本档案收录BMW X2 I的已知缺陷,由社区撰写并注明出处。阅读免费;注册免费账户即可贡献。当足够多的可信贡献者验证后,缺陷将获得印章。
最严重的缺陷
此筛选条件下暂无已记录的缺陷。
召回中等制动EU
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident.
召回严重内饰EU
Le propergol dans l'airbag du conducteur peut se détériorer avec le temps. si les airbags se déploient, cela pourrait entraîner des fragments du gonfleur blessant les occupants du véhicule.
召回中等制动UK
On certain vehicles the Integrated Brake (IB) system may be impaired due to contamination between electrical contacts.
通报轻微其他NA
Central Locking Switch Return
通报轻微电气NA
Once the Telematics Module (TCB2) enters sleep mode, a BMW Data Services trigger for Remote Services(remote engine start, lock/unlock/climate conditioning) will not be able to reactivate the TCB2. Due to this issue, Remote Services will not function in the vehicle when parked and locked.
通报轻微悬架NA
During inspection and/or diagnosis there is noticeable dirt/grease buildup on the axles near the inner and/orouter CV boots.
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)。