Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

SaabSaab 5

1997–2011 · 2 gerações · 15 defeitos documentados · 3 mercados
Gerações
Ano do modelo
5 I · 1997–20095 II · 2009–2011
RecallCríticoInteriorNA

Airbag

On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the driver airbag inflator on Saab 9-3 and 9-5 vehicles and replace the driver airbag module on Saturn Astra vehicles.

Transport Canada3 de fev. de 20162016052Anos-modelo 2006–2009Traduzido automaticamente · original: inglêsVer detalhes →
5 I · 1997–20095 II · 2009–2011
RecallCríticoInteriorNA

Airbags:Frontal:Lado do motorista:Módulo do inflador

General Motors LLC (GM) está convocando para recall determinados veículos Saab 9-3 do ano-modelo 2006 a 2011, fabricados de 31 de maio de 2002 a 15 de fevereiro de 2011, veículos Saab 9-5 do ano-modelo 2006 a 2009, fabricados de 7 de junho de 2005 a 28 de maio de 2009, e veículos Saturn Astra do ano-modelo 2008 a 2009, fabricados de 11 de abril de 2007 a 24 de julho de 2008. Ao ocorrer a inflação do airbag frontal do motorista, a pressão interna excessiva pode fazer com que o inflador se rompa.

NHTSA · Estados Unidos3 de fev. de 201616V063000Anos-modelo 2006–2009Traduzido automaticamente · original: inglêsVer detalhes →
5 II · 2009–2011
RecallCríticoSuspensãoUK

Airbag do volante pode não funcionar corretamente em uma colisão

Foi identificado que, na improvável eventualidade de uma colisão que exija a ativação do airbag do motorista, é possível que o módulo do airbag do motorista se desprenda de sua fixação na placa da buzina do volante.

DVSA · Reino Unido3 de dez. de 2010R/2010/214Traduzido automaticamente · original: inglêsVer detalhes →
5 I · 1997–2009
RecallCríticoMotorUK

Fuel may leak - fire may occur

Fuel may leak from the return hose because it is not to specification and will age/crack prematurely. In the worst case fire may occur.

DVSA · Reino Unido26 de jan. de 2009R/2008/188Anos-modelo 2006–2008Exibido no inglês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallCríticoMotorJP

燃料ホース/パイプ

燃料ホースと燃料ポンプの組付けが不適切なものがあり、燃料ホース取付け部に応力がかかるものがある。そのため、そのままの状態で使用を続けると、最悪の場合、車両の振動等により当該取付け部が折損し、燃料が漏れるおそれがある。

MLIT · Japão29 de mai. de 20071214060Anos-modelo 1999–2007Exibido no japonês original · tradução pendenteVer detalhes →
5 I · 1997–2009
5 I · 1997–2009
RecallCríticoElétricaNA

Electrical system:Ignition:Module

Certain passenger vehicles equipped with b308 6-cylinder gasoline engines may experience overheating and burnout of the isolated gated bipolar transistor (igbt) within the ignition discharge module (idm) due to increased susceptibility to electrical loads.

NHTSA · Estados Unidos26 de out. de 200606V410000Anos-modelo 2002–2003Exibido no inglês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallCríticoElétricaNA

Electrical

Certain 2000-2002 Saab 9-3 and 9-5 model vehicles equipped with 4-cylinder gasoline engines, and 2001-2003 9-5 models equipped with 6-cylinder gasoline engines may experience overheating and burnout of the Isolated Gated Bipolar Transistor (IGBT) within the Ignition Discharge Module (IDM) due to increased susceptibility to electrical loads. Overheating of the IGBT occurs most often at engine start-up but may also occur while the engine is running. When the IDM fails on a 4-cylinder while it is running, the engine may stall without warning, with no ability to be restarted. When the IDM fails on a 6-cylinder engine while it is running, the driver will initially experience reduced power and rough operation because the engine will only be running on three cylinders. The check engine light will flash. If the driver continues, unburnt fuel in the exhaust can cause thermal damage to the catalytic converter. The engine may stall and not restart. Correction: Dealers will inspect and, if required, replace the IDM.

Transport Canada20 de set. de 20052005271Anos-modelo 2000–2003Exibido no inglês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallCríticoElétricaNA

Electrical system:Ignition:Module

Certain passenger vehicles equipped with b205/b235 4-cylinder gasoline engines and b308 6-cylinder gasoline engines may experience overheating and burnout of the isolated gated bipolar transistor (igbt) within the ignition discharge module (idm) due to increased susceptibility to electrical loads.

NHTSA · Estados Unidos14 de set. de 200505V399000Anos-modelo 2000–2002Exibido no inglês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallCríticoSuspensãoNA

Wheels:Hub

On certain passenger vehicles, if an owner changes their wheels/tires between summer and winter using a steel wheel in the winter and an alloy wheel in the summer, it is possible for rust and contamination to build up on the wheel hub during the steel wheel usage. If this occurs and the contamination is not removed, it is possible that after the tire change service, some of this contamination could flake or grind away resulting in reduced clamping force of the wheel to the hub. Over several seasons, it is possible that this reduced force could result in fractures developing in the wheel bolts due to wheel to hub movement.

NHTSA · Estados Unidos13 de jan. de 200303V006000Anos-modelo 1999–2003Exibido no inglês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallCríticoSuspensãoNA

Steering:Linkages:Knuckle:Spindle:Arm

The steering knuckle castings on certain passenger vehicles may have been contaminated during the casting process.

NHTSA · Estados Unidos4 de jan. de 200202V006000Anos-modelo 2002Exibido no inglês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallCríticoMotorJP

潤滑装置

原動機において、潤滑油の油圧センサに一部製造不良のものがあり、そのままの状態で 使用を続けると、当該油圧センサに亀裂が生じ、潤滑油が漏れ、最悪の場合、火災に至る おそれがある。

MLIT · Japão20 de jan. de 20001207800Anos-modelo 1998–1999Exibido no japonês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallModeradoElétricaJP

その他(電気装置)

点火装置において、高電圧発生モジュールのトランジスタの耐久性が不足しているため、電気負荷の繰り返しによりトランジスタが破損し、原動機が停止するおそれがある。

MLIT · Japão2 de jul. de 20081215030Anos-modelo 2002–2003Exibido no japonês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallModeradoInteriorNA

Seats:Front assembly:Head restraint

Saab is recalling 57,389 my 2002-2008 9-5 series vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 201, "occupant protection in interior impact." during compliance testing, one of the upper interior occupant protection test points exceeded the standard's requirements.

NHTSA · Estados Unidos9 de abr. de 200808V160000Anos-modelo 2002–2008Exibido no inglês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallModeradoSuspensãoJP

かじ取リンク機構

左側ナックルアームにおいて、鋳造工程が不適切なため、強度が不足しているものがある。そのため、そのままの状態で使用を続けると、当該ナックルに亀裂が生じ、最悪の場合、折損してかじ取り操作が出来なくなるおそれがある。

MLIT · Japão21 de jul. de 20061213220Anos-modelo 2002Exibido no japonês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallModeradoMotorJP

ブローバイ装置

ブローバイホース(クランクケースブリーザーホース)の取付け方法が不適切なため、原動機の振動等により当該ホースが外れ、ブローバイガスが大気中に放出されるおそれがある。

MLIT · Japão15 de abr. de 20051212180Anos-modelo 2003–2004Exibido no japonês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallModeradoCarroceriaJP

方向指示器

前面方向指示器において、灯器の取り付け方法が不適切なため、走行時の振動等により、 当該方向指示器が車体から外れるおそれがある。

MLIT · Japão7 de mar. de 20031210050Anos-modelo 2002Exibido no japonês original · tradução pendenteVer detalhes →
5 II · 2009–2011
RecallModeradoOutroUK

Detachable tow bar may become insecure.

Under certain conditions the detachable tow bar may work loose resulting in the tow bar becoming detached from the vehicle.

DVSA · Reino Unido10 de jan. de 2003R/2003/005Exibido no inglês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallModeradoSuspensãoNA

Suspension

On certain vehicles, when changing back and forth between alloy and steel wheels (as for winter tires), rust and other contaminates may build up on the mating surface of the wheel hubs. If this surface is not cleaned between wheel changes, uneven torque forces may cause wheel bolts to fracture. Although this is most likely to happen during wheel change service, it is possible that the bolts may break later while the vehicle is being driven. Correction: Dealer will clean the hub and reinstall the wheel with improved bolts and attached washers that will eliminate the clamping force reduction.

Transport Canada23 de dez. de 20022002247Anos-modelo 1999–2003Exibido no inglês original · tradução pendenteVer detalhes →
5 II · 2009–2011
RecallModeradoOutroUK

Engate desprendeu-se do engate de reboque

A combinação de forças internas e externas fez com que a esfera de engate se separasse prematuramente do alojamento da esfera de engate, resultando na separação do reboque da unidade tratora.

DVSA · Reino Unido11 de jul. de 2002R/2002/093Traduzido automaticamente · original: inglêsVer detalhes →
5 I · 1997–2009
RecallModeradoMotorJP

過給機

ターボチャージャ(過給機)の冷却水配管継手に不適切なものがあるため、そのままの状 態で使用を続けると、タービンシャフトの冷却が不足し、最悪の場合、オイルシールが破 損して潤滑油が排気管に流出するおそれがある。

MLIT · Japão4 de jul. de 20001208172Anos-modelo 1997–2000Exibido no japonês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallModeradoMotorJP

ブローバイ装置

原動機のブローバイガス還元装置において、PCVバルブ(ブローバイガス流量を調整す るバルブ)の材質が不適切なため、そのままの状態で使用を続けると、当該バルブが作動 しなくなり、ブローバイガス還元装置が機能しなくなるおそれがある。

MLIT · Japão4 de jul. de 20001208171Anos-modelo 1997–2000Exibido no japonês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallModeradoElétricaJP

その他(電気装置)

原動機室内のスタータモータの電気配線コネクタに防水シールが取り付けられていないも のがあるため、そのままの状態で使用を続けると、当該コネクタ部に水分が混入し、最悪 の場合、コネクタピンが腐食して導通不良となり、原動機が始動できなくなるおそれがあ る。

MLIT · Japão4 de jul. de 20001208160Anos-modelo 1999Exibido no japonês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallModeradoFreiosJP

A/T

エンジンルーム内の自動変速機を制御するための電気配線において、当該電気配線の取 り回しが不適切なため、ABS機器のブラケットと接触するものがあり、そのままの状態 で使用を続けると、当該電気配線の被覆が損傷し、最悪の場合、自動変速機が適切に作動 しないおそれがある。

MLIT · Japão20 de jan. de 20002201430Anos-modelo 1998Exibido no japonês original · tradução pendenteVer detalhes →
5 I · 1997–2009
RecallModeradoMotorJP

その他(エンジン)

原動機において、燃料噴射量等を制御するコンピュータのプログラムが不適切なため、そ のままの状態で使用を続けると、最悪の場合、当該原動機の停止、または、始動が困難に なるおそれがある。

MLIT · Japão17 de ago. de 19991207520Anos-modelo 1997–1999Exibido no japonês original · tradução pendenteVer detalhes →
Mais antigos →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).