Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Mazda Tribute

2000–2011 · 2 gerações · 19 defeitos documentados · 4 mercados
Gerações

Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.

Ano do modelo
Tribute II · 2007–2011
BoletimCríticoMotorNA

Boletim

On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not an indication of an engine concern and will not cause reduced driveability or durability of the engine or any of its emission components. The sulfur smell or 'rotten egg' odor is caused by high amounts of sulfur in the gasoline being used in the vehicle. Sulfur is normally eliminated during the refining process, but the EPA regulation of sulfur in gasoline differs from state to state. Vehicles using fuel containing high amounts of sulfur will most likely emit sulfur smell from the exhaust system.When high sulfur fuel is burned, there is a chemical reaction in the catalytic converter causing the sulfur tooxidize. As the vehicle is driven, the oxidizing reaction odor in the converter will decrease with mileage and age.

NHTSA · boletim do fabricante10153311Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimCríticoMotorNA

Boletim

On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not an indication of an engine concern and will not cause reduced driveability or durability of the engine or any of its emission components. The sulfur smell or 'rotten egg' odor is caused by high amounts of sulfur in the gasoline being used in the vehicle. Sulfur is normally eliminated during the refining process, but the EPA regulation of sulfur in gasoline differs from state to state. Vehicles using fuel containing high amounts of sulfur will most likely emit sulfur smell from the exhaust system. When high sulfur fuel is burned, there is a chemical reaction in the catalytic converter causing the sulfur to oxidize. As the vehicle is driven, the oxidizing reaction odor in the converter will decrease with mileage and age.

NHTSA · boletim do fabricante10145242Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoOutroNA

Boletim

Em apoio à nova distribuição MRT, a Mazda enviará aos concessionários um novo Detector de Vazamentos de Diagnóstico de Dupla Finalidade a partir de março de 2019. Os vídeos de treinamento serão publicados no MGSS em breve, e os procedimentos do Manual de Oficina serão revisados gradualmente.

NHTSA · boletim do fabricante10154879Anos-modelo 2011Traduzido automaticamente · original: inglêsVer detalhes →
Tribute II · 2007–2011
BoletimModeradoSuspensãoNA

Boletim

Se um veículo apresentar vibração na carroceria ou trepidação do volante durante a condução e a causa raiz for determinada como balanceamento dos pneus, rebalanceie os pneus usando uma máquina de balanceamento Hunter GSP9700 ou equivalente. Se a sua concessionária não tiver uma máquina de balanceamento GSP9700 ou equivalente, encaminhe o veículo para reparo em outra oficina. Para encontrar a localização de uma GSP9700 perto da sua concessionária, visite o site da Hunter em www.gsp9700.com e clique em "Localize um Balanceador Road Force GSP9700".

NHTSA · boletim do fabricante10154139Anos-modelo 2011Traduzido automaticamente · original: inglêsVer detalhes →
Tribute II · 2007–2011
BoletimModeradoOutroNA

Boletim

This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is stacked one on top of another.

NHTSA · boletim do fabricante10153331Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoSuspensãoNA

Boletim

Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.

NHTSA · boletim do fabricante10153318Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoFreiosNA

Boletim

Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claims are subject to denial or debit. Tool Number Description Pricing PC1923MAZ Pro-Cut On-Car Brake Lathe Check eStore or call for current pricing OBTAINING TOOLS This tool can be ordered through Mazda eStore. You can log on to eStore at: http://dealers.mazdausa.com CUSTOMER SERVICE INFORMATION For warranty or product information contact Mazda Authorized Service Equipment at 877-768-6657. Customer service representatives are available from 7:30 AM until 7:00 PM CST, Monday through Friday. SPECIAL SERVICE TOOL (SST) PART NAME: OVERVIEW Pro-Cut On-Car Brake Lathe PART NUMBER: PC1923MAZ APPLICABLE MODELS: All USAGE: To machine brake rotors on the vehicle.

NHTSA · boletim do fabricante10153307Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoFreiosNA

Boletim

Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claims are subject to denial or debit.

NHTSA · boletim do fabricante10148003Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoFreiosNA

Boletim

Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claimsare subject to denial or debit.

NHTSA · boletim do fabricante10142515Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoSuspensãoNA

Boletim

Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.

NHTSA · boletim do fabricante10142519Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoOutroNA

Boletim

This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is stacked one on top of another. Use these points at your dealership to protect our mutual operations and to help ensure our customers' safety.

NHTSA · boletim do fabricante10134703Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoCarroceriaNA

Boletim

When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets (including O-ring), seals and covers are present and correctly installed. In most cases you will find that the Bulb Seal No. 1 (A) or HID Bulb Seal No. 1 (B) and Bulb Seal No. 2 (C) socket covers have not been correctly installed or are missing due to improper prior repairs (i.e., customer replacing the headlamp bulbs or body shop not transferring them when replacing the headlamp unit(s) due to a collision). Any damage caused by missing socket covers, HID module seal (D), or missing bumper brackets (E) is not covered by warranty policy.

NHTSA · boletim do fabricante10118468Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoFreiosNA

Boletim

Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) on certain 2009-2011 Tribute vehicles. On certain 2009-2011 Tribute vehicles, contamination on the internal motor contacts of the throttle body may result in intermittent electrical connectivity.If this condition is present, the Malfunction Indicator Lamp or Wrench Lamp will illuminate, and the vehicle may enter fail-safe mode. In this mode, the engine power and vehicle speed is reduced, while maintaining full functionality of the power steering, power braking, lighting, and climate control systems. To improve vehicle performance should the above problem occur, dealers must reprogram the Powertrain Control Module (PCM). Please refer to Attachment II for repair details.This SSP will be in effect until July 31, 2015 regardless of mileage.

NHTSA · boletim do fabricante10117770Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoFreiosNA

Boletim

Mazda Motor Corporation is extending the warranty coverage for throttle body replacement on certain 2009-2011 Tribute vehicles produced from April 14, 2008 through May 30, 2011. The warranty for throttle body replacement will be extended to 10 years (120 months) from the original warranty start date or 150,000 miles, whichever comes first. If a vehicle has already exceeded the time or mileage limits, this coverage will last through January 31, 2015. Affected vehicles may develop contamination on the internal motor contacts of the throttle body, resulting in intermittent electrical connectivity. If this condition is present, the Malfunction Indicator Lamp (MIL) or Wrench light will illuminate and the vehicle may enter a fail-safe mode. In this mode, engine power and vehicle speed are reduced, while full functionality of the power steering, power braking, lighting, and climate control systems are maintained. If diagnosis identifies the throttle body as the causal component, dealers are authorized to replace the throttle body under this warranty extension program.This service must be performed at no charge to the vehicle owner.

NHTSA · boletim do fabricante10117771Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoCarroceriaNA

Boletim

When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets are resent and correctly installed. In most cases you will find that the bulb seal no. 1 (a) or hid bulb seal no. 1 (b) and bulb seal no. 2 (c) socket overs have not been correctly installed or are missing due to improper prior repairs (i.E., customer replacing the headlamp bulbs or body shop not transferring them when replacing the headlamp unit(s) due to a collision). Any damage caused by missing socket covers, hid module seal (d), or missing bumper brackets (e) is not covered by warranty policy.

NHTSA · boletim do fabricante10105886Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoSuspensãoNA

Boletim

Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.

NHTSA · boletim do fabricante10101062Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoCarroceriaNA

Boletim

When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets are present and correctly installed. In most cases you will find that the bulb seal no. 1 (a) or hid bulb seal no. 1 (b) and bulb seal no. 2 (c) socket covers have not been correctly installed or are missing due to improper prior repairs (i.E., customer replacing the headlamp bulbs or body shop not transferring them when replacing the headlamp unit(s) due to a collision). Any damage caused by missing socket covers, hid module seal (d), or missing bumper brackets (e) is not covered by warranty policy.

NHTSA · boletim do fabricante10098885Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoSuspensãoNA

Boletim

Bulletin noteservice bulletin 06-001/14, 2008-2011 tribute - dtc b2278 stored in the power steering control module, is no longer valid. Service bulletin 06-001/14 has been superseded by safety recall 7614e, 2008-2011 tribute - electric power-assisted steering (epas).

NHTSA · boletim do fabricante10098346Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoOutroNA

Boletim

This service bulletin provides information regarding the proper use of the drivers floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is stacked one on top of another.

NHTSA · boletim do fabricante10098282Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoFreiosNA

Boletim

Mazda north american operations received many requests from our dealers asking us to approve additional on-car brake lathes as an option for mnao authorized equipment. Due to your feedback and after evaluating a few on-car brake lathes, we are pleased to announce that we have added the pro cut on-car brake lathe to mnao authorized equipment program. The accu-turn is still an approved brake lathe but it is no longer available for purchase from our vendor. Important reminder rotors must be machined using a mazda approved on-car brake lathe or warranty claims are subject to denial or debit.

NHTSA · boletim do fabricante10098245Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoOutroNA

Boletim

Some vehicles may exhibit an intermittent no crank, no start condition with no diagnostic trouble codes (dtc) or passive anti-theft system (pats) indicator flashing.

NHTSA · boletim do fabricante10097806Anos-modelo 2010–2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoCâmbioNA

Boletim

Some vehicles equipped with an automatic transmission gain enhanced flat tow performance with an optional transmission cooling pump kit for recreational towing. The kit is available from the parts department and will help prevent transmission overheating.

NHTSA · boletim do fabricante10097804Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoCâmbioNA

Boletim

Some vehicles may exhibit an occasional fluid leak coming from the rear differential vent cap in temperatures below 32 degrees fahrenheit (0 degrees celsius) under certain conditions.

NHTSA · boletim do fabricante10097801Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoSuspensãoNA

Boletim

Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.

NHTSA · boletim do fabricante10097722Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Tribute II · 2007–2011
BoletimModeradoSuspensãoNA

Boletim

Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.

NHTSA · boletim do fabricante10097377Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Mais antigos →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).