免费阅读 · 免费账户即可贡献Anticars(2000)的继任者

Mercedes-BenzMercedes-Benz CLK级

1997–2008 · 2 各代车型 · 已记录34项缺陷 · 2个市场
各代车型

Mercedes-Benz CLK级 所有代的全部信息:缺陷、召回、技术通报和讨论。选择某一代以缩小范围。

最严重的缺陷

查看全部 (34) →
m

Electrical system: problems reported by owners

39 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 1998–2002), typically at around 61,000 miles. Most often named: instrument cluster/panel (44%). Reported consequences: 4 fires, 1 injury.

✓ Mecafile 对官方数据的分析1998–2002以原文(英语)显示 · 翻译待完成查看详情 →
m

Transmission and drivetrain: problems reported by owners

18 owners in the United States reported problems with the transmission and drivetrain of this car to NHTSA (model years 1999–2002), typically at around 70,000 miles. Most often named: automatic transmission (39%), automatic transmission:control module (tcm/pcm/tecm) (17%), automatic transmission:gear position indication (prndl) (17%). Reported consequences: 2 crashes, 1 fire.

✓ Mecafile 对官方数据的分析1999–2002以原文(英语)显示 · 翻译待完成查看详情 →
m

Airbags: problems reported by owners

10 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1999–2002), typically at around 81,000 miles. Most often named: side/window (20%). Reported consequences: 7 crashes, 7 injuries.

✓ Mecafile 对官方数据的分析1999–2002以原文(英语)显示 · 翻译待完成查看详情 →

最新官方召回

查看全部 (36) →
CLK级 C209 · 2001–2008
召回中等车身NA

Visibility:Sun/moon roof assembly

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please see the recall report for a complete list of models and model years. The glass sunroof panel may not be properly secured and can detach.

NHTSA · 美国2024年11月19日24V874000车型年份 2003–2009以原文(英语)显示 · 翻译待完成查看详情 →
CLK级 C208 · 1997–2002CLK级 C209 · 2001–2008
召回中等车身JP

車体

スライディングルーフのガラスパネルにおいて、製造管理が不適切なため、接着強度が不十分なものがある。そのため、ガラスパネルに浮きが発生し、最悪の場合、走行風により脱落して、後続車両の妨げになるおそれがある。

国土交通省 · 日本2023年6月22日1236290车型年份 2000–2009以原文(日语)显示 · 翻译待完成查看详情 →
CLK级 C208 · 1997–2002CLK级 C209 · 2001–2008

最新技术服务通报

查看全部 (94) →
CLK级 C209 · 2001–2008
通报轻微车身NA

通报

Complaint Clanking noise from the area of the speakers in the doors. Cause Under analysis. Remedy To narrow down the cause, first of all remove the door trim. If the noise continues to occur even with the door trim removed, then continue the diagnosis working towards the speaker and if necessary, create a TIPS case with an informative video as an attachment. Note: Please refer to this document in the warranty claim and, once diagnosis is completed, select the damage code depending on the component part that is causing the issue. If the noise stops when the door trim is removed, please proceed in accordance with LI72.10P067691. Information: In this case, do not use a damage code for the speakers in the warranty claim!

NHTSA · 制造商通报11038217车型年份 2007–2008以原文(英语)显示 · 翻译待完成查看详情 →
CLK级 C209 · 2001–2008
通报中等制动NA

通报

Complaint Repeat workshop visit for vehicle vibration while braking from 60MPH. NOTE: Although the symptom is similar to a tire or wheel vibration, it is usually readily noticeable that it is distinctly different if it happens at all times or only while braking. Cause Although the cause of the vibration is most likely due to excessive lateral runout on the rotor or hub/wheel bearing, the system as a whole needs to be checked for other possible contributors. 1. Prior collision damage. 2. Excessive vehicle sitting times without rotating components. 3. Wheel bearing/hub lateral runout. 4. Wheel mating interface has been overtightened (did not follow WIS torque procedures). 5. Mating interfaces have been excessively modified (painted, gouged, bent, etc...). Remedy Read through the entire attached worksheet prior to performing. After performing, please review the final page and perform work accordingly. NOTE: This document is not preauthorization or otherwise dealing with warranty. This is intended for diagnostic purposes only. If there are any questions on how to proceed OR The work sheet has been performed and the vehicle has returned with the same concern. Please perform the measurements as seen in the worksheet again and open a TIPS case to the Body, Chassis, and Entertainment team.

NHTSA · 制造商通报11038186车型年份 2007–2008以原文(英语)显示 · 翻译待完成查看详情 →
CLK级 C209 · 2001–2008
通报中等制动NA

通报

Complaint Noises/ squealing from the service brake in various driving situations and ambient conditions. Cause Frictional vibrations Remedy The intent of this document is to reduce noise from high performance AMG brakes. AMG brakes are designed for performance under high load and in certain scenarios, can emit noise. Some scenarios are normal and some are induced by driving style like those listed below: Driving style such as two footed driving where the pad might be in constant contact with the rotor. Brake pressure and application style (stopandgo traffic with consistent light brake pressure riding brakes where the brakes cannot cool sufficiently between applications). This can cause the brake pads to glaze and have a smooth/glassy surface which can induce noise. When ambient temperatures rise during summer peak and during cooling and cold winter months. 1. Beginning Diagnostics: a) Check whether the complaint can be reproduced and at which axle or side the noises occur (ideally together with the customer while driving). b) Check the affected system for component wear, mechanical damage or localized overheating damage. Replace damaged components as necessary. c) Assess condition of brake rotors and pads per WIS and visually (i.e. long periods of stagnation, etc...). d) Clean brake components free of brake dust and debris. d) Secure vehicle on a lift. 1. Start the engine and depress the brake pedal 34 times. 2. Check each wheel to see if they turn freely by hand. 3. If a wheel is not turning freely by hand, this needs to be addressed prior to reassessing the noise concern. e) Check whether, apart from this document, an additional document exists for the specific model in question, and if so, work through it and then continue. 2. Specific Axle Work: NOTE: If the brake pad has a metal backing plate, there is no need to affix the adhesive film. Continue with applying chamfer and Molykote as instructed below. IMPORTANT: Be absolutely certain to not allow paste between friction surfaces of the pad and disc! a) If the noises are coming from the front axle. 1. Remove brake linings of front axle. 2. Clean all contact points on brake lining backing plate, including the brake lining guide pins and brake caliper/carrier. 3. Clean bonding surface (where pistons contact back of brake pad). Apply adhesive film to the backplate of the pistonside brake lining where the piston contacts the pad backing plate. See picture "Adhesive and Paste Application Area". 4. Be sure to remove both brown paper backing sides of the adhesive film, it is double sided adhesive film. 5. If adhesive is already installed on backing plate where pistons contact the back of the pad, you may gently scrape off and reapply a new adhesive or Molykote. Must not apply the Molykote on top of the adhesive. 6. Chamfer edges (gently round off sharp leading edges) on brake pads. Some pads have vertical grooves, these can be gently chamfered with a triangular file as well. See picture "Chamfering Technique". 7. Apply Molykote to the sides of the backing plate. See picture "Adhesive and Paste Application Area". 8. After installing the brake linings, actuate the brake for 30 seconds. b) If the noises are coming from the rear axle. 1. Remove brake pads of rear axle. 2. Clean all contact points on brake lining backing plate and brake caliper /carrier. 3. Clean bonding surface (where pistons contact back of brake pad). Apply adhesive film to the backplate of the pistonside brake lining. 4. Chamfer edges (round off sharp leading edges) on brake pads. See picture "Chamfering Technique". 5. Grease contact points (red areas on attachment "Rear Pad Grease Area") between brake lining and guide of brake caliper with Molykote. 3. Brake Bedding Process: a) Before trip, the mileage incurred must be clarified with the customer (approx. 30 miles). b) Select a suitable route so speeds of approximately 65 MPH can be achieved. c) If the vehicle is an AMG P3 Hybrid, switch off

NHTSA · 制造商通报11037487车型年份 2008以原文(英语)显示 · 翻译待完成查看详情 →

最新论坛话题

暂无讨论。

缺陷和讨论按代归档:请先在上方选择一代再发布。

来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。