Motorrijtuigen - carrosserie (beschermingsmiddelen inzittenden)
De veiligheidsgordels linksachter en/of rechtsachter zijn mogelijk niet correct vervaardigd.
🔔 Crie uma conta gratuita para receber alertas por e-mail sobre Mini Countryman (todas as gerações)
De veiligheidsgordels linksachter en/of rechtsachter zijn mogelijk niet correct vervaardigd.
BMW of North America, LLC is recalling certain 2026 2 Series Gran Coupe, X1, X2, and Mini Countryman S ALL4 vehicles. The housing pin in the rear (left and/or right) seat belt retractors may have been damaged during production, resulting in the retractor not locking the seat belt as intended. As such, these vehicles fail to comply to Federal Motor Vehicle Safety Standard number 209, "Seat Belt Assemblies."
As cintas de segurança dianteiras podem não ter sido fabricadas corretamente.
A remórendszer esetleg rossz hegesztési varrattal készült, és nagy fékezőnyomás esetén meghibásodhat, aminek következtében a fékrásegítő kiesik. Wait, I must translate to Portuguese, not Hungarian. Corrected: O sistema de travagem pode ter uma soldadura defeituosa e, sob alta pressão de travagem, pode ceder, fazendo com que o servofreio deixe de funcionar.
Het frontend is mogelijk niet goed vastgeschroefd.
BMW of North America (BMW) está convocando para recall determinados veículos dos modelos 2023-2024 X1, 2024-2025 X5, 2025 X6, 2023-2025 X7, 740i, 760i, 2024 XM, 530i, 540i, i7, 750e, X2, 2024-2025 i5, 2024 Rolls Royce Spectre, 2025 MINI Countryman S ALL4, JCW Countryman ALL4 e 2025 MINI Hardtop 2 Door (Cooper, Cooper S). Consulte o relatório de recall para a lista completa de modelos. As soldas no servomotor do módulo integrado de controle de freios podem se romper, causando perda da assistência de freio a potência e da função dos freios traseiros. Além disso, o sistema de freios antibloqueio (ABS) e o sistema de controle de estabilidade dinâmica (DSC) podem deixar de funcionar.
In the production process, the armrest support bracket may have been incorrectly screwed to the rear left or right door panel. In the event of an accident, the armrest bracket can become detached, damaging the thorax airbag in the deployment area. This increases the risk of injuries to the vehicle's occupants.
Des défauts dans l’enroulement des feuilles internes cellulaires dans les batteries haute tension peuvent entraîner l’apparition d’une augmentation de l’autodécharge. cela peut entraîner une surchauffe des modules de cellules haute tension, ce qui augmente le risque d’incendie.
A fivela do cinto pré-tensor pode não funcionar em caso de acidente, e existe a possibilidade de formação de faíscas quando o pré-tensor for acionado.
BMW of North America, LLC (BMW) is recalling certain 2021 2 Series (230i, 230i xDrive, M240i, M240i xDrive), 330e, 330e Xdrive, 4 Series Coupe (430i, 430i xDrive, M440i xDrive) M4 Coupe, M4 Competition Coupe, BMW 4 Series Convertible (430i, M440i), BMW X1 sDrive28i, xDrive28i, 2 Series Gran Coupe (228i, 228i xDrive, M235i xDrive), M2 Competition Coupe, 330i, 330i xDrive, M340i, M340i xDrive, M3, M3 Competition, 530i, 530i xDrive, 540i, 540i xDrive, MINI Hardtop 2 Door (Cooper, CooperS, JCW), X2 sDrive28i, X2 xDrive28i, X2 M35i, Z4 sDrive30i, Z4 M40i, MINI Hardtop 2 Door (Cooper SE), MINI Convertible (Cooper, Cooper S, JCW), MINI Clubman (Cooper S, Cooper S All4, JCW), MINI Countryman (Cooper, Cooper All4, Cooper S, Cooper S All4, JCW All4), Rolls Royce Ghost, MINI Countryman (Cooper S E All4), Rolls Royce Phantom, Rolls Royce Cullinan, and Toyota Supra vehicles. The passenger seat belt Automatic Locking Retractor (ALR) may deactivate early, before the webbing fully retracts. As such, these assemblies fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
De HV accucellen hebben mogelijk een productiefout.
De las verbinding van de HV accucellen is mogelijk niet juist gelast.
A short circuit in the high-voltage battery could occur during initial charging due to a particle in the form of a welding bead. This may trigger a chain reaction in the battery, increasing the risk of fire.
A BMW of North America, LLC (BMW) está a recolher certos veículos 530e, 530e xDrive, 530e iPerformance e X3 xDrive30e e MINI Cooper Countryman All4 SE, BMW i8 2020, e 2021 330e, 330e xDrive, 745Le xDrive e X5 xDrive45e de 2020. Detritos podem ter entrado numa ou mais células híbridas da bateria durante a sua produção.
BMW of North America, LLC (BMW) is recalling certain 2021 330e and X5 xDrive45e, 2020-2021 X3 xDrive30e, and 2020 MINI Countryman SE ALL4 vehicles. Loose welding beads may form a conductive path between the hybrid battery cells which could lead to a short-circuit.
Issue: On certain vehicles, the steering tie rod ends may not be assembled correctly and could be missing a washer. Over time, this may cause excessive wear to the tie rod ends and cause them to break. This could result in a loss of steering control. Safety Risk: A loss of steering control could create a risk of a crash. Corrective Actions: BMW will notify owners by mail and instruct them to take their vehicle to a dealer to inspect, and if necessary, replace the tie rods and ball joints.
Em determinados veículos, um erro no sensor de rotação do virabrequim pode fazer com que o motor pare. Isso resultaria em perda de força motriz, o que poderia aumentar o risco de um acidente com lesões e/ou danos materiais. Correção: As concessionárias substituirão o sensor de rotação do virabrequim. Nota: Essa condição faria com que a luz de advertência de verificação do motor acendesse e uma mensagem de “falha no motor” aparecesse no painel de instrumentos. Nota: Este é um desdobramento do recall 2018-373.
A bomba de combustível de alta pressão pode não estar equipada com uma placa de proteção. Por isso, durante uma colisão, a bomba de alta pressão pode ficar danificada.
BMW of North America, LLC (BMW) is recalling certain 2017-2019 MINI Cooper Countryman vehicles. These vehicles may be missing a crash protection plate near the high pressure fuel pump, which may result in a fuel leak in the event of a crash.
Certain vehicles, which were parked at the port of entry in Halifax during the ice storms in February 2015, may have been exposed to excessive standing water and salt for an extended period due to this isolated environmental incident. Certain MINI models could have corrosion at the starter motor power supply cable connectors, which could lead to the inability to restart the engine following an engine shutdown by the start-stop (MSA) system, increasing the risk of crash causing injury in a traffic situation. On certain BMW models, the lubrication of some internal components within the steering rack may have been exposed to excessive water or salt which could result in higher than normal steering effort or steering binding, increasing the risk of a crash causing injury and/or damage to property. In addition, electrical wires and/or connectors in all affected vehicles may have been exposed to water or salt, which could lead to increased electrical system resistance, and increase the risk of fire causing injury and/or damage to property. Correction: Owners should contact their selling Retailer regarding this recall. Affected vehicles will be inspected. Some vehicles will be taken out of service immediately and owners will be provided with temporary transportation until a new replacement vehicle is available. All other vehicles are cleared of this safety concern and may continue to be driven until a new replacement vehicle is available. Due to potential concerns about long term vehicle quality, all affected vehicles will ultimately be removed from service.
In certain conditions moisture could gain entry into the wiring connector that powers the Electronic Power Steering (EPS) and the EPS unit. This moisture can then in very rare cases penetrate the EPS through the ground pin and cause overheating of the ground connector pin which can in turn lead to fire.
A extremidade dianteira pode não estar corretamente aparafusada ao subchassi do motor. Se um dos parafusos não tiver sido devidamente apertado e se soltar, a segurança do veículo pode ser comprometida em caso de colisão frontal. Nesse caso, pode haver um risco aumentado de ferimentos. Além disso, um parafuso solto pode representar um risco de acidente para o tráfego que segue.
Os cintos de segurança do veículo não foram fabricados corretamente. Em caso de colisão ou acidente, a função de retenção dos cintos de segurança pode ser reduzida e não fornecer a proteção necessária. Consequentemente, pode haver um risco aumentado de lesões.
O eixo oco do servofreio foi mal soldado. A soldadura pode não ser capaz de resistir à acumulação de pressão de travagem elevada e pode partir-se. Nesse caso, o desempenho de travagem reduzido exige maior força e a distância de travagem pode aumentar. Além disso, os sistemas de controlo de travagem ABS e DSC deixam de ser assistidos. Isto aumenta o risco de acidente.
Para determinados veículos, o BMW Group desenvolveu um pacote de medidas (hardware e software) para o sistema de controlo de emissões do MINI R60/R61.
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).