블로우바이히터의 생산 품질 불량으로 플라스틱 코팅이 단락 열에 의해 녹아 매우 드문 경우 화재가 발생할 수 있는 가능성에 따른 리콜 (*다만 단락이 발생될 경우 엔진경고등(MIL)이 점등되며 이러한 경우, 냄새 또는 연기를 통해 운전자가 이 사실을 바르게 인지할 수 있음)
<*대상차량별 생산일자> BMW 128i: 2008.09.25 BMW 128i: 2008.03.17~2008.07.11 BMW 128i: 2008.02.04~2009.06.23 BMW 128i: 2010.09.03~2012.03.02 BMW 128i: 2010.04.26 BMW 323i: 2009.04.17 BMW 323i: 2006.09.04 BMW 325i: 2004.12.15~2007.01.22 BMW 325i: 2005.05.04~2006.08.17 BMW 325i: 2005.09.15~2006.05.10 BMW 325xi: 2005.11.22~2006.05.23 BMW 325xi: 2005.07.14 BMW 328i: 2011.07.04~2012.11.12 BMW 328i: 2010.10.18~2011.03.14 BMW 328i: 2010.11.18~2012.08.28 BMW 328i: 2011.02.14~2011.09.23 BMW 328i: 2008.09.02~2009.04.30 BMW 328i: 2008.09.16~2008.10.22 BMW 328i: 2009.04.07~2011.07.25 BMW 328i: 2009.02.13~2009.05.21 BMW 328i: 2010.07.08~2011.10.14 BMW 328i: 2009.09.21~2010.10.05 BMW 328i: 2008.08.21~2008.11.13 BMW 328i: 2009.02.16 BMW 328i: 2009.09.24~2011.07.25 BMW 328i: 2009.10.07~2010.09.27 BMW 328i: 2006.08.24~2008.02.20 BMW 328i: 2006.09.02~2008.07.29 BMW 328i: 2006.10.30~2008.06.13 BMW 328i: 2006.09.11~2008.04.03 BMW 328i: 2008.07.02 BMW 328i: 2006.06.26~2009.01.20 BMW 328i: 2007.05.30~2009.07.29 BMW 328i: 2007.03.24~2009.04.27BMW 328i: 2009.10.08~2009.12.01 BMW 328i: 2006.11.15~2009.07.24
BMW 328i: 2009.11.03
BMW 328i Convertible: 2009.12.08~2013.07.24
BMW 328i Convertible: 2006.12.12~2010.01.20
BMW 328i xDrive: 2010.06.18
BMW 328xi: 2009.07.24
BMW 328xi: 2009.09.08~2010.10.08
BMW 328xi: 2011.10.06~2011.12.05
BMW 328xi: 2008.10.31~2009.07.24
BMW 328xi: 2009.10.16~2011.08.02 BMW 328xi: 2008.10.15 BMW 328xi: 2006.10.11~2007.12.12 BMW 328xi: 2006.09.11~2007.09.24 BMW 328xi: 2006.10.23~2009.01.22 BMW 328xi: 2006.09.28~2009.01.28 BMW 328xi: 2009.09.14 BMW 330i: 2004.11.24~2006.07.06 BMW 330i: 2005.03.04~2006.06.14BMW 330xi: 2005.10.26~2006.06.02 BMW 523i: 2005.02.18~2007.02.23
BMW 525i: 2005.03.18~2006.10.04
BMW 525i: 2005.03.07~2006.12.07
BMW 525xi: 2005.07.28~2006.06.26
BMW 528i: 2007.02.21~2009.12.17
BMW 528i: 2007.03.26~2009.01.29
BMW 528i: 2009.07.01~2009.11.26
BMW 528xi: 2007.04.23~2008.11.24
BMW 528xi: 2009.04.14~2009.11.09
BMW 530i: 2005.03.17~2006.12.20
BMW 530i: 2005.03.14~2007.02.22
BMW 530i: 2005.06.17~2006.11.02
BMW 530i: 2007.02.21~2009.09.23
BMW 530xi: 2006.03.08~2006.12.20
BMW 530xi: 2005.07.06
BMW 730i: 2005.03.11~2006.09.21
BMW 730Li: 2005.03.11~2007.03.05
BMW X3 3.0i: 2006.09.05~2007.03.27
BMW X3 3.0i: 2007.07.16~2007.09.07
BMW X3 3.0si: 2007.01.23~2007.04.16
BMW X3 3.0si: 2006.08.29~2009.03.02
BMW X3 3.0si: 2009.09.01~2010.01.13
BMW X5 3.0si: 2007.03.23~2010.02.23
BMW X5 3.0si: 2007.02.10~2009.07.22
BMW X5 3.0si: 2009.12.03~2010.01.21
BMW X5 xDrive30i: 2007.02.02~2008.08.04
BMW X5 xDrive30i: 2009.10.12
BMW xDrive30: 2006.10.11~2009.06.02
BMW xDrive30: 2009.10.01~2009.11.30
BMW Z4 3.0i: 2006.03.01~2008.07.16
BMW Z4 3.0si: 2006.01.11~2007.06.14
BMW Z4 3.0si: 2006.03.10~2006.09.19
BMW Z4 3.0si: 2006.07.25~2008.03.14
BMW Z4 3.0si Coupe: 2006.07.05~2007.06.28
BMW Z4 sDrive: 2010.09.17~2011.06.07
BMW Z4 sDrive30i: 2009.04.22~2011.07.29 ?
On certain passenger vehicles, the engine auxiliary/cooling fan operation, including variable speed, is electronically controlled. Failure of the fan motor can cause the electrical circuitry of the fan control unit to overload and fail, causing the fan to stop operating.
Vehicle description: Passenger vehicles. The engine auxiliary/cooling fan operation, including variable speed, is electronically controlled. Failure of the fan motor can cause the electrical circuitry of the fan control unit to overload and fail, causing the fan to stop operating.
The bearings of the high pressure fuel injector pump may fail after a short travelled distance (approximately 3000 to 6000 miles) This leads to a total failure of the engine's fuel supply which results in the engine stalling.
Due to a hardware fault within the digital engine electronic control unit the possibility exists that the unit could fail completely resulting in loss of engine power.
On certain 745I, 745LI and 760LI vehicles, insufficient torque may have been applied to the engine oil filter drain plug which could lead to a loosening of the plug causing an initial oil spray and a subsequent oil leak. If this happens, the oil pressure warning light will illuminate, and the message "Engine oil pressure! Stop carefully" will appear in the vehicle's instrument cluster message display area. If a large amount of oil loss occurs, engine damage may result. Correction: Dealer will retorque the engine oil filter drain plug.
On certain passenger vehicles, the engine oil filter drain plug may be insufficiently tightened. This could lead to loosening of the plug causing an initial oil spray and a subsequent oil leak.
On certain passenger vehicles, due to a software error, a desynchronization of the valvetronic motors for engine banks i and ii may occur. If this occurs, the engine could stall.
Due to an ECU software error within the electrical system the fuel pump may operate at an insufficient speed once the fuel tank level has been reduced to less than 30 litres.
On certain 745I and 745LI vehicles the electric fuel pump runs at a rotational speed that could result in reduced lubrication of its internal components. Over an extended period of time, wear-induced internal damage to the fuel pump could result in insufficient fuel supply to the engine when the fuel tank contains one-third or less of its maximum fuel capacity. If this were to occur, the engine could stall and not be restarted until more fuel was added to the fuel tank. This could occur even though the fuel gauge indicated that fuel still remained in the tank. Correction: Dealers will reprogram the fuel pump control system.
On certain passenger vehicles, the electric fuel pump runs at a rotational speed that could result in reduced lubrication of its internal components. Over an extended period of time, wear-induced internal damage to the fuel pump could result in insufficient fuel supply to the engine when the fuel tank contains one-third or less of its maximum fuel capacity.