Em alguns interruptores de ignição, foi aplicada graxa em excesso em determinados pontos de contato. Para um veículo utilizado nessas condições, isso pode levar à carbonização da graxa se e, portanto, a um risco acrescido de incêndio.
Safety Gate · UE · RappelConso · França15 de dez. de 2022a12/00507/22Anos-modelo 2001–2002Traduzido automaticamente · original: francêsVer detalhes →
RecallCríticoInteriorNANão conduzir até à reparação
Mazda North American Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2004-2005 MPV, 2004 RX-8, and 2006-2007 Mazdaspeed6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
NHTSA · Estados Unidos31 de out. de 201919V781000Anos-modelo 2004–2005Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoInteriorNANão conduzir até à reparação
Mazda North America Operations (Mazda) is recalling certain 2005-2006 Mazda MPV vehicles sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. On July 9, 2019 this recall was expanded to include certain 2005-2009 RX-8 vehicles that were previously recalled under 17V-011 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
NHTSA · Estados Unidos15 de jun. de 201818V404000Anos-modelo 2005–2006Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoInteriorNANão conduzir até à reparação
Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia, West Virginia, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands. On July 9, 2019 this recall was expanded to include certain 2004-2011 RX-8 vehicles that were previously recalled under 16V-354 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
NHTSA · Estados Unidos15 de jun. de 201818V402000Anos-modelo 2004–2006Exibido no inglês original · tradução pendenteVer detalhes →
Note: The recall for the 2005-2008 RX-8 models has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018038">2018038 (Mazda Recall 2018A)</a>, and the recall for the 2005-2006 MPV models has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578 (Mazda Recall 2618F)</a>. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag inflator. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Additional note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Transport Canada10 de jan. de 20172017011Anos-modelo 2005–2006Exibido no inglês original · tradução pendenteVer detalhes →
Com o tempo, os contatos internos do interruptor de ignição podem se carbonizar e tornar-se condutores de eletricidade. Como resultado, o interruptor de ignição pode superaquecer, havendo risco de incêndio.
Safety Gate · UE6 de out. de 2016A12/1298/16Anos-modelo 1999Traduzido automaticamente · original: inglêsVer detalhes →
A graxa carbonizada pode se acumular entre os pontos de contato no interruptor de ignição, reduzindo o desempenho de isolamento no interior do interruptor. Nessa condição, o interruptor pode gerar calor, resultando em fumaça e, no pior dos casos, em incêndio.
DVSA · Reino Unido30 de set. de 2016R/2016/210Anos-modelo 1999–2002Traduzido automaticamente · original: inglêsVer detalhes →
Note: The recall for the 2004 RX-8 model has been superseded by <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018038">recall 2018-038 (Mazda Recall 2018A)</a>, and the recall for the 2004 MPV model has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578 (Mazda Recall 2618F)</a>. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Additional note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Transport Canada26 de mai. de 20162016259Anos-modelo 2004Exibido no inglês original · tradução pendenteVer detalhes →
Em alguns casos, na chave de ignição, foi aplicada graxa em quantidade excessiva aos contatos internos do interruptor. Como resultado, a graxa carboniza com o calor do arco elétrico gerado durante a operação do interruptor e se acumula entre o contato móvel e o contato fixo, reduzindo o isolamento interno do interruptor. Se o uso continuar nessas condições, os contatos podem ficar em curto, fazendo o interruptor aquecer e emitir fumaça, e, no pior dos casos, há risco de incêndio.
MLIT · Japão16 de out. de 20151136430Anos-modelo 1999–2003Traduzido automaticamente · original: japonêsVer detalhes →
The possibility exists that the power steering oil pump pulley retaining nut may become loose resulting if the vehicle continues to be driven in the pulley becoming detached. In the worst case due to loss of drive to the water pump the engine may seize.
DVSA · Reino Unido18 de set. de 2004R/2004/112Anos-modelo 2003Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the front passenger-side airbag was improperly wired and may not provide adequate protection in the event of a crash. Correction: Dealer will install a short wiring harness kit.
Transport Canada19 de fev. de 20042004067Anos-modelo 2004Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicle, the airbag warning labels on the sun visors are English only. This does not comply with the requirements of CMVSS 208. Correction: Mazda will mail owners corrected replacement labels and installation instructions.
Transport Canada29 de jul. de 20032003178Anos-modelo 2002–2003Exibido no inglês original · tradução pendenteVer detalhes →
On certain mini vans and passenger vehicles, the socket holder in the fog lights is installed in the lamp casing using pressure. During operation of the fog light, the heat from the bulb can expand the socket holder. The expansion can force the socket holder rearward. After repeatedly being subject to this expansion, if the fog light is also subjected to vibration during vehicle operation, the socket holder with the bulb holder and the wiring harness may separate from the fog light casing.
NHTSA · Estados Unidos5 de jun. de 200303V206000Anos-modelo 2002–2003Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the front fog light bulb socket was installed improperly. If the vehicle continues to operate with this condition, the bulb socket and the wiring harness may separate from the fog light housing as a result of exposure to vehicle vibration. Should this occur, the bulb socket and the harness can drop inside the bumper and in the worst case, the heat generated can cause the bumper to burn. Correction: Dealer will re-install the bulb socket properly.
Transport Canada25 de fev. de 20032003047Anos-modelo 2002–2003Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the diffuser may come off the inflator for the passenger air bag during deployment due to improper welding. Under these conditions, expanded gas cannot be supplied to the bag and may not deploy during a frontal crash. Correction: Dealers will replace the passenger side airbag with a correct one.
Transport Canada2 de ago. de 20022002145Anos-modelo 2001Exibido no inglês original · tradução pendenteVer detalhes →
Em alguns airbags do lado do passageiro, a solda da junta entre o difusor (dispositivo de dispersão) dentro do inflador (dispositivo de inflação) e o corpo do gerador de gás (gerador de gás) é inadequada. Por isso, quando o airbag é acionado, essa junta pode se soltar, fazendo com que o difusor se desprenda. Nesse caso, o gás de expansão não consegue ser fornecido à bolsa, o airbag não se abre e existe o risco de causar lesões excessivas ao ocupante em caso de colisão frontal.
MLIT · Japão1 de ago. de 20021108610Anos-modelo 2000Traduzido automaticamente · original: japonêsVer detalhes →
Certain vehicles have fuel injectors that do not match the lower intake manifold. This condition could potentially result in a fuel leak. In the presence of an ignition source, an engine compartment fire could occur. Correction: Dealers will replace the lower intake manifold with the correct one.
Transport Canada27 de jul. de 19991999138Anos-modelo 2000Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).