Due to improper design, the lead wires in the driver and passenger side door harness could be damaged or cut by the repeated motion of opening and closing the doors. This may cause the curtain and side airbags to not deploy correctly in the event of an accident, increasing the risk of injury.
Safety Gate · UE28 de jun. de 2021A12/00955/21Anos-modelo 2020Exibido no inglês original · tradução pendenteVer detalhes →
Steering assistance may be lost because the power steering tensioner pulley material is not to specification. The pulley may fail and cause a loss of drive to the hydraulic pump.
DVSA · Reino Unido26 de jul. de 2010R/2010/067Exibido no inglês original · tradução pendenteVer detalhes →
Le matériau résineux de la pompe à carburant n’est pas assez dense, peut se déformer et entrer en contact avec le boîtier de la pompe. cela peut entraîner la défaillance de la pompe, ce qui peut entraîner le blocage du moteur et augmenter le risque d’accidents et de blessures.
Safety Gate · UE · RappelConso · França27 de fev. de 2026a12/00885/24Anos-modelo 2018–2019Exibido no francês original · tradução pendenteVer detalhes →
The resinous material of the fuel pump is not dense enough, can deform and come into contact with the pump housing. This can cause the pump to fail, potentially resulting in the engine stalling and increasing the risk of accidents and injuries.
Safety Gate · UE11 de abr. de 2024A12/00885/24Anos-modelo 2018–2019Exibido no inglês original · tradução pendenteVer detalhes →
Em alguns casos, o lábio do retentor de óleo do eixo da alavanca de seleção manual da transmissão automática está invertido, devido ao uso de ferramenta inadequada na montagem do eixo. Como resultado, pode ocorrer vazamento de óleo nessa região e, no pior dos casos, o veículo pode ficar impossibilitado de rodar.
MLIT · Japão9 de set. de 20211150110Anos-modelo 2021Traduzido automaticamente · original: japonêsVer detalhes →
The fuel feeding impeller in the fuel pump, which is made of resin material, may be swollen and deformed due to the insufficient material density caused by the improper injection molding process. Consequently, the impeller may interfere with the fuel pump housing, resulting in the fuel pump malfunction. As a result, the engine could stop while driving, increasing the risk of an accident.
Safety Gate · UE28 de jun. de 2021A12/00956/21Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
Como o processo de julgamento de aprovação/reprovação na inspeção de conclusão não era claro, por exemplo com inspetores não nomeados (auxiliares de inspeção) realizando o julgamento de aprovação/reprovação, existia a possibilidade de que as inspeções relativas às normas de segurança para veículos rodoviários não tivessem sido realizadas adequadamente.
MLIT · Japão18 de abr. de 20191144870Anos-modelo 2015–2019Traduzido automaticamente · original: japonêsVer detalhes →
The brake servo booster may not have been correctly manufactured. This may cause a harder feel to the brake pedal operation and require more effort from the driver.
DVSA · Reino Unido28 de out. de 2016R/2016/211Anos-modelo 2014Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).