Airbags: problems reported by owners
93 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2019–2022), typically at around 65,000 miles. Reported consequences: 16 crashes, 22 injuries.
🔔 注册免费账户,接收 Honda 雅阁 IX (2012) 的邮件提醒
本档案收录Honda 雅阁 IX (2012)的已知缺陷,由社区撰写并注明出处。阅读免费;注册免费账户即可贡献。当足够多的可信贡献者验证后,缺陷将获得印章。
93 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2019–2022), typically at around 65,000 miles. Reported consequences: 16 crashes, 22 injuries.
NHTSA, the US road safety agency, opened an engineering analysis (EA24002) into this problem on 15 April 2024 for 2019–2022 models; it was still open.
NHTSA, the US road safety agency, opened a preliminary evaluation (PE22003) into this problem on 21 February 2022 for 2019 models; it was closed on 18 April 2024 without a recall.
乘客座椅的重量传感器因电路板故障而无法正常工作。
조수석 좌석 중량 센서 회로 기판에 품질이 좋지 않은 재료가 사용되어 제작 과정에서 균열이 발생할 수 있고 차량 사용 중 습도 등의 환경 요인으로 인해 수분이 균열 부분에 침투되면 단락 또는 고장이 발생할 수 있음. 중량 센서에 단락 또는 고장이 발생하면 SRS 경고등이 점등된 후 차량 충돌 시 조수석 에어백의 작동을 억제해야 하는 유아용 시트나 어린이가 앉아 있는 상황에서 에어백이 전개되어 상해를 입을 수 있는 가능성이 확인됨에 따른 리콜 <대상차량별 생산일자>ACCORD: 2020.11.30 ACCORD: 2018.09.05 ACCORD HYBRID: 2018.05.30~2021.03.06 CR-V 2WD: 2018.11.30~2022.06.14 CR-V 4WD: 2017.09.19 CR-V HYBRID: 2020.12.10~2021.03.17 ODYSSEY: 2020.11.30~2022.06.30 PILOT: 2017.07.14~2021.03.13
由于前排乘员座椅重量传感器的电路板故障,前排乘员座椅的乘员检测系统可能会识别出转向盘传感器(SWS)故障,并导致辅助约束系统(SRS)警告灯点亮。这可能导致安全气囊误触发,从而使坐在前排乘员座椅上的儿童面临受伤风险。
Owner Notification Letter - The driven pulley in the transmission (CVT) was not properly hardened due to improper heat treatment during the manufacturing process. Over time, this may lead to abnormal wear to the driven pulley or damage to the CVT belt which may cause the vehicle to experience a slip accompanied by an abnormal noise and multiple warning lights illuminating. This may lead to not being able to move forward after coming to a stop.
Owner Notification Letter - The driven pulley in the transmission (CVT) was not properly hardened due to improper heat treatment during the manufacturing process. Over time, this may lead to abnormal wear to the driven pulley or damage to the CVT belt which may cause the vehicle to experience a slip accompanied by an abnormal noise and multiple warning lights illuminating. This may lead to not being able to move forward after coming to a stop.
Our records indicate that an Emissions Recall has not been completed on this vehicle (Vehicle Identification Number XXXXXXXXXXXXXXXXX). During the manufacturing of certain fuel tanks on some 2020 Accord vehicles, a protective layer was not properly applied. An improperly manufactured fuel tank may cause the release of evaporative emission air pollutants at levels that exceed state and federal standards.
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。