Fuel system, gasoline:Storage:Tank assembly
A fuel tank leak could occur due to small creases on the tank underside cracking during pressure cycling which occurs during normal operation.
🔔 注册免费账户,接收 Buick Skyhawk (所有代) 的邮件提醒
A fuel tank leak could occur due to small creases on the tank underside cracking during pressure cycling which occurs during normal operation.
The fuel feed and/or return hose/pipe assemblies could crack or separate, allowing fuel to leak into the underhood area.
On vehicles with 2.0l engines, the fuel feed and return hose assemblies may have been manufactured with improperly crimped fittings.A hose assembly with this condition may crack or separate from the fittng, allowing fuel to leak in the underhood area. This could result in an underhood fire. Correction:Hose assemblies will be replaced.
The engine air cleaner plastic trim cover could fall off the air cleaner assembly and land on the exhaust manifold creating a fire hazard. Consequence of defect: If the car is being operated at the time that the plastic trim cover falls off, an engine compartment fire could occur without warning.
The brake proportioner valves may break and separate from the master cylinder during braking. This will result in a loss of brake fluid and a partial loss of braking action
Possible fuel leakage could occur at the throttle body injection fuel feed pipe connection on the involved vehicles.
Under certaain conditions, the hose clamps on the fuel tank filler pipe and fuel tank filler vent pipe could fracture. The fracture of these clamps could cause fuel leakage at any of the four pipe to hose connections. Leakage can occur during refueling, or while driving, if the fuel tank is above 3/4 full.
Under certain conditions the hose clamps on the fuel filler pipe and fuel tank filler vent pipe could fracture. This could cause seepage of fuel at any one of the four pipe to hose connections when the fuel tank is above 3/4 full creating the possibility of fire.
内部腐蚀的 Pulsair 单向阀组件可能导致废气熔化塑料截止阀,并将阀门碎片吸入空气滤清器和节气门体。 Wait, I should translate more precisely. "Pulsair" is a product name (secondary air injection pump system), keep as is. Let me refine the translation. 内部腐蚀的 Pulsair 单向阀组件可能使废气熔化塑料截止阀,并将阀门碎片吸入空气滤清器和节气门体中。
On vehicles with a manually adjusted driver's seat, the metal floor pan anchor bar could fatigue and break around the left front outer seat adjuster stud. This could allow the stud to separate from the anchor bar and cause the driver's seat to tip rearward unexpectedly, resulting in possible loss of control and vehicle crash without prior warning. Correction: A reinforcement bracket will be installed on the floor pan anchor bar.
金属地板底盘锚定杆可能会在驾驶员座椅左前外侧座椅调节器螺柱周围疲劳断裂,导致螺柱与地板底盘锚定杆分离。
Parking brake lever mechanisms may not properly engage when applied as required by fmvss 105. Consequence of defect: Vehicle could unexpectedly roll away uncontrolled, which could result in a vehicle crash.
These vehicles do not comply with c.M.V.S.S.108 - lighting equipment. Buick skyhawk custom 2 and 4 door sedans and limited 4 door sedans.
Incorrect tail lamp lens were installed, lens do not conform to fmvss 108, lamp reflective device and associated equipment. Consequence of defect: In times of reduced visibility, an approaching vehicle may not be aware of this vehicle which could result in a vehicle crash without prior warning.
On certain vehicles, the front seat back locks may not lock under forward load conditions and are therefore not in compliance with CMVSS 207 - Seat Anchorages.
Some vehicles have bucket seat back locks that do not conform to federal motor vehicle safety standard 207, anchorage of seats. In event of a crash, the seat back lock may not function.
The brake proportioner valves may break and separate from the master cylinder. This would allow brake fluid to leak and would result in a partial loss of the brake system.
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。