Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Toyota Sequoia

2000– · 3 gerações · 22 defeitos documentados · 3 mercados
Gerações
Ano do modelo
Sequoia II · 2007–2022
RecallCríticoElétricaNA

Elétrica

**Problema:** Este recall refere-se a determinados kits de aquecedor do bloco do motor instalados em determinados veículos ou vendidos como acessórios nas concessionárias Toyota ou Lexus. Em alguns veículos, o cabo do aquecedor do bloco do motor pode não ter proteção térmica suficiente e ser danificado por altas temperaturas. Se isso acontecer, o cabo pode sofrer um curto-circuito enquanto estiver conectado à tomada, fazendo com que a fiação superaqueça ou derreta. **Nota:** Este recall afeta apenas os seguintes números de peça do aquecedor/cabo de alimentação: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 **Risco à segurança:** A fiação do aquecedor do bloco do motor que superaquece ou derrete pode criar o risco de incêndio. **Ações corretivas:** A Toyota recomenda que você pare de usar o aquecedor do bloco do motor imediatamente. A Toyota notificará os proprietários por correspondência e instruirá a levar o veículo a uma concessionária para desativar o aquecedor do bloco do motor. Para alguns veículos, as ações corretivas para este recall ainda estão em desenvolvimento. Para outros, não é possível instalar um novo aquecedor do bloco do motor, e o proprietário receberá o reembolso do preço de compra do aquecedor do bloco do motor.

Transport Canada24 de nov. de 20212021723Anos-modelo 2008–2019Traduzido automaticamente · original: inglêsVer detalhes →
Sequoia I · 2000–2007
RecallCríticoInteriorNA

Airbag

Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator or airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional Note: Vehicles may have had the original front passenger airbag inflator replaced as a "like-for-like" replacement under recall 2016-103 (Toyota Recall #'s SRC 241 & SRC 242) as a temporary remedy while evaluating a permanent remedy. These vehicles will receive the permanent remedy passenger airbag assembly under this recall.

Transport Canada17 de out. de 20192019523Anos-modelo 2002–2007Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia I · 2000–2007
RecallCríticoInteriorNA

Air bags:Frontal:Passenger side:Inflator module

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

NHTSA · Estados Unidos17 de out. de 201919V741000Anos-modelo 2002–2007Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia I · 2000–2007
RecallCríticoInteriorNA

Airbag

Em determinados veículos, a exposição prolongada a alta umidade absoluta e temperatura, combinada com ciclos frequentes de variação de temperatura, pode eventualmente degradar o propelente contido no airbag frontal do passageiro. Isso pode fazer com que o airbag seja acionado com mais força do que o normal. Como resultado, se o veículo se envolver em uma colisão que exija o acionamento do airbag, fragmentos podem ser projetados em direção aos ocupantes do veículo, e o conjunto do airbag pode ser danificado, impedindo o funcionamento adequado. Esses problemas podem aumentar o risco de lesões. Correção: As concessionárias substituirão o inflador ou o conjunto do airbag frontal do passageiro. <br><br> Nota: O clima canadense faz com que o propelente se degrade lentamente. O recall está sendo realizado como medida preventiva para eliminar riscos futuros, e espera-se substituir os infladores dos airbags antes que sua função seja afetada. Alguns veículos podem ter tido o inflador original do airbag frontal do passageiro substituído por um componente de "mesmo tipo" (like-for-like) no âmbito do recall 2013-133 (Toyota Recall #'s SSC 193/241 & SSC 194/242), como solução temporária enquanto se avalia uma solução definitiva. Esses veículos receberão, neste recall, o conjunto de airbag do passageiro como solução definitiva.

Transport Canada12 de dez. de 20182018699Anos-modelo 2002–2003Traduzido automaticamente · original: inglêsVer detalhes →
Sequoia I · 2000–2007
RecallCríticoInteriorNA

Air bags:Frontal:Passenger side:Inflator module

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2002-2005 Lexus SC and Toyota Sequoia, 2003-2005 Toyota Corolla and Tundra, and 2003-2007 Pontiac Vibe vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation.

NHTSA · Estados Unidos12 de dez. de 201818V883000Anos-modelo 2002–2005Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia II · 2007–2022
RecallCríticoInteriorNA

Airbag

Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection in Frontal Impacts and CMVSS 214 - Side Impact Protection. The airbag (SRS) control unit may incorrectly detect a fault in one or more of the front or side airbag impact sensors during vehicle start up. In the event of a crash where airbag deployment is required, this may result in the airbags not deploying as designed, increasing the risk of injury. Upon detection of a fault in the airbag system, multiple warning lights would activate, a warning buzzer would sound, and a warning message would display on the instrument panel display. Correction: Dealers will update the airbag control unit software. Note: This recall supersedes recall 2018-100. Vehicles repaired as part of the previous recall will require re-inspection and repair.

Transport Canada5 de out. de 20182018547Anos-modelo 2018–2019Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia II · 2007–2022
RecallCríticoElétricaNA

Electrical system:Software

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2019 Toyota Tundra and Sequoia vehicles and 2019 Toyota Avalon and Avalon Hybrid vehicles. The air bag electronic control unit (ECU) may erroneously detect a fault during the vehicle start-up self check. If this occurs, the ECU may not deploy the airbags as intended, in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection," and 214, "Side Impact Protection."

NHTSA · Estados Unidos4 de out. de 201818V685000Anos-modelo 2018–2019Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia II · 2007–2022
RecallCríticoElétricaNA

Electrical

Certain vehicles may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 126 - Electronic Stability Control Systems. Electrical noise could be introduced into the YAW rate sensor within the airbag ECU, which could result in deactivation of the Vehicle Stability Control and Pre-Collision systems and limited function of the Trailer Brake Controller system. This would be contrary to the requirements of the standard, and could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will update the software of the ECU. Note: This recall is superseded by recall 2018547. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018547">recall 2018547</a> for more information.

Transport Canada21 de fev. de 20182018100Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia II · 2007–2022
RecallCríticoElétricaNA

Elétrica

Em determinados veículos, os cabos de alimentação elétrica de alguns aquecedores de bloco instalados pela concessionária podem ter sido fabricados de forma inadequada, fazendo com que os fios entrem em contato entre si e resultem em curto-circuito. Um curto-circuito pode provocar incêndio, o que aumentaria o risco de lesões e/ou danos à propriedade. Correção: Para os veículos em que o aquecedor de bloco em questão foi aprovado para instalação, a concessionária substituirá o conjunto do aquecedor de bloco por um novo, de projeto aprimorado. Para os veículos em que o aquecedor de bloco em questão não foi aprovado para instalação, as concessionárias removerão o conjunto do aquecedor de bloco. Até que a correção possa ser realizada, as concessionárias cortarão a extremidade do plugue do cabo do aquecedor de bloco para desativar o funcionamento do aquecedor.

Transport Canada20 de jul. de 20172017363Anos-modelo 2016–2017Traduzido automaticamente · original: inglêsVer detalhes →
Sequoia II · 2007–2022
RecallCríticoSuspensãoNA

Wheels:Lugs/nuts/bolts/studs

Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2013-2017 Toyota Tundra and Sequoia vehicles accessorized with Southeast Toyota accessory 20-inch Rockstar wheels installed by Southeast Toyota or a Southeast Toyota dealer. The Rockstar wheels were installed with lugnuts that may crack and detach.

NHTSA · Estados Unidos11 de mai. de 201717V311000Anos-modelo 2013–2017Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia I · 2000–2007
RecallCríticoInteriorUK

Airbags de cortina e pré-tensores dos cintos de segurança podem acionar incorretamente

Devido à programação inadequada do sistema de airbags no Airbag Sensor Assembly (módulo de controle do airbag), existe a possibilidade de que o Airbag Sensor Assembly detecte erroneamente um capotamento e acione os Curtain Shield Airbags (CSA) e os pré-tensionadores dos cintos de segurança. O acionamento dos CSA pode causar lesões leves a um ocupante do veículo.

DVSA · Reino Unido31 de out. de 2016R/2016/012Anos-modelo 2004–2006Traduzido automaticamente · original: inglêsVer detalhes →
Sequoia I · 2000–2007Sequoia II · 2007–2022
RecallCríticoInteriorNA

Bancos:Conjunto dianteiro:Aquecedor/resfriador do banco

Southeast Toyota Distributors, LLC (SET) está fazendo o recall de determinados veículos 4Runner de 2005 a 2011, Highlander, Sequoia e Sienna de 2005 a 2011, Avalon e Tundra de 2005 a 2010, Camry Solara de 2006 a 2008, Highlander híbrido de 2006 a 2010, Rav4 e Tacoma de 2006 a 2011, FJ Cruiser de 2007 a 2010, Camry híbrido de 2007 a 2011, Venza de 2009 a 2010, Prius de 2010 a 2012, Camry de 1988 a 1990 e de 2005 a 2010, e Corolla de 1989 e de 2009 a 2010, equipados com aquecedores de assento acessórios do mercado de reposição, com elemento aquecedor de fios de cobre. A fiação elétrica dos aquecedores de assento pode ser danificada quando o estofado do assento é comprimido.

NHTSA · Estados Unidos2 de jun. de 201616V396000Anos-modelo 2005–2011Traduzido automaticamente · original: inglêsVer detalhes →
Sequoia I · 2000–2007
RecallCríticoInteriorNA

Airbag

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes recalls 2013113, 2014224, 2015197 and 2015269. Correction: All vehicles having not received a replacement inflator as part of the previous recall will now have a replacement inflator installed by dealers. For Matrix model vehicles, dealers may replace the front passenger airbag assembly with one equipped with a newly specified inflator.

Transport Canada2 de mar. de 20162016103Anos-modelo 2002–2007Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia I · 2000–2007
RecallCríticoInteriorNA

Airbag

On certain vehicles, the roll rate sensors in the airbag control module may improperly calibrate if the vehicle experiences a body roll motion approximately four seconds after the ignition is turned to the 'ON' position. If the vehicle experiences another subsequent body roll motion, the system may erroneously detect a rollover, causing both of the side curtain airbags to deploy and the seat belt pre-tensioners to be activated. Unintended airbag and/or seat belt pre-tensioner deployment, in a non-warranted (non-impact) situation, could result in injury and increase the risk of a vehicle crash causing injury and/or property damage. Correction: Dealers will replace the airbag control module with one which has improved programming. Note: The translation below is the Portuguese version of the text you provided. Em determinados veículos, os sensores de taxa de rolagem no módulo de controle do airbag podem ser calibrados incorretamente se o veículo sofrer um movimento de rolagem da carroceria aproximadamente quatro segundos após a chave de ignição ser colocada na posição 'ON'. Se o veículo sofrer outro movimento de rolagem subsequente, o sistema pode detectar erroneamente um capotamento, fazendo com que ambas as cortinas laterais de airbag sejam acionadas e os pré-tensionadores dos cintos de segurança sejam ativados. A implantação não intencional de airbags e/ou pré-tensionadores de cintos de segurança, em uma situação sem garantia (sem impacto), pode resultar em lesões e aumentar o risco de uma colisão de veículo causando lesões e/ou danos materiais. Correção: As concessionárias substituirão o módulo de controle do airbag por um que possua programação aprimorada.

Transport Canada2 de fev. de 20162016051Anos-modelo 2005–2006Traduzido automaticamente · original: inglêsVer detalhes →
Sequoia II · 2007–2022
RecallCríticoElétricaNA

Visibility:Power window devices and controls

Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.

NHTSA · Estados Unidos22 de out. de 201515V689000Anos-modelo 2009–2011Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia II · 2007–2022
RecallCríticoElétricaNA

Electrical

On certain vehicles, inconsistent application of grease during the manufacturing process could cause the driver's side power window master switch to stick or become inoperative due to electrical contact point wear. This could cause debris to accumulate between the contact points, potentially resulting in an electrical short circuit. If a short circuit occurs, the switch assembly may overheat, produce smoke, melt and/or potentially lead to a fire causing injury and/or property damage. Correction: Dealers will inspect the driver's power window master switch and apply a specialized grease that inhibits heat build-up, or replace the power window master switch circuit board, as necessary. Note: This is an expansion of recall 2012-338.

Transport Canada21 de out. de 20152015493Anos-modelo 2009–2011Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia I · 2000–2007
RecallCríticoInteriorNA

Airbag

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2016103">Click here for more information</a>

Transport Canada17 de jun. de 20152015269Anos-modelo 2002–2007Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia I · 2000–2007
RecallCríticoInteriorNA

Airbag

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2016103">Click here for more information</a>

Transport Canada13 de mai. de 20152015197Anos-modelo 2003–2004Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia I · 2000–2007
RecallCríticoInteriorNA

Airbags

Toyota Motor Engineering & Manufacturing (Toyota) notificou a agência em 13 de maio de 2015 que está fazendo o recall dos veículos Lexus SC 2005-2007, Toyota Corolla, Corolla Matrix, Sequoia e Pontiac Vibe, e dos veículos Toyota Tundra 2005-2006 que foram originalmente vendidos, ou que alguma vez foram registrados, na Flórida, ao longo da Costa do Golfo, em Porto Rico, no Havaí, nas Ilhas Virgens Americanas, em Guam, Saipan e Samoa Americana. Em 16 de junho de 2015, a Toyota ampliou o recall para abranger mais 769.055 veículos, incluindo determinados veículos Lexus SC do ano-modelo 2002-2004, Toyota Sequoia, Toyota Corolla Matrix 2003-2004, Toyota Corolla, Pontiac Vibe e Toyota Tundra, bem como os veículos abrangidos pela notificação de 13 de maio de 2015 nas partes da Geórgia, Alabama, Louisiana, Mississippi e Texas que não haviam sido incluídas anteriormente. Os inflators dos airbags do lado do passageiro dianteiro são suscetíveis a se romperem em caso de colisão que exija a ativação do airbag do passageiro dianteiro.

NHTSA · Estados Unidos13 de mai. de 201515V286000Anos-modelo 2002–2007Traduzido automaticamente · original: inglêsVer detalhes →
Sequoia I · 2000–2007
RecallCríticoInteriorNA

Airbags

Toyota Motor Engineering & Manufacturing (Toyota) notificou a agência em 13 de maio de 2015 que está recolhendo determinados veículos ano-modelo 2004 Sequoia fabricados entre 18 de agosto de 2003 e 19 de agosto de 2004, e veículos Tundra de 2003 a 2004 fabricados entre 18 de março de 2003 e 25 de agosto de 2004. Em 16 de junho de 2015, a Toyota ampliou o recall para incluir 1.270.468 veículos adicionais, incluindo Sequoia ano-modelo 2002 a 2003 e 2005 a 2007, Tundra 2005 a 2006, Corolla 2003 a 2007, Corolla Matrix 2003 a 2007, Pontiac Vibe 2003 a 2007 e veículos Lexus SC 2002 a 2007. O objetivo é corrigir um defeito de segurança no inflador do airbag frontal do lado do passageiro, que pode gerar pressão interna excessiva, fazendo com que o inflador se rompa quando o airbag for acionado. Este recall abrange tanto os airbags frontais do lado do passageiro instalados originalmente nos veículos quanto os airbags de reposição que possam ter sido instalados como peças de serviço. Um airbag de reposição pode ter sido instalado, por exemplo, se o veículo tiver sofrido uma colisão que exigiu a substituição do airbag frontal do lado do passageiro.

NHTSA · Estados Unidos13 de mai. de 201515V285000Anos-modelo 2002–2007Traduzido automaticamente · original: inglêsVer detalhes →
Sequoia I · 2000–2007Sequoia II · 2007–2022
RecallCríticoInteriorNA

Seats:Front assembly:Seat heater/cooler

Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion which may damage the seat heater wiring.

NHTSA · Estados Unidos19 de nov. de 201414V743000Anos-modelo 2005–2011Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia I · 2000–2007
RecallCríticoInteriorNA

Airbag

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2016103">Click here for more information</a>

Transport Canada12 de jun. de 20142014224Anos-modelo 2002–2003Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia I · 2000–2007
RecallCríticoInteriorNA

Airbag

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2016103">Click here for more information</a>

Transport Canada11 de abr. de 20132013113Anos-modelo 2002–2003Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia II · 2007–2022
RecallCríticoInteriorNA

Seats

Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed.

NHTSA · Estados Unidos16 de jan. de 201313V014000Anos-modelo 2010–2012Exibido no inglês original · tradução pendenteVer detalhes →
Sequoia II · 2007–2022
RecallCríticoOutroNA

Visibility:Power window devices and controls

Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.

NHTSA · Estados Unidos10 de out. de 201212V491000Anos-modelo 2008–2009Exibido no inglês original · tradução pendenteVer detalhes →
Mais antigos →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).