本档案收录Acura 1.7EL的已知缺陷,由社区撰写并注明出处。阅读免费;注册免费账户即可贡献。当足够多的可信贡献者验证后,缺陷将获得印章。
最严重的缺陷
此筛选条件下暂无已记录的缺陷。
召回严重内饰NA
问题:在某些车辆中,长期暴露于高绝对湿度和高温环境,加上高温循环,最终可能使气囊内的推进剂降解。这可能导致气囊以比平时更大的力量弹出。如果气囊充气器破裂,碎片可能会被弹射到车内乘员身上,或损坏安全气囊组件,从而影响其正常功能。注意:这是一项新的召回活动,涵盖了在之前召回中更换过安全气囊充气器或安装了替换气囊的车辆。上一次召回提供了临时(短期)维修。临时维修零件必须与本次召回提供的最终维修零件进行更换。安全风险:如果车辆发生需要安全气囊弹出的事故,安全气囊充气器可能会破裂,造成受伤风险。纠正措施:车主将收到邮件通知,并被指示将车辆送往经销商处更换驾驶员和/或副驾驶前部安全气囊充气器。注意:加拿大气候导致推进剂劣化缓慢。此次召回是作为预防措施,以应对未来风险。预计所有安全气囊充气器将在其功能受影响前更换。
召回严重内饰NA
Issue: On certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, pieces could be propelled toward the occupants. This could also cause damage to the airbag assembly and prevent it from inflating properly. Note: This recall only affects certain vehicles that had a Takata airbag inflator installed during a previous airbag recall or collision repair. Safety Risk: In a crash where the airbag deploys, there could be an increased risk of injury. Corrective Action: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the driver-front airbag inflator replaced.
召回严重内饰NA
On certain vehicles, the passenger frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace airbag inflator. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
通报中等内饰NA
Dealer message - On Monday, June 23, 2014, Acura announced three recalls for various 2002-06 Acura models. As of July 23, 2014, affected VINs have been identified, and service bulletins 14-023, Safety Recall: Front Passenger?s Airbag Inflator Can Be Over-Pressurized, 14-029, Recall: Front Driver?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity Recall, and 14-030, Recall: Front Passenger?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity have been posted to ISIS. However, due to the large number of affected units, Acura is still in the process of populating the VIN status inquiry function on iN, which is expected to take several days. When this process is complete, Acura will notify all dealers again via iN message. Until that time, the existing acknowledgement procedure must be used for all potentially affected vehicles.
通报轻微其他NA
Dealer message - On Monday, June 23, 2014, Acura announced three recalls for various 2002-06 Acura models. As of August 4, 2014, affected VINs have been identified, and VIN status inquiry has been updated.
通报中等变速箱NA
Acura: There are guidelines for various situations and procedures including: Tire pressure valve stem installation, trailer stability malfunction light is on, engine oil application guide, new software, new transmission fluid, notchy steering feeling. *rm
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。