Vehicle description: Certain van, wagon, pickup trucks, passenger and sport utility vehicles, fail to comply with requirements of fmvss no. 209, "seat belt assemblies." the front seat belt retractor may not comply with the requirements of the standard.
Vehicle description: Passenger vehicles built with 3.5l engines. The fuel injection delivery system can leak fuel from some of the sealing o-rings or from hair line cracks in the thermoset fuel injection rail.
Vehicle description: Passenger vehicles built with 3.3l engines. The 'o-rings' used to seal the interface of the fuel injector rail supply, return and cross over tubes are not as robust as those used in later model years. Deterioration of the 'o-rings' can cause fuel leakage.
Vehicle description: Certain passenger vehicles (non-sunroof only) fail to comply with the requirements of federal motor vehicle safety standard no. 201, "occupant protection in interior impact."
Vehicle description: Non-abs equipped passenger vehicles. The brake master cylinder piston retainer snap ring may have been bent inward during the assembly process. The master cylinder piston may be in a "brake applied" position due to the damaged piston retainer snap ring. When the piston is in the applied position, the fluid compensation ports are closed which results in a brake drag condition.
Vehicle description: Passenger vehicles. The molding flash on the primary lever may prevent the operation of the g-lock and tilt lock functions on some of the driver's side retractors.
The right steering tie rod can rub through the automatic transmission wiring harness causing a short circuit which results in electrical system malfunctions including engine stalling and an inoperative park/starter interlock system.