The normal lockup function of the automatic (passive) belt reel can cause the belt motor winch assembly to lockup such that the passive belt system will not deploy/function or gets stuck at various points along the track causing the kinking or breaking of its cable or detachment of the tongue.
The high tension lead from the ignition coil may move from its production location closer to the #4a fuel injector hose. This could result in ozone degradation of the injector hose and possible fuel leaks. Such leaks could cause an underhood fire. Correction: Both "a & b" bank high tension king leads will be replaced. #4 injector hose will be inspected for signs of cracking/splitting and replaced as necessary.
The high tension lead from the ignition coil can move from the production location closer to the #4a fuel injector hose. This could lead to the outer and inner injector hoses cracking or splitting from ozone deterioration.
Note: 1978-90 models excessive fuel vapour pressure can occur such that a weakening of the fuel tank structure can result in fuel leaks. In the presence of an ignition source, a vehicle fire could result. Correction: Dealers will install a revised fuel purge system which eliminates excessive vapour pressure build-up.
Xj-s 1982-90 xj12/vanden plas 1980-90 dirt ingress may cause the electronically controlled valves in the cruise control actuator to malfunction. If this occurs, the cruise control will fail to disengage under normal operating conditions resulting in possible loss of driver control. Correction: Cruise control actuator operation will be checked and an additional vacuum dump will be installed.
Possible fuel leakage from the engine fuel injection system, particularly in the area of the hose/clip fittings. Consequence of defect: The presence of an ignition source, with fuel leakage, could result in an engine compartment fire or the destruction of ignition distributor cap.
Due to misalignment of fuel rail halves and effects of temperature change on the connections, there is the possibility of fuel leakage at the fuel rail joints. Fuel leakage could present the potential for fire. Vin - xj12 - 310613 to 365261 xjs - 104146 to 111980
Fuel leakage may develop at the two main fuel rail connections. Deterioration at these two connections has been traced to a combination of misalignment of the two rail halves and the effect of temperature changes.
Certain vehicles could be subject to a fuel leakage in the engine compartment due to the possibility of deterioration in the integrity of the high pressure fuel hose connections.
V.I.N. Xj12 - 310613 to 431598 xjs - 104146 to 125224 a potential exists for leakage from the fuel delivery system which could result in engine compartment fires.
The supplier of the fuel cut-off inertia switch made unauthorized changes to the switch contacts. Under certain conditions a high electrical resistance and open circuit may result, preventing current flow to the fuel pump.
Certain vehicles may be fitted with an unauthorized fuel pump electrical inertia switch. This switch has a tin coating added to the contacts that create the potential for a high electrical resistance. This could cause overheating and possible distortion of the plastic mounting around the fixed contact. This could result in inability to start the vehicle since there is a flow of current to the fuel pump.