Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Mercedes-BenzMercedes-Benz Classe SLK

1996–2020 · 3 gerações · 20 defeitos documentados · 3 mercados
Gerações

Tudo sobre o Mercedes-Benz Classe SLK, todas as gerações juntas: defeitos, recalls, boletins técnicos e discussões. Escolha uma geração para filtrar.

Defeitos mais graves

Ver tudo (20) →
m
CríticoCarroceriaNAClasse SLK R170 · 1996–2004

Body and structure: problems reported by owners

13 owners in the United States reported problems with the body and structure of this car to NHTSA (model years 1998–2001), typically at around 79,000 miles. Most often named: body:roof and pillars (23%), body (23%). Reported consequences: 4 injuries.

✓ Análise Mecafile de dados oficiais1998–2001Exibido no inglês original · tradução pendenteVer detalhes →

Últimos recalls oficiais

Ver tudo (88) →
Classe SLK R171 · 2004–2011Classe SLK R172 · 2011–2020
RecallModeradoElétricaEU

Faulty configurations of the control units (traction systems, signal recording triggering modules, engine…

Faulty configurations of the control units (traction systems, signal recording triggering modules, engine control units and headlights) could cause one or more control units to malfunction, which could increase the risk of an accident. The exhaust emissions exceed the legal limits, posing a risk to the environment.

Safety Gate · UE20 de out. de 2022A12/01448/22Anos-modelo 2004–2015Exibido no inglês original · tradução pendenteVer detalhes →
Classe SLK R171 · 2004–2011
Classe SLK R172 · 2011–2020
RecallModeradoElétricaNA

Other

Issue: On certain vehicles equipped with the emergency calling (eCall) system, the SIM card for the communications module could disable itself. If this happens, the eCall system would not work properly when there is a crash or when the SOS button is pressed. Safety Risk: If the eCall system does not work in an emergency situation, there could be a delay in response from emergency services. Corrective Actions: Mercedes-Benz will notify owners by mail and send a wireless over-the-air software update to each vehicle. If the update cannot be completed successfully, you will be notified to schedule an appointment to have the update performed by a dealer.

Transport Canada20 de mai. de 20222022263Anos-modelo 2019–2021Exibido no inglês original · tradução pendenteVer detalhes →

Últimos boletins técnicos

Ver tudo (214) →
Classe SLK R171 · 2004–2011Classe SLK R172 · 2011–2020
BoletimLeveCarroceriaNA

Boletim

**Reclamação:** Ruído metálico/de batida na zona dos altifalantes das portas. **Causa:** Em análise. **Solução:** Para identificar a causa, remova primeiro o revestimento da porta. Se o ruído continuar a ocorrer mesmo com o revestimento da porta removido, prossiga com o diagnóstico na direção do altifalante e, se necessário, crie um caso TIPS com um vídeo informativo em anexo. **Observação:** Consulte este documento na reclamação de garantia e, após concluir o diagnóstico, selecione o código de avaria de acordo com o componente que está a causar o problema. Se o ruído parar quando o revestimento da porta for removido, proceda de acordo com LI72.10P067691. **Informação:** Neste caso, não utilize um código de avaria para os altifalantes na reclamação de garantia!

NHTSA · boletim do fabricante11038217Anos-modelo 2004–2017Traduzido automaticamente · original: inglêsVer detalhes →
Classe SLK R172 · 2011–2020
BoletimLeveCâmbioNA

Boletim

Complaint Customer complaints relating to automatic transmission 725.0 (NAG3 Classic /9GTRONIC automatic transmission) and 725.1 (NAG3 facelift/9GTRONIC automatic transmission facelift) For faster, more effective and more targeted diagnosis, Intelligent Predictive Repair (IPR) has been developed and integrated into XENTRY Diagnosis. This ensures an automated diagnosis process. Cause As part of the ongoing quality monitoring process and associated quality and damaged part appraisals, a high number of ineffective repairs have been discovered. Such ineffective repairs have a negative impact on all those involved. For the customer, it means high costs and long repair times and for the dealer, it may result in the warranty claim being rejected. Remedy General note: IPR is available for: NAG3 Classic (automatic transmission 725.0) NAG3 Classic AMG sport model (AMG 43 and AMG 53 with converter, automatic transmission 725.0) NAG3 Classic Hybrid (automatic transmission 725.0) NAG3 Classic AMG 63 (automatic transmission 725.0) NAG3 MOPF ISG2 (automatic transmission 725.1) NAG3 MOPF Hybrid (automatic transmission 725.1) NAG3 MOPF AMG sport model (AMG 53/AMG 53e with ISG48V2 & converter /hybrid, automatic transmission 725.1) NAG3 MOPF AMG 43/63 with engine 139/177 (automatic transmission 725.1) Steps for the Service Advisor: Important: The more information and detail that can be given to the workshop about the complaint, then the more effective the subsequent diagnosis with IPR can be. To this end, a detailed service reception questionnaire has been provided to help the Service Advisor ask the right questions about the complaint. Ask precise details about the customer complaint and the conditions and context. Fill out the service reception questionnaire (please see WIS document: OF27.00P300005A) for customer complaints in detail and forward it to the workshop. Operation steps for the workshop employee: 1. Perform quick test 2. Access the transmission control unit via XENTRY Diagnosis 3. Select "A customer complaint has been received" and carry out all subsequent operation steps (IPR diagnosis path). 4. The IPR repair instructions are displayed, Carry out the IPR repair instructions without performing any further diagnostic or repair steps. Important: The IPR repair instructions are binding and must be carried out. Differing repairs are possible; such repairs must be documented in XENTRY in free text. Please observe the information regarding the IPR diagnosis process in XENTRY. Conventional diagnosis and subsequent appropriate repairs are only permitted if IPR does not specify any repair instructions. Invoicing for the guided IPR steps: Operation item 270640 and 0.1 hours Notice regarding warranty: The use of IPR in association with warranty claims is mandatory! If the IPR repair instructions are disregarded without justification, the warranty claims may be rejected and/or are subject to debit. IPR will provide a measure to repair the vehicle based on various data sources (EEPROM, fault codes, etc). Please consider the vehicle maintenance record of the vehicle. For warranty and goodwill repairs, the transmission ECU test log and/or IPR test result must be uploaded into Paperless XENTRY Diagnosis (pXD) . If repair is being determined based of oil pan condition pictures of oil pan MUST be provided to warranty as justification. Tamperproof documentation: The IPR repair instructions are stored in the control unit log. Please file this document in a tamperproof manner either in digital form or as a hardcopy printout and also enclose a printout with the damaged part. In this regard, please comply with the countryspecific warranty requirements of the MPC/general distributor.

NHTSA · boletim do fabricante11038187Anos-modelo 2016–2017Exibido no inglês original · tradução pendenteVer detalhes →
Classe SLK R171 · 2004–2011Classe SLK R172 · 2011–2020
BoletimModeradoFreiosNA

Boletim

## Reclamação Visita repetida à oficina por vibração do veículo ao frear a partir de 60 MPH. NOTA: Embora o sintoma seja semelhante a uma vibração de pneu ou roda, geralmente é facilmente perceptível que se trata de algo claramente diferente, quer ocorra o tempo todo ou apenas durante a frenagem. ## Causa Embora a causa da vibração seja mais provavelmente um excesso de desvio lateral (runout) no disco de freio ou no cubo/rolamento da roda, o sistema como um todo precisa ser verificado quanto a outros possíveis fatores contribuintes. 1. Danos anteriores por colisão. 2. Tempo excessivo de veículo parado sem rotação dos componentes. 3. Desvio lateral (runout) do cubo/rolamento da roda. 4. A interface de fixação da roda foi apertada em excesso (não seguindo os procedimentos de torque do WIS). 5. Interfaces de fixação foram excessivamente modificadas (pintadas, entalhadas, empenadas, etc...). ## Solução Leia toda a planilha anexada antes de executar o procedimento. Após executá-lo, revise a última página e realize o trabalho de acordo com ela. NOTA: Este documento não é uma pré-autorização nem trata de garantia. Destina-se apenas a fins de diagnóstico. Caso haja dúvidas sobre como proceder OU se a planilha tiver sido executada e o veículo retornar com a mesma queixa, realize novamente as medições indicadas na planilha e abra um caso TIPS para a equipe de Carroceria, Chassi e Entretenimento.

NHTSA · boletim do fabricante11038186Anos-modelo 2004–2017Traduzido automaticamente · original: inglêsVer detalhes →

Últimos tópicos do fórum

Nenhuma discussão ainda.

Os defeitos e as discussões são arquivados por geração: escolha uma acima para adicionar o seu.

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).