Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Porsche 944

1982–1991 · 1 gerações · 2 defeitos documentados · 2 mercados
Gerações
Todas as gerações9441982–19912158
Ano do modelo
MercadoTodosJPNA
RecallCríticoOutroJP

その他(その他)

音響機器のオーディオ本体(メーカー:ソニー(株)、型式:XR-5H911,XRー5H912)の配 線基板において、当該基板の製造工程が不適切なため、コンデンサーが損傷しているもの があり、そのままの状態で使用を続けると、当該コンデンサーの端子間が短絡して、スピ ーカーに過大な電流が流れ発熱し、最悪の場合、火災に至るおそれがある。

MLIT · Japão7 de dez. de 19991207700Anos-modelo 1990–1991Exibido no japonês original · tradução pendenteVer detalhes →
RecallCríticoElétricaJP

その他(その他)

音響機器のオーディオ本体の配線基盤において、当該基盤の製造工程が不適切なため、コ ンデンサが損傷しているものがあり、そのままの状態で使用を続けると、当該コンデンサ の端子間が短絡して、スピーカーに過大な電流が流れ、最悪の場合、火災にいたるおそれ がある。

MLIT · Japão19 de dez. de 19971206650Anos-modelo 1990–1992Exibido no japonês original · tradução pendenteVer detalhes →
RecallCríticoMotorNA

Fuel System

The short section of high pressure fuel hose between the fuel rail and the fuel pressure regulator, which runs alongside the intake manifold, may be subject to hardening. In the event that this line does harden, fuel leaks could develop between the hose and metal pipe fittings. Leaking fuel could ignite on the hot exhaust system and lead to an engine compartment fire. Correction: Fuel hose will be replaced on 924s, 944 and 944 turbo vehicles and the fuel hose and fuel rail will be replaced on 944s vehicles.

Transport Canada4 de abr. de 19901990051Anos-modelo 1985–1988Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoMotorNA

Fuel system, gasoline:Fuel injection system:Fuel rail

The hose material used in the short section of the high pressure fuel line hose, between the fuel rail and fuel pressure regulator, is subject to hardening, and could cause fuel leaks between the hose and the metal pipe fittings.

NHTSA · Estados Unidos2 de abr. de 199090V061000Anos-modelo 1985–1988Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoMotorNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

The protective sleeve covering of the return fuel hose between the pressure regulator and fuel return pipe was shortened leaving part of the hose exposed. In some instances this part of the hose becomes kinked due to the engine compartment heat and/or the routing of the hose. Consequence of defect: If this occurs it could restrict and damage the return fuel hose which could lead to fuel leakage and cause an engine compartment fire.

NHTSA · Estados Unidos12 de jun. de 198686V077000Anos-modelo 1986Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoMotorNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

Fuel hose may be damaged due to too much pressure in crimping the hose end fitting. Consequence of defect: A fuel leak could develop which could cause a loss in system pressure and engine stalling. Also, fuel vapors in the engine compartment could be ignited by a spark and cause a fire.

NHTSA · Estados Unidos9 de abr. de 198585V039000Anos-modelo 1985Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoCarroceriaJP

ワイパー

左ハンドル車において、前面ガラス用窓拭器のモーター上部に取り付けられているカバ ーの形状が小さいため、当該モーター内部に水が入り、このままの状態で使用を続けると 、最悪の場合、窓拭器が作動不能になるおそれがある。

MLIT · Japão17 de nov. de 19941205370Anos-modelo 1990–1991Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoCarroceriaNA

Visibility:Windshield wiper/washer:Motor

The plastic cowl cover was not sealed to the body at the base of the windshield. Water can leak and reach the windshield wiper motor, causing internal corrosion and failure of the wiper motor.

NHTSA · Estados Unidos6 de mai. de 199494V088000Anos-modelo 1991Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoSuspensãoNA

Suspension

Front tracking control arms on these vehicles bearing the identification code "sm" could crack and eventually break. The breakage of the front tracking control arm while driving may result in loss of control and a vehicle crash without prior warning. Correction: Vehicles will be inspected and front tracking control arms with the "sm" identification code will be replaced.

Transport Canada14 de ago. de 19891989113Anos-modelo 1988Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoSuspensãoNA

Suspension:Front:Control arm:Lower arm

The alloy a-arms may have a manufacturing casting defect and could crack and break after mileage accumulation.

NHTSA · Estados Unidos10 de ago. de 198989V133000Anos-modelo 1988Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoSuspensãoNA

Recall

The rear spring plates (radius arms) on these vehicles may have been improperly tempered by supplier. Improperly hardened spring plates could crack and possibly break . This could affect lateral guidance of the corresponding rear wheel resulting in loss of vehicle control.

Transport Canada9 de out. de 19851985110Anos-modelo 1983Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoSuspensãoNA

Suspension:Rear:Springs:Leaf spring assembly

Rear spring plates may not have been tempered and are not of the proper hardness value. Consequence of defect: The plates could crack and/or break, affect lateral guidance of the rear wheel, and result in loss of control of the car which may cause an accident.

NHTSA · Estados Unidos26 de jul. de 198585V095000Anos-modelo 1983Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoMotorNA

Recall

The fuel supply hose to the pressure damper in the engine compartment may develop a leak between the flex hose and the threaded connector due to improper crimping of the fitting. This will cause the fuel pressure in the injection system to drop, resulting in engine stalling. A stalled vehicle could pose a threat to traffic safety.

Transport Canada12 de abr. de 19851985040Anos-modelo 1985Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoCarroceriaNA

Vehicle speed control:Linkages

Metal bushings for the cruise control linkage are subject to corrosion due to weather conditions. Also, there is not enough clearance between the bushings and the shaft; and the linkage points were not lubricated. Thus, cruise control linkage can bind, causing the accelerator pedal to stick in a depressed position. Consequence of defect: The vehicle, without warning, would continue at set speed and can't be reduced. This could result in loss of control and an accident.

NHTSA · Estados Unidos1 de mar. de 198585V023000Anos-modelo 1984–1985Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoInteriorNA

Seat belts:Front:Retractor

The rear seat belts do not include emergency-locking or automatic-locking retractors. The belts do not comply with federal motor vehicle safety standard no. 208, "occupant crash protection".

NHTSA · Estados Unidos26 de out. de 198383V111000Anos-modelo 1983–1984Exibido no inglês original · tradução pendenteVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).