Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Nissan Note I

2004–2013 · 15 defeitos documentados · 3 mercados
Ano do modelo
RecallCríticoInteriorUK

Abnormal deployment of passenger airbag

The subject vehicles are equipped with front passenger�airbag�inflators which could have been assembled with improperly manufactured propellant This could cause the inflator to rupture and the front passenger�airbag�to deploy abnormally in a crash. This could result in increased risk of injury to the occupant.

DVSA · Reino Unido28 de nov. de 2017R/2017/226Anos-modelo 2005–2011Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoInteriorUK

Drivers airbag may rupture if deployed

In the event of driver�s airbag deployment the internal pressure of inflator may increase abnormally and in an extreme case cause the driver�s airbag inflator casing to rupture. In an extreme case this may cause a scattering of metal fragments.

DVSA · Reino Unido15 de fev. de 2016R/2015/256Anos-modelo 2005–2011Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoSuspensãoUK

Loss of steering control

The lower pinion needle bearing may have been omitted during manufacture of the steering gear due to insufficient controls in the suppliers manufacturing process. It is possible the pinion may disengage from the steering gear with loss of steering control.

DVSA · Reino Unido4 de ago. de 2015R/2015/135Anos-modelo 2008Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoSuspensãoEU

null There is a possibility that the lower pinion needle bearing may have been omitted from the steering…

null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this is the case, the upper bearing would be overloaded and, if left in this condition, the pinion may disengage causing loss of steering control.

Safety Gate · UE3 de jul. de 2015A12/0872/15Anos-modelo 2003–2008Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoOutroJP

Outros (Outros)

Na inspeção final realizada na fábrica de fabricação de veículos, houve casos em que a aprovação ou reprovação foi determinada por inspetores não nomeados, e as inspeções relativas às normas de segurança, meio ambiente e desempenho (padrões de segurança) não foram conduzidas adequadamente.

MLIT · Japão29 de jun. de 20181142870Anos-modelo 2003–2011Traduzido automaticamente · original: japonêsVer detalhes →
RecallModeradoOutroJP

その他(その他)

車両製作工場の完成検査において、任命されていない検査員が合否判定を行ったものがあり、安全環境性能法規(保安基準)に関する検査が適切に行われていなかった。

MLIT · Japão6 de out. de 20171141260Anos-modelo 2009–2011Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoCarroceriaJP

後写鏡

ドアミラーにおいて、鏡面部の接着力が不足しているため、使用過程における紫外線の影響等により、接着力が低下して接着面が剥離するものがある。そのため、そのままの状態で使用を続けると、最悪の場合、鏡面部が脱落して、後方の交通状況等が確認できなくなるおそれがある。

MLIT · Japão11 de dez. de 20141134850Anos-modelo 2010–2011Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoFreiosJP

主ブレーキ一般

後輪ブレーキのアッパースプリング製造工程において、治具の形状が不適切なためスプリングに傷がついたものがある。そのため、そのまま使用を続けると、当該アッパースプリングが折損し、最悪の場合、ブレーキを解除しても制動力が完全に解除されないおそれがある。

MLIT · Japão4 de set. de 20141134262Anos-modelo 2010–2011Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoFreiosUK

Brakes may not perform correctly

It is possible that the vehicles brake fluid maybe contaminated with mineral oil. This can cause the seals within the system to swell and affect their sealing properties. This may require drivers to apply additional force to the foot brake and could increase stopping distances.

DVSA · Reino Unido16 de dez. de 2010R/2010/226Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoElétricaJP

その他(電気装置)

エンジン制御用電源リレーにおいて、リレーに内蔵されているダイオードの製造方法が不適切なため、導通不良となるおそれがある。そのため、そのままの状態で使用を続けると、エンジン始動不良や走行中にエンストするおそれがある。

MLIT · Japão28 de out. de 20101126350Anos-modelo 2003–2006Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoElétricaJP

コンピュータ(エンジ

エンジン製造時の検査工程において、検査用電気配線の端子部を変形させたため、エンジン側の電気配線の端子が変形しているものがある。そのため、そのままの状態で使用を続けると、当該配線が接触不良となり、最悪の場合、走行中にエンストして再始動出来なくなるおそれがある。

MLIT · Japão25 de fev. de 20101124700Anos-modelo 2007–2008Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoMotorUK

Fuel may leak from particulate filter

It has been identified that a connector in the diesel particulate filter fuel system may not be correctly attached. If this is ignored fuel may leak from the connector during a particulate filter regeneration cycle.

DVSA · Reino Unido8 de dez. de 2008R/2008/174Anos-modelo 2008Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoCâmbioJP

クラッチ

無段変速機の前進用クラッチハブの強度が不足しているものがある。そのため、そのまま使用を続けると、当該ハブに亀裂が発生し、最悪の場合、ハブが破断して、前進できなくなるおそれがある。

MLIT · Japão7 de jun. de 20071118870Anos-modelo 2005–2007Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoInteriorUK

Os suportes ISOFIX do banco traseiro podem não funcionar conforme projetado em caso de impacto lateral.

A preocupação identificada diz respeito aos suportes ISOFIX dos bancos traseiros de alguns veículos E11 Note. Os suportes podem ter sido fabricados incorretamente, com o risco de não desempenharem conforme a intenção de projeto em caso de impacto lateral. Além disso, os suportes podem não estar em conformidade com a legislação CE exigida.

DVSA · Reino Unido26 de jul. de 2006R/2006/117Anos-modelo 2006Traduzido automaticamente · original: inglêsVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).