机动车辆 - 车身(乘员防护装备)
驾驶员安全气囊中的燃气发生器可能会爆裂。
🔔 注册免费账户,接收 BMW 3系列 (E46) 的邮件提醒
驾驶员安全气囊中的燃气发生器可能会爆裂。
如果多年来暴露在高绝对湿度和高温度波动下,驾驶员的安全气囊燃气发生器可能会发生故障
驾驶员安全气囊的充气器可能因长期老化而故障。在这种情况下,如果安全气囊在事故中弹出,充气器内部压力可能过高。充气器可能会爆裂。金属碎片可能造成伤害。
受影响的车辆已包含在其曾经所在市场的安全召回范围内。这些车辆可能装有驾驶员和/或前排乘客安全气囊,如果安全气囊展开,可能会以过大的力量展开,导致锋利的金属碎片飞出,可能造成严重伤害,甚至可能致使附近的人死亡。
司机侧安全气囊中的推进剂可能会随时间推移而劣化。如果安全气囊展开,可能导致充气器的碎片伤及车内乘员。
For vehicles fitted with a Takata front passenger airbag with a PSPI inflator these vehicles have previously received a like for like replacement front passenger airbag via a previous safety recall campaign.
In het geval dat de passagiersairbag al was vervangen, kan de gasgenerator na enkele jaren alsnog defect raken als gevolg van schommelingen in vochtigheid en temperatuur.
Le propulsif dans l’airbag passager peut se détériorer en raison de fortes variations d’humidité et de température. en cas d’accident dans lequel le coussin gonflable se déploie, cela pourrait entraîner des fragments de l’enveloppe du gonfleur qui se détachent et blessent les occupants du véhicule.
Issue: This recall applies to vehicles that may be equipped with a replacement sport or M-sport steering wheel that has a Takata airbag. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the driver-front airbag module. To learn if your vehicle is affected by this recall, owners may: • Visit <a href= https://www.bmw.ca/en/ssl/VehicleRecall.html> https://www.bmw.ca/en/ssl/VehicleRecall.html</a> • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002
BMW of North America, LLC (BMW) is recalling certain 2006-2011 3 Series Sedan (324i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi), 2006-2012 3 Series Sportswagon (325xi, 328i, 328xi), and 2009-2011 3 Series Sedan (335d) vehicles. The original steering wheel may have been replaced with a sport or M-sport steering wheel equipped with an inflator that can explode during deployment.
The propellant within the integrated inflator of driver airbags can deteriorate during time. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants.
乘客安全气囊中的推进剂因湿度和温度变化大而可能劣化。如果发生事故,气囊弹出,充气器壳体碎片可能脱落,造成车内人员受伤。
블로우바이히터의 생산 품질 불량으로 플라스틱 코팅이 단락 열에 의해 녹아 매우 드문 경우 화재가 발생할 수 있는 가능성에 따른 리콜 (*다만 단락이 발생될 경우 엔진경고등(MIL)이 점등되며 이러한 경우, 냄새 또는 연기를 통해 운전자가 이 사실을 바르게 인지할 수 있음) <*대상차량별 생산일자> BMW 128i: 2008.09.25 BMW 128i: 2008.03.17~2008.07.11 BMW 128i: 2008.02.04~2009.06.23 BMW 128i: 2010.09.03~2012.03.02 BMW 128i: 2010.04.26 BMW 323i: 2009.04.17 BMW 323i: 2006.09.04 BMW 325i: 2004.12.15~2007.01.22 BMW 325i: 2005.05.04~2006.08.17 BMW 325i: 2005.09.15~2006.05.10 BMW 325xi: 2005.11.22~2006.05.23 BMW 325xi: 2005.07.14 BMW 328i: 2011.07.04~2012.11.12 BMW 328i: 2010.10.18~2011.03.14 BMW 328i: 2010.11.18~2012.08.28 BMW 328i: 2011.02.14~2011.09.23 BMW 328i: 2008.09.02~2009.04.30 BMW 328i: 2008.09.16~2008.10.22 BMW 328i: 2009.04.07~2011.07.25 BMW 328i: 2009.02.13~2009.05.21 BMW 328i: 2010.07.08~2011.10.14 BMW 328i: 2009.09.21~2010.10.05 BMW 328i: 2008.08.21~2008.11.13 BMW 328i: 2009.02.16 BMW 328i: 2009.09.24~2011.07.25 BMW 328i: 2009.10.07~2010.09.27 BMW 328i: 2006.08.24~2008.02.20 BMW 328i: 2006.09.02~2008.07.29 BMW 328i: 2006.10.30~2008.06.13 BMW 328i: 2006.09.11~2008.04.03 BMW 328i: 2008.07.02 BMW 328i: 2006.06.26~2009.01.20 BMW 328i: 2007.05.30~2009.07.29 BMW 328i: 2007.03.24~2009.04.27BMW 328i: 2009.10.08~2009.12.01 BMW 328i: 2006.11.15~2009.07.24 BMW 328i: 2009.11.03 BMW 328i Convertible: 2009.12.08~2013.07.24 BMW 328i Convertible: 2006.12.12~2010.01.20 BMW 328i xDrive: 2010.06.18 BMW 328xi: 2009.07.24 BMW 328xi: 2009.09.08~2010.10.08 BMW 328xi: 2011.10.06~2011.12.05 BMW 328xi: 2008.10.31~2009.07.24 BMW 328xi: 2009.10.16~2011.08.02 BMW 328xi: 2008.10.15 BMW 328xi: 2006.10.11~2007.12.12 BMW 328xi: 2006.09.11~2007.09.24 BMW 328xi: 2006.10.23~2009.01.22 BMW 328xi: 2006.09.28~2009.01.28 BMW 328xi: 2009.09.14 BMW 330i: 2004.11.24~2006.07.06 BMW 330i: 2005.03.04~2006.06.14BMW 330xi: 2005.10.26~2006.06.02 BMW 523i: 2005.02.18~2007.02.23 BMW 525i: 2005.03.18~2006.10.04 BMW 525i: 2005.03.07~2006.12.07 BMW 525xi: 2005.07.28~2006.06.26 BMW 528i: 2007.02.21~2009.12.17 BMW 528i: 2007.03.26~2009.01.29 BMW 528i: 2009.07.01~2009.11.26 BMW 528xi: 2007.04.23~2008.11.24 BMW 528xi: 2009.04.14~2009.11.09 BMW 530i: 2005.03.17~2006.12.20 BMW 530i: 2005.03.14~2007.02.22 BMW 530i: 2005.06.17~2006.11.02 BMW 530i: 2007.02.21~2009.09.23 BMW 530xi: 2006.03.08~2006.12.20 BMW 530xi: 2005.07.06 BMW 730i: 2005.03.11~2006.09.21 BMW 730Li: 2005.03.11~2007.03.05 BMW X3 3.0i: 2006.09.05~2007.03.27 BMW X3 3.0i: 2007.07.16~2007.09.07 BMW X3 3.0si: 2007.01.23~2007.04.16 BMW X3 3.0si: 2006.08.29~2009.03.02 BMW X3 3.0si: 2009.09.01~2010.01.13 BMW X5 3.0si: 2007.03.23~2010.02.23 BMW X5 3.0si: 2007.02.10~2009.07.22 BMW X5 3.0si: 2009.12.03~2010.01.21 BMW X5 xDrive30i: 2007.02.02~2008.08.04 BMW X5 xDrive30i: 2009.10.12 BMW xDrive30: 2006.10.11~2009.06.02 BMW xDrive30: 2009.10.01~2009.11.30 BMW Z4 3.0i: 2006.03.01~2008.07.16 BMW Z4 3.0si: 2006.01.11~2007.06.14 BMW Z4 3.0si: 2006.03.10~2006.09.19 BMW Z4 3.0si: 2006.07.25~2008.03.14 BMW Z4 3.0si Coupe: 2006.07.05~2007.06.28 BMW Z4 sDrive: 2010.09.17~2011.06.07 BMW Z4 sDrive30i: 2009.04.22~2011.07.29 ?
助手席エアバッグのインフレーター(膨張装置)について、長期間にわたり、著しく高温多湿な環境下にさらされると、当該インフレーターに水分が浸入する可能性があり、結果として、エアバッグ展開時にインフレーター内圧が異常上昇し、インフレーター容器が破損して飛び散り、乗員が負傷するおそれがある。
ブローバイヒーターのプラスチック製造が不適切なため正温度特性(PTC)ヒーターエレメントへの絶縁体に不規則性が生じ、時間の経過とともに正温度特性(PTC)ヒーターエレメントがショートする可能性があるが、ヒューズによって確実に保護されない。そのため、正温度特性(PTC)ヒーターエレメントが異常発熱して外装が溶け、エンジン警告灯が点灯し最悪の場合、火災に至るおそれがある。
Issue: On certain vehicles equipped with an N52 or N52K 6-cylinder engine, a manufacturing problem could cause the PCV valve heater (blow-by heater) to short circuit and overheat. Note: This replaces Transport Canada recalls 2017-470 and 2019-170. Only vehicles equipped with an N52 or N52K engine require this repair. Safety Risk: An overheated engine PCV valve heater could create the risk of a fire, even while the vehicle is parked and turned off. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to install a wire harness repair kit. BMW recommends that you should park your vehicle outdoors until the recall repairs have been completed.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 1 Series Coupe (128i); 2007-2013 3 Series Coupe (328i, 328xi, 328i xDrive); 2007-2010 X3 SAV (X3 3.0si, X3 xDrive30i); 2008-2013 1 Series Convertible (128i); 2006-2011 3 Series Sedan (325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi); 2006-2012 3 Series Wagon (328i, 328i xDrive); 2007-2013 3 Series Convertible (328i); 2006-2010 5 Series Sedan (525i, 525xi, 528i, 528xi, 530i, 530xi); 2006-2007 5 Series Wagon (530xi); 2007-2010 X5 SAV (X5 3.0si, X5 xDrive30i); 2006-2008 Z4 Coupe (Z4 3.0si); and 2006-2011 Z4 Roadster (Z4 3.0i, Z4 3.0si, Z4 sDrive30i) vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
運転者席用エアバッグのインフレータ(膨張装置)において、吸湿防止が不適切なため、ガス発生剤が吸湿する可能性がある。そのため、使用過程でガス発生剤が吸湿や乾燥を繰返した場合など、衝突時等のエアバッグ作動時に正常に展開しないおそれがあり、インフレータ内の圧力が上昇して容器が破損することにより、乗員が負傷するおそれがある。
Issue: This recall is for vehicles that had an inspection performed under recall 2019-599, 2019-600 or 2019-601, but where the airbag inflator was not replaced. This new recall will provide replacement of the airbag inflator. On certain cars, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: BMW will notify owners by mail and instruct you to take your car to a dealer to replace the driver-front airbag inflator.
BMW of North America, LLC (BMW) is recalling certain 2000-2001 BMW 3 Series (323Ci, 325Ci, 328Ci and 330Ci), 1999-2001 323i, 328i, 330i, 330xi, and 2000 323i, 328i stationwagon vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles are equipped with driver-side air bag inflators that were previously inspected, but not replaced under recall numbers 19V-851, 19V852, or 19V-853. Due to a manufacturing issue, the NADI inflator may absorb moisture, causing the inflator to explode or the air bag cushion to underinflate.
助手席用エアバッグのインフレータ(膨張装置)について、長期間にわたり、著しく高温多湿な環境下にさらされると、当該インフレータに水分が浸入する可能性があり、結果として、エアバッグ展開時にインフレータ内圧が異常上昇し、インフレータ容器が破損して飛び散り、乗員が負傷するおそれがある。
運転者席用エアバッグのインフレータ(膨張装置)において、吸湿防止が不適切なため、ガス発生剤が吸湿する可能性がある。そのため、使用過程でガス発生剤が吸湿や乾燥を繰返した場合など、衝突時等のエアバッグ作動時に正常に展開しないおそれがあり、インフレータ内の圧力が上昇して容器が破損することにより、乗員が負傷するおそれがある。
Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag module. The passenger-front airbag module will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
BMW of North America, LLC (BMW) is recalling certain 2000-2005 323iT, 325iT, 325xiT, 320i, 323i, 325i, 325xi, 328i, 330i and 330xi and 2000-2006 323Ci, 325Ci, 328Ci, 330Ci, M3 Coupe, 323Cic, 325Cic, 330Cic, and M3 Convertible vehicles equipped with non-desiccated frontal Takata PSAN inflators and PSPI passenger frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。