Airbags: problems reported by owners
11 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2003–2006), typically at around 13,000 miles. Reported consequences: 3 crashes, 5 injuries.
DDodge 毒蛇
2002–2006 · 已记录1项缺陷 · 2个市场
本档案收录Dodge 毒蛇的已知缺陷，由社区撰写并注明出处。阅读免费；注册免费账户即可贡献。当足够多的可信贡献者验证后，缺陷将获得印章。
车主经常报告这款车的airbags问题（11 条投诉），但还没有人解释原因。您知道吗？撰写条目
最严重的缺陷
查看全部 (1) →最新官方召回
查看全部 (9) →Motorrijtuigen - carrosserie (beschermingsmiddelen inzittenden)
In de airbag- en gordelspannerregelmodule kan een storing optreden.
Seat belts:Pretensioner
Chrysler (FCA US LLC) is recalling certain 2005-2006 Dodge Viper vehicles. The Occupant Restraint Control (ORC) module may inadvertently deploy the air bags and/or seat belt pretensioners.
Motorrijtuigen - carrosserie (beschermingsmiddelen inzittenden)
In de airbag- en gordelspannerregelmodule kan een storing optreden.
最新技术服务通报
查看全部 (19) →通报
Module kit - occupant restraint
通报
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
通报
Cracked windshield due to being hit by a foreign object like a stone. *kb
来源：NHTSA（美国，公有领域）、加拿大交通部（加拿大开放政府许可）、DVSA（英国，开放政府许可 v3.0）、RappelConso 与欧盟 Safety Gate（法国，开放许可 2.0）。