Airbags: problems reported by owners
221 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2005–2008), typically at around 95,000 miles. Reported consequences: 30 crashes, 1 fire, 37 injuries, 1 death.
🔔 注册免费账户,接收 Dodge Magnum (所有代) 的邮件提醒
Dodge Magnum 所有代的全部信息:缺陷、召回、技术通报和讨论。选择某一代以缩小范围。
221 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2005–2008), typically at around 95,000 miles. Reported consequences: 30 crashes, 1 fire, 37 injuries, 1 death.
63 owners in the United States reported problems with the engine and cooling of this car to NHTSA (model years 2005–2008), typically at around 54,000 miles. Most often named: engine (25%). Reported consequences: 1 crash, 2 fires, 1 injury.
NHTSA, the US road safety agency, opened an engineering analysis (EA21002) into this problem on 17 September 2021 for 2005–2008 models; it was still open.
NHTSA, the US road safety agency, opened a preliminary evaluation (PE13016) into this problem on 9 May 2013 for 2006 models; it was closed on 10 February 2014 without a recall.
261 owners in the United States reported problems with the fuel system of this car to NHTSA (model years 2005–2008), typically at around 80,000 miles. Reported consequences: 4 crashes, 1 injury.
在安全气囊被触发时,内部压力过高可能导致气囊充气器外壳破裂,金属碎片可能穿过气囊织物,造成车内乘员受伤,甚至在最严重的情况下导致死亡。该问题的成因是空气中的水分穿过失效的密封件,并被充气器内的火药药片(pyrotechnic biscuits)吸收。因此,在湿度高且昼夜温差大的地区,该问题更容易较早出现。
De behuizing van het opblaassysteem van de passagiersairbag kan barsten als gevolg van interne overdruk wanneer de airbag in normale omstandigheden wordt opgeblazen.
null A fault in the gas generator of the front passenger airbag may cause uncontrolled inflation when the airbag is activated and result in small metal particles being released, which might injure the occupants.
**连接器套件** 在订购此连接器维修套件 68018957A$ 之前,请先在 Mopar 连接器维修套件网站上核实零件号和适用性。维修资料库中的线路图存在错误,导致显示的维修套件零件号不正确。在该问题解决之前,请使用 Mopar 连接器维修套件网站。
**连接器套件** 在订购此连接器维修套件 68018957A$ 之前,请先通过 Mopar 连接器维修套件网站确认零件号和适用性。维修资料中的接线图存在错误,导致显示了不正确的维修套件零件号。该问题解决之前,请使用 Mopar 连接器维修套件网站。
变速器总成(含液力变矩器) 1. 适用于所有 Promaster (VF) 3.6L/62TE 车型。如果在维修过程中拆下变速器支架与变速器壳体之间的紧固件,这些紧固件(零件号 06511385A$)为一次性使用件。2015年10月23日之前生产的车辆需要使用维修套件 PN 68461214AA,该套件包括变速器隔振器 PN 68264483AA、转接支架 68264479AA 以及紧固件维修套件 PN 68329056AA。2015年10月23日当天或之后生产的车辆仅需使用紧固件维修套件 PN 68329056AA。 2. 适用于所有 3.6L/62TE 车型。如果正在维修的车辆飞轮板出现裂纹或泵轴套失效,请检查并确认发动机缸体中的两(2)个定位销均已安装到位,这两个定位销用于使变速器中心线与曲轴中心线对齐;同时目视检查变速器壳体上的定位销对准孔。如果这些孔损坏或变形拉长,则应更换变速器,以防止因维修时无法使发动机与变速器正确对中而导致变速器/飞轮板或泵轴套进一步损坏。 3. 适用于所有 62TE 车型。如果泵轴套划伤或损坏,而定位销对准孔完好,则应更换泵总成,而不是更换整个变速器。 4. 适用于所有 62TE 车型。如果车辆出现抖动/打滑,并伴有故障指示灯代码 P0740 或 P2764,请检查 TCC 电磁阀工作状况。如果 TCC 电磁阀正常,则这些代码表明液力变矩器故障,应更换液力变矩器。
缺陷和讨论按代归档:请先在上方选择一代再发布。
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。