On certain mini vans and passenger vehicles, the socket holder in the fog lights is installed in the lamp casing using pressure. During operation of the fog light, the heat from the bulb can expand the socket holder. The expansion can force the socket holder rearward. After repeatedly being subject to this expansion, if the fog light is also subjected to vibration during vehicle operation, the socket holder with the bulb holder and the wiring harness may separate from the fog light casing.
NHTSA · Estados Unidos5 de jun. de 200303V206000Anos-modelo 2001–2003Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the front fog light bulb socket was installed improperly. If the vehicle continues to operate with this condition, the bulb socket and the wiring harness may separate from the fog light housing as a result of exposure to vehicle vibration. Should this occur, the bulb socket and the harness can drop inside the bumper and in the worst case, the heat generated can cause the bumper to burn. Correction: Dealer will re-install the bulb socket properly.
Transport Canada25 de fev. de 20032003047Anos-modelo 2001–2003Exibido no inglês original · tradução pendenteVer detalhes →
Certain vehicles do not comply with Regulation 6 - Statement of Compliance. Vehicles have an incorrect National Safety Mark (NSM). Correction: Since this non-compliance does not present a risk to vehicle safety, no further action will be taken.
Transport Canada28 de ago. de 20002000176Anos-modelo 1999–2000Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the fuel filler non-return valve may stick causing "fuel spit back" when filling the fuel tank. Correction: Dealers will replace the non-return valve with a modified version.
Transport Canada8 de mar. de 20002000060Anos-modelo 1999Exibido no inglês original · tradução pendenteVer detalhes →
Vehicle description: Passenger vehicles. The non-return valve installed at the lower end of the fuel filler pipe can stick due to insufficient clearance between the valve case and the valve shutter combined with the material properties of the fuel hose between the filler pipe and the fuel tank.
NHTSA · Estados Unidos7 de fev. de 200000V032000Anos-modelo 1999Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the fuel injector harness may contact the manifold at the EGR pipe due to variations in the length and routing of the injector harness. If the harness is damaged a short circuit may occur, blowing the fuse for the fuel injector, resulting in engine stalling. Correction: Injector harness will be rerouted or replaced if damaged.
Transport Canada8 de abr. de 19981998067Anos-modelo 1999Exibido no inglês original · tradução pendenteVer detalhes →
Vehicle description: Passenger vehicles equipped with 1.8 liter engines. As a result of the length and routing of the injector harness, it can contact the manifold at the egr pipe. If the harness is damaged, a short circuit can occur, blowing the fuse for the fuel injector.
NHTSA · Estados Unidos25 de mar. de 199898V066000Anos-modelo 1999Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).