Brake light switch (US safety investigation)
NHTSA, the US road safety agency, opened an engineering analysis (EA89007) into this problem on 23 December 1988 for 1985 models; it was closed on 26 July 1989 without a recall.
本档案收录BMW 6系列的已知缺陷,由社区撰写并注明出处。阅读免费;注册免费账户即可贡献。当足够多的可信贡献者验证后,缺陷将获得印章。
NHTSA, the US road safety agency, opened an engineering analysis (EA89007) into this problem on 23 December 1988 for 1985 models; it was closed on 26 July 1989 without a recall.
NHTSA, the US road safety agency, opened an engineering analysis (EA90002) into this problem on 12 October 1989 for 1985–1987 models; it was closed on 30 October 1990 without a recall.
NHTSA, the US road safety agency, opened a preliminary evaluation (PE88086) into this problem on 2 August 1988 for 1985 models; it was closed on 23 December 1988 without a recall.
US Specs is recalling one 2002 Porsche Carrera, one 1997 BMW 750IL, and two 1986 BMW 635 CSI vehicles for failing to conform to Federal Motor Vehicle Safety Standard No. 111, "Rearview Mirrors." While performing conformity-related modifications for the US market, labels with an incorrect size font were applied to the passenger side mirror.
On certain 325E, 325ES, 528E, 535I, 635CSI and 735I vehicles, the center high mounted brake light could add sufficient electrical load to cause the brake light switch to overheat, eventually leading to melting of the plastic internal switch parts. This could cause the switch plunger to jam in the ON or OFF position. This would render the brake light permanently ON or OFF regardless of brake pedal operation. Correction: A brake light switch with an increased current load capacity will be installed on affected vehicles.
Brake light switch could overheat, eventually leading to melting of plastic internal parts in area of electrical contacts.
The basic conditions for initializing the power windows are not met.
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)。