Vehicle description: Certain van, wagon, pickup trucks, passenger and sport utility vehicles, fail to comply with requirements of fmvss no. 209, "seat belt assemblies." the front seat belt retractor may not comply with the requirements of the standard.
On certain vehicles, the passenger side air bag inflator assembly contains an incorrect inflator charge. This condition could increase the risk of a passenger occupant injury in the event of a crash. Correction: Passenger air bag modules will be replaced.
Vehicle description: Passenger vehicles built with 3.5l engines. The fuel injection delivery system can leak fuel from some of the sealing o-rings or from hair line cracks in the thermoset fuel injection rail.
Vehicle description: Certain passenger vehicles (non-sunroof only) fail to comply with the requirements of federal motor vehicle safety standard no. 201, "occupant protection in interior impact."
Vehicle description: Passenger vehicles. The molding flash on the primary lever may prevent the operation of the g-lock and tilt lock functions on some of the driver's side retractors.
These vehicles do not comply with c.M.V.S.S. 210.1 - tether anchorages for child restraints. No provision for tether anchorage at outboard seating positions. Correction: Both outboard tether anchorage locations will be reworked to meet the requirements of the standard.
The right side steering tie rod may rub against the automatic transmission wiring harness insulation resulting in a short circuit. This could cause electrical system malfunctions, including engine die out and an inoperative park/starter interlock system. Correction: A revised wiring harness bracket and plastic convolute sleeve will be installed to protect the transmission wiring harness.
The right steering tie rod can rub through the automatic transmission wiring harness causing a short circuit which results in electrical system malfunctions including engine stalling and an inoperative park/starter interlock system.
Certain vehicles may not comply with CMVSS 1101 - emission device. The wrong vehicle emission control information label (VECI) may have been installed on the subject vehicles. Correction: Correct VECIlabel along with installation instructions will be mailed to owners.