Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Mercedes-BenzMercedes-Benz Classe CLK

1997–2008 · 2 gerações · 34 defeitos documentados · 2 mercados
Gerações

Tudo sobre o Mercedes-Benz Classe CLK, todas as gerações juntas: defeitos, recalls, boletins técnicos e discussões. Escolha uma geração para filtrar.

Defeitos mais graves

Ver tudo (34) →
m

Electrical system: problems reported by owners

39 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 1998–2002), typically at around 61,000 miles. Most often named: instrument cluster/panel (44%). Reported consequences: 4 fires, 1 injury.

✓ Análise Mecafile de dados oficiais1998–2002Exibido no inglês original · tradução pendenteVer detalhes →
m

Transmission and drivetrain: problems reported by owners

18 owners in the United States reported problems with the transmission and drivetrain of this car to NHTSA (model years 1999–2002), typically at around 70,000 miles. Most often named: automatic transmission (39%), automatic transmission:control module (tcm/pcm/tecm) (17%), automatic transmission:gear position indication (prndl) (17%). Reported consequences: 2 crashes, 1 fire.

✓ Análise Mecafile de dados oficiais1999–2002Exibido no inglês original · tradução pendenteVer detalhes →
m

Airbags: problems reported by owners

10 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1999–2002), typically at around 81,000 miles. Most often named: side/window (20%). Reported consequences: 7 crashes, 7 injuries.

✓ Análise Mecafile de dados oficiais1999–2002Exibido no inglês original · tradução pendenteVer detalhes →

Últimos recalls oficiais

Ver tudo (36) →
Classe CLK C209 · 2001–2008
RecallModeradoCarroceriaNA

Visibility:Sun/moon roof assembly

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please see the recall report for a complete list of models and model years. The glass sunroof panel may not be properly secured and can detach.

NHTSA · Estados Unidos19 de nov. de 202424V874000Anos-modelo 2003–2009Exibido no inglês original · tradução pendenteVer detalhes →
Classe CLK C208 · 1997–2002Classe CLK C209 · 2001–2008
RecallModeradoCarroceriaJP

車体

スライディングルーフのガラスパネルにおいて、製造管理が不適切なため、接着強度が不十分なものがある。そのため、ガラスパネルに浮きが発生し、最悪の場合、走行風により脱落して、後続車両の妨げになるおそれがある。

MLIT · Japão22 de jun. de 20231236290Anos-modelo 2000–2009Exibido no japonês original · tradução pendenteVer detalhes →
Classe CLK C208 · 1997–2002Classe CLK C209 · 2001–2008

Últimos boletins técnicos

Ver tudo (94) →
Classe CLK C209 · 2001–2008
BoletimLeveCarroceriaNA

Boletim

**Reclamação:** Ruído metálico/de batida na zona dos altifalantes das portas. **Causa:** Em análise. **Solução:** Para identificar a causa, remova primeiro o revestimento da porta. Se o ruído continuar a ocorrer mesmo com o revestimento da porta removido, prossiga com o diagnóstico na direção do altifalante e, se necessário, crie um caso TIPS com um vídeo informativo em anexo. **Observação:** Consulte este documento na reclamação de garantia e, após concluir o diagnóstico, selecione o código de avaria de acordo com o componente que está a causar o problema. Se o ruído parar quando o revestimento da porta for removido, proceda de acordo com LI72.10P067691. **Informação:** Neste caso, não utilize um código de avaria para os altifalantes na reclamação de garantia!

NHTSA · boletim do fabricante11038217Anos-modelo 2007–2008Traduzido automaticamente · original: inglêsVer detalhes →
Classe CLK C209 · 2001–2008
BoletimModeradoFreiosNA

Boletim

## Reclamação Visita repetida à oficina por vibração do veículo ao frear a partir de 60 MPH. NOTA: Embora o sintoma seja semelhante a uma vibração de pneu ou roda, geralmente é facilmente perceptível que se trata de algo claramente diferente, quer ocorra o tempo todo ou apenas durante a frenagem. ## Causa Embora a causa da vibração seja mais provavelmente um excesso de desvio lateral (runout) no disco de freio ou no cubo/rolamento da roda, o sistema como um todo precisa ser verificado quanto a outros possíveis fatores contribuintes. 1. Danos anteriores por colisão. 2. Tempo excessivo de veículo parado sem rotação dos componentes. 3. Desvio lateral (runout) do cubo/rolamento da roda. 4. A interface de fixação da roda foi apertada em excesso (não seguindo os procedimentos de torque do WIS). 5. Interfaces de fixação foram excessivamente modificadas (pintadas, entalhadas, empenadas, etc...). ## Solução Leia toda a planilha anexada antes de executar o procedimento. Após executá-lo, revise a última página e realize o trabalho de acordo com ela. NOTA: Este documento não é uma pré-autorização nem trata de garantia. Destina-se apenas a fins de diagnóstico. Caso haja dúvidas sobre como proceder OU se a planilha tiver sido executada e o veículo retornar com a mesma queixa, realize novamente as medições indicadas na planilha e abra um caso TIPS para a equipe de Carroceria, Chassi e Entretenimento.

NHTSA · boletim do fabricante11038186Anos-modelo 2007–2008Traduzido automaticamente · original: inglêsVer detalhes →
Classe CLK C209 · 2001–2008
BoletimModeradoFreiosNA

Boletim

Complaint Noises/ squealing from the service brake in various driving situations and ambient conditions. Cause Frictional vibrations Remedy The intent of this document is to reduce noise from high performance AMG brakes. AMG brakes are designed for performance under high load and in certain scenarios, can emit noise. Some scenarios are normal and some are induced by driving style like those listed below: Driving style such as two footed driving where the pad might be in constant contact with the rotor. Brake pressure and application style (stopandgo traffic with consistent light brake pressure riding brakes where the brakes cannot cool sufficiently between applications). This can cause the brake pads to glaze and have a smooth/glassy surface which can induce noise. When ambient temperatures rise during summer peak and during cooling and cold winter months. 1. Beginning Diagnostics: a) Check whether the complaint can be reproduced and at which axle or side the noises occur (ideally together with the customer while driving). b) Check the affected system for component wear, mechanical damage or localized overheating damage. Replace damaged components as necessary. c) Assess condition of brake rotors and pads per WIS and visually (i.e. long periods of stagnation, etc...). d) Clean brake components free of brake dust and debris. d) Secure vehicle on a lift. 1. Start the engine and depress the brake pedal 34 times. 2. Check each wheel to see if they turn freely by hand. 3. If a wheel is not turning freely by hand, this needs to be addressed prior to reassessing the noise concern. e) Check whether, apart from this document, an additional document exists for the specific model in question, and if so, work through it and then continue. 2. Specific Axle Work: NOTE: If the brake pad has a metal backing plate, there is no need to affix the adhesive film. Continue with applying chamfer and Molykote as instructed below. IMPORTANT: Be absolutely certain to not allow paste between friction surfaces of the pad and disc! a) If the noises are coming from the front axle. 1. Remove brake linings of front axle. 2. Clean all contact points on brake lining backing plate, including the brake lining guide pins and brake caliper/carrier. 3. Clean bonding surface (where pistons contact back of brake pad). Apply adhesive film to the backplate of the pistonside brake lining where the piston contacts the pad backing plate. See picture "Adhesive and Paste Application Area". 4. Be sure to remove both brown paper backing sides of the adhesive film, it is double sided adhesive film. 5. If adhesive is already installed on backing plate where pistons contact the back of the pad, you may gently scrape off and reapply a new adhesive or Molykote. Must not apply the Molykote on top of the adhesive. 6. Chamfer edges (gently round off sharp leading edges) on brake pads. Some pads have vertical grooves, these can be gently chamfered with a triangular file as well. See picture "Chamfering Technique". 7. Apply Molykote to the sides of the backing plate. See picture "Adhesive and Paste Application Area". 8. After installing the brake linings, actuate the brake for 30 seconds. b) If the noises are coming from the rear axle. 1. Remove brake pads of rear axle. 2. Clean all contact points on brake lining backing plate and brake caliper /carrier. 3. Clean bonding surface (where pistons contact back of brake pad). Apply adhesive film to the backplate of the pistonside brake lining. 4. Chamfer edges (round off sharp leading edges) on brake pads. See picture "Chamfering Technique". 5. Grease contact points (red areas on attachment "Rear Pad Grease Area") between brake lining and guide of brake caliper with Molykote. 3. Brake Bedding Process: a) Before trip, the mileage incurred must be clarified with the customer (approx. 30 miles). b) Select a suitable route so speeds of approximately 65 MPH can be achieved. c) If the vehicle is an AMG P3 Hybrid, switch off

NHTSA · boletim do fabricante11037487Anos-modelo 2008Exibido no inglês original · tradução pendenteVer detalhes →

Últimos tópicos do fórum

Nenhuma discussão ainda.

Os defeitos e as discussões são arquivados por geração: escolha uma acima para adicionar o seu.

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).