Stalling problems (US safety investigation)
NHTSA, the US road safety agency, received a defect petition (DP84020) about this problem on 8 August 1984 for 1982–1983 models; it was closed on 11 April 1985 without a recall.
🔔 注册免费账户,接收 Nissan Stanza (所有代) 的邮件提醒
Nissan Stanza 所有代的全部信息:缺陷、召回、技术通报和讨论。选择某一代以缩小范围。
NHTSA, the US road safety agency, received a defect petition (DP84020) about this problem on 8 August 1984 for 1982–1983 models; it was closed on 11 April 1985 without a recall.
NHTSA, the US road safety agency, received a defect petition (DP88001) about this problem on 29 September 1987 for 1985 models; it was closed on 19 February 1988 without a recall.
NHTSA, the US road safety agency, opened a preliminary evaluation (PE88025) into this problem on 9 February 1988 for 1985 models; it was closed on 11 May 1988 without a recall.
NHTSA, the US road safety agency, opened an engineering analysis (EA89031) into this problem on 28 July 1989 for 1982–1984 models; it was closed on 31 October 1990 without a recall.
NHTSA, the US road safety agency, opened a preliminary evaluation (PE88092) into this problem on 9 August 1988 for 1982–1984 models; it was closed on 28 July 1989 without a recall.
It is possible for a mixture of mud and salt to get trapped between the fuel filler tube and wheel housing. The trapped mud and salt can result in corrosion of the fuel filler tube and the wheel housing.
Incorrect tire inflation pressures were printed on certification labels.
If a certain type of rear end collision occurs, the edge of a welded bracket on the floor panel subframe may pierce the fuel filler pipe. Consequence of defect: Fuel leakage would occur which could result in a fire. Vehicles would not comply with fmvss 301.
缺陷和讨论按代归档:请先在上方选择一代再发布。
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。