terra. Quando passa corrente elétrica de alta intensidade, a posição do terminal de terra pode não ser suficiente. Para eliminar essa preocupação, o software de controle do conversor CC-CC foi modificado. Além disso, o procedimento de produção foi revisado. O torque de aperto do terminal de terra e da placa de circuito foi aumentado.
Some customers may experience a check engine light illumination at idle while stopped with DTC P0300:00 stored, resulting in rough idle conditions. P0300:00: Random misfire detected This concern is caused by improper engine control in the idle range. To eliminate the concern, the PCM control software has been modified.
Front/Rear stabilizer noise prevention
## MultiModel (equipado com skyactivdrive) deterioração da cor do ATF O fluido de transmissão automática (ATF) de um veículo novo é azul. À medida que a quilometragem do veículo aumenta, a cor do ATF muda. A mudança de cor não afeta o desempenho do veículo.
BSM Radar aiming cannot be performed after rightside BSM control module rekkplacement
Mazda Technical Service Bulletins March 2016 Some vehicles may exhibit the inner cloth (A) falling down at the rear end causing a poor appearance and obstructing the view of the back window.
Maintenance.
MAZDA CONNECTED SERVICES - PERGUNTAS FREQUENTES (FAQ): Índice: Perguntas Gerais, Configuração e Primeiros Passos, Registro / Inscrição, Informações Gerais sobre Wi-Fi, Como Usar o Wi-Fi, Período de Teste do Wi-Fi, Interação com o Aplicativo, Problemas de Serviço, Solução de Problemas, Inspeção do Nível de Recepção, Processos da Concessionária, Condições para o Partida Remota do Motor Não Funcionar, Condições para a Função de Partida Remota Desligar o Motor, Vídeos Educativos, Recursos
MAZDA CONNECTED SERVICES - PERGUNTAS FREQUENTES (FAQ): Índice: Perguntas Gerais, Configuração e Primeiros Passos, Registro / Inscrição, Informações Gerais sobre Wi-Fi, Como Usar o Wi-Fi, Período de Teste do Wi-Fi, Interação com o Aplicativo, Problemas de Serviço, Solução de Problemas, Inspeção do Nível de Recepção, Processos da Concessionária, Condições para o Motor Não Funcionar com Partida Remota, Condições para a Função de Partida Remota Desligar o Motor, Vídeos Educativos, Recursos
Some customers may experience the CHECK ENGINE light ON with DTC P0089:00 (Spill valve control solenoid valve control circuit range/performance problem) stored. This is caused by improper control software of the PCM detecting a false error, even with normal fuel pressure operation. To correct this issue, the control software of the PCM has been modified.
Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the Active Driving Display. Replace the Active Driving Display.
Beginning with the CX-5 and Mazda6 models, grip type front and rear stabilizer bushings have been incorpo-rated for noise prevention purposes. If any type of grease or lubrication is applied to the bushings, it may create noise due to bushing slippage.
Some vehicles may experience the check engine light on with DTCs P2096:00, P2097:00 and/or P0524:00 that cannot be cleared by itself, and the check engine light stays on even if the detection condition has gone. P2096:00 - Air fuel too lean P2097:00 - Air fuel too rich P0524:00 - Engine oil pressure too low. This concern may be caused by improper PCM control logic. The PCM software has been modified to eliminate this concern.
Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the Active Driving Display.
New IDs software version 102.00 and Update 102.01 is now available on MS3 IDs update 102.00 and 102.01 is now available on MS3 under the "IDs/Infotainment" tab.
Recall 0516j updated repair procedure
Windshield washer fluid change - Factory filled windshield washer fluid has been changed to an ethanol type (yellow color) instead of athe conventional methanol type (blue color). This change is for European compliance Mazda has decided to make the change for all markets.
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).