184 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1998–2002), typically at around 65,000 miles. Most often named: frontal (25%), side/window (16%). Reported consequences: 68 crashes, 78 injuries, 7 deaths.
102 owners in the United States reported problems with the engine and cooling of this car to NHTSA (model years 1998–2002), typically at around 72,000 miles. Most often named: engine (25%), engine:gasoline (25%). Reported consequences: 6 crashes, 2 fires, 6 injuries, 7 deaths.
84 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 1998–2002), typically at around 74,000 miles. Reported consequences: 2 crashes, 12 fires, 1 injury.
Where road salt is used to clear the snow in winter it is possible that road salt can accumulate on certain areas of the rear sub-frame and cause corrosion. If action is not taken to address this build up of corrosion it could ultimately cause the loss of control of the vehicle.
Hyundai is recalling 82 model year 2002-2003 sonata vehicles. Repeated use of the interior door handle may cause wear of the chrome plating. If the top edge of the handle has very thin chrome plating that portion of the plating may wear away more easily than more thickly plated areas as the door handle is used. The worn chrome plating on the upper edge of the handle may result in a crack or separation between the chrome plating on the inboard and outboard surfaces of the handle, which may form a sharp edge.
On certain vehicles, repeated use of an interior door handle may wear the chrome plating on the upper edge of the handle. This may result in a crack or separation between the chrome plating - forming a sharp edge which could injure a user's finger. Correction: Dealers will inspect and, if necessary, replace interior door handles.
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.