On certain vehicles, due to improper assembly of the air bag inflator, which is used in the side air bag, the curtain shield air bag, and the knee air bag assembly, some inflators were produced with an insufficient amount of the heating agents necessary for proper air bag deployment. In this condition, the expansion force of the gas may be insufficient to properly inflate the air bag when the srs system is activated during a crash.
This vehicle may contain inadequate side airbag inflators. The airbag inflators were produced with an insufficient amount of the heating agents which apply heat to the argon gas in the inflator. In this condition, expansion force of the gas in the inflator may be insufficient to properly inflate the airbag when the system is activated during a collision, which can increase the risk of injury. Correction: Dealer will replace the side airbag module.
On certain GS 300, GS 300 AWD, GS 430, IS 250, IS 250 AWD and IS 350 vehicles, the front seat belt retractors may contain an inappropriately sized part for the emergency locking system. This can prevent the locking system from releasing when it is activated. If the seat belt is locked in this condition, the occupant may either not fasten the seat belt, or be inadequately restrained due to improper belt-fit thereby increasing the risk of injury. Correction: Dealers will replace the front seat belt assemblies.
On certain passenger vehicles, if the front seat belt retractors (both driver and front passenger) become locked, they may not release due to a component of the emergency locking system. If the seat belt is locked in this condition, the occupant may not be able to properly fasten the seat belt.