Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Toyota 4Runner

1981– · 7 gerações · 42 defeitos documentados · 5 mercados
Gerações

Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.

Ano do modelo
4Runner IV · 2002–2009
BoletimCríticoMotorNA

Boletim

Carta ao Concessionário: 23 de março de 2018. A seção de Pedidos de Peças foi atualizada. A Toyota iniciará uma Campanha Especial de Serviço (SSC) para substituir o amortecedor de pulsação de combustível em determinados veículos Toyota 4Runner V6 do Ano Modelo (MY) 2003. Em alguns veículos 4Runner V6 do início do Ano Modelo 2003, o amortecedor de pulsação de combustível, localizado no trilho de combustível, pode ter sido montado incorretamente. Se o amortecedor de pulsação falhar, uma pequena quantidade de combustível pode vazar. No pior dos casos, isso pode resultar em incêndio no compartimento do motor, caso haja uma fonte de calor ou de ignição presente.

NHTSA · boletim do fabricante10152124Anos-modelo 2003Traduzido automaticamente · original: inglêsVer detalhes →
4Runner IV · 2002–2009
BoletimCríticoMotorNA

Boletim

The fuel pulsation damper, located on the fuel rail, may have been improperly assembled. If the puslation damper fails, a small amount of fuel may leak. This may result in an engine compartment fire. Toyota initiated special service campaign 30c to replace the fuel pulsation damper. *tt

NHTSA · boletim do fabricante10001579Anos-modelo 2003Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoInteriorNA

Boletim

2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers.

NHTSA · boletim do fabricante11034826Anos-modelo 2026Traduzido automaticamente · original: inglêsVer detalhes →
4Runner VI · 2024–
BoletimModeradoSuspensãoNA

Boletim

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota Warranty Policy. GTS+ Health Check Completed PDS Check Sheet Battery Charge Test Print Out GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 7 of Final Inspection and Cleaning.) This bulletin contains the PDS procedures that apply specifically to 2026 model year 4Runner and 4Runner Hybrid vehicles

NHTSA · boletim do fabricante11032475Anos-modelo 2026Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoSuspensãoNA

Boletim

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota Warranty Policy. GTS+ Health Check Completed PDS Check Sheet Battery Charge Test Print Out GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2026 model year 4Runner and 4Runner Hybrid vehicles. Refer to T-SB-0023-25, the universal Check Sheet that contains PDS steps that apply to all 2026 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, refer to T-SB-0009-25, Long-Term Vehicle Storage Guidelines.

NHTSA · boletim do fabricante11026310Anos-modelo 2026Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoCarroceriaNA

Boletim

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of Final Inspection and Cleaning.) This bulletin contains the PDS procedures that apply specifically to 2025 model year 4Runner Hybrid vehicles. Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet.

NHTSA · boletim do fabricante11024100Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoCarroceriaNA

Boletim

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of Final Inspection and Cleaning.) This bulletin contains the PDS procedures that apply specifically to 2025 model year 4Runner vehicles. Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet.

NHTSA · boletim do fabricante11024091Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoFreiosNA

Boletim

Some 2024 2025 model year Land Cruiser, and 2025 model year 4Runner and 4Runner Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving in reverse.

NHTSA · boletim do fabricante11024073Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoFreiosNA

Boletim

Some 2024 2025 model year Land Cruiser, and 2025 model year 4Runner and 4Runner Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving in reverse.

NHTSA · boletim do fabricante11021727Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoOutroNA

Boletim

The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.

NHTSA · boletim do fabricante11020657Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoInteriorNA

Boletim

2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.

NHTSA · boletim do fabricante11020645Anos-modelo 2026Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoCarroceriaNA

Boletim

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of Final Inspection and Cleaning.) This bulletin contains the PDS procedures that apply specifically to 2025 model year 4Runner Hybrid vehicles. Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet.

NHTSA · boletim do fabricante11016791Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoElétricaNA

Boletim

Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.

NHTSA · boletim do fabricante11016782Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoCarroceriaNA

Boletim

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of Final Inspection and Cleaning.) This bulletin contains the PDS procedures that apply specifically to 2025 model year 4Runner Hybrid vehicles. Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet.

NHTSA · boletim do fabricante11015505Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoElétricaNA

Boletim

Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.

NHTSA · boletim do fabricante11015496Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoElétricaNA

Boletim

Some 2021 2025 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU.

NHTSA · boletim do fabricante11014209Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoInteriorNA

Boletim

2026 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers.

NHTSA · boletim do fabricante11014187Anos-modelo 2026Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoCarroceriaNA

Boletim

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of Final Inspection and Cleaning.) This bulletin contains the PDS procedures that apply specifically to 2025 model year 4Runner vehicles. Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, refer to T-SB-0023-24, Long-Term Vehicle Storage Guidelines

NHTSA · boletim do fabricante11012765Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoInteriorNA

Boletim

2025 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.

NHTSA · boletim do fabricante11012745Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoFreiosNA

Boletim

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

NHTSA · boletim do fabricante11012743Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoFreiosNA

Boletim

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

NHTSA · boletim do fabricante11007444Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoFreiosNA

Boletim

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

NHTSA · boletim do fabricante11006150Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoInteriorNA

Boletim

2025 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.

NHTSA · boletim do fabricante11005112Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner VI · 2024–
BoletimModeradoInteriorNA

Boletim

2025 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.

NHTSA · boletim do fabricante11005054Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
4Runner V · 2009–2024
BoletimModeradoInteriorNA

Boletim

TSB: 2024 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.

NHTSA · boletim do fabricante10252249Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
Mais antigos →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).