During deployment of the passenger air bag, the air bag fabric may snag on a reinforcement inside the instrument panel, causing the expanding bag to lift the instrument panel and then deploy under the instrument panel pad instead of through the door in the instrument panel. The reinforcement may also fracture. In a crash, the front seat passenger could receive more severe injuries if he or she contacts a broken reinforcement or if the snagging affects the deployment of the bag. Correction: Dealers will inspect the instrument panel pads and, if necessary, install a plastic edge protector to the instrument panel pad reinforcement. On certain early production vehicles, the instrument panel pad will be replaced.
During deployment of the passenger air bag, the air bag fabric can snag on a reinforcement inside the instrument panel, causing the expanding air bag to lift the instrument panel pad and then deploy under the instrument panel instead of through the door in the instrument panel.
The passenger's side easy-entry seat adjuster may fail fully lock into position after the seat back has been tilted forward and the seat slid forward, then returned to its original postition.
Note: Coupe models only. The passenger side "easy-entry" seat adjuster may fail to fully lock onto position after the seat back has been tilted forward and the seat slid forward and then back to its original position to allow entry to or exit from the rear seat area. If the seat is not fully locked in position, the entire seat assembly could slide forward in the event of a sudden stop or collision and could result in serious injury to the seat occupant. Correction: Passenger's side "easy-entry" seat adjuster mechanism will be replaced on involved vehicles.
Some vehicles have bucket seat back locks that do not conform to federal motor vehicle safety standard 207, anchorage of seats. In event of a crash, the seat back lock may not function.
Vehicles do not comply to federal motor vehicle safety standard no. 207, "anchorage of seats". The lock bar in the front seat adjuster assemblies may not engage properly and the ability of the seat adjuster to maintain the seat in a latched position during an accident may be reduced.