Brake backing plate (US safety investigation)
NHTSA, the US road safety agency, opened an engineering analysis (EA86006) into this problem on 27 November 1985 for 1980–1981 models; it was closed on 28 November 1988 without a recall.
本档案收录Buick 君威 II的已知缺陷,由社区撰写并注明出处。阅读免费;注册免费账户即可贡献。当足够多的可信贡献者验证后,缺陷将获得印章。
NHTSA, the US road safety agency, opened an engineering analysis (EA86006) into this problem on 27 November 1985 for 1980–1981 models; it was closed on 28 November 1988 without a recall.
NHTSA, the US road safety agency, opened a preliminary evaluation (PE89104) into this problem on 17 March 1989 for 1985–1986 models; it was closed on 12 May 1989 without a recall.
NHTSA, the US road safety agency, opened a preliminary evaluation (PE89145) into this problem on 21 July 1989 for 1985–1987 models; it was closed on 22 September 1989 without a recall.
A small nylon bushing in the cruise control servo bail (bracket) may slip out of place resulting in possible intermittent increases in engine speed or dieseling. This condition could also cause the servo rod assembly to wear through the ball and catch on other components possibly resulting in a stuck throttle. This could result in loss of vehicle control and a possible crash. Correction: A bushing kit will be installed on the cruise control servo bail.
A small nylon bushing in the cruise control servo bail may slip out of place, causing intermittent and unexpected increases in engine speed or dieseling (engine run on with ignition off).
These vehicles do not comply with c.M.V.S.S. 1105 - evaporative emissions. Correction: A staged purge control valve will be installed between the charcoal canister and the carburetor.
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)。