On the subject vehicles the control logic which monitors the charging control program fails to divert the electrical power away from the capacitor when a fault is detected within the capacitor circuit. This can cause a short circuit inside the DCDC converter and could cause the engine to stall or overheating of the DCDC converter itself which could cause a fire. The fault is accompanied by the �i-ELOOP� warning light being illuminated on the instrument cluster along with the �i-Stop� warning light flashing The engine may in some circumstances stall and fail to restart. In extreme cases the DCDC converter could overheat and cause a fire
The engine control unit of the direct-current converter may be defective. This could result in a short circuit and damage of the converter, which can lead to a fire.
Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31, 2015. The lower mounting nuts and bolts that attach the front strut assembly to the steering knuckle may loosen, allowing the steering knuckle to separate.
On certain vehicles, the nut and bolt holding the strut assembly to the knuckle may not have been tightened properly during the manufacturing process. Over time, this could cause the strut assembly to separate from the knuckle, resulting in a loss of steering control which would increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will inspect and replace the nut and bolt holding the strut assembly to the knuckle if found loose.
Mazda North American Operations (Mazda) is recalling certain 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles. The rearview camera image may not display properly by showing a flickering or distorted image.
Mazda North American Operations(Mazda)正在召回部分2018年款Mazda3、Mazda6,2019年款CX-3,2018–2019年款MX-5、CX-5、CX-9,以及2019–2020年款Mazda2车辆。低压燃油泵内部的叶轮可能开裂和变形,从而可能导致燃油泵故障。
On the subject vehicles the engine protection logic does not work properly. When the engine speed reaches maximum with no engine load present � the software is unable to cut the engine. This could in extreme cases cause catastrophic engine failure. Immediate and catastrophic engine damage may result.
Mazda North American Operations(Mazda)正在召回部分2010至2013年款Mazda3和Mazdaspeed3车辆,生产日期为2008年11月18日至2013年6月8日;2012至2015年款Mazda5车辆,生产日期为2010年10月26日至2015年6月22日;2016年款CX-3车辆,生产日期为2015年6月1日至2015年12月26日;以及2013至2016年款CX-5车辆,生产日期为2011年12月15日至2015年12月26日。在受影响的车辆上,后掀门支撑撑杆可能发生腐蚀,进而可能导致撑杆断裂和/或后掀门意外下落。