エアーバッグ
運転者席のエアバッグ装置において、コントロールユニット内部の衝撃波センサに半田不 良のものがあるため、半田部にクラックが入りエアバッグ警告灯が点灯することがある。 そのため、そのままの状態でホーンを非常に強く叩く又は深いくぼみを通過するなどの衝 撃が加わった場合に、エアバッグが展開するおそれがある。
🔔 注册免费账户,接收 Subaru Legacy (second generation) 的邮件提醒
運転者席のエアバッグ装置において、コントロールユニット内部の衝撃波センサに半田不 良のものがあるため、半田部にクラックが入りエアバッグ警告灯が点灯することがある。 そのため、そのままの状態でホーンを非常に強く叩く又は深いくぼみを通過するなどの衝 撃が加わった場合に、エアバッグが展開するおそれがある。
在某些车辆上,前拖车钩可能会接触路缘石、凹坑、减速带、坑洼等路面障碍,从而导致安全气囊意外弹出。更正:受影响车辆的前拖车钩将被拆除。
乘用车。在车辆底盘的拖车挂钩与路缘石、凹坑、减速带、坑洼等接触后,可能导致安全气囊意外弹出。
A weld fracture may occur on the hanger bracket of the front transverse links. This could result in separation of the bracket with subsequent failure of the lower suspension mounting and loss of vehicle control. Correction: Front transverse links will be inspected and replaced if necessary.
车辆描述:乘用旅行车、轿车和运动型多功能车。由于焊接不当,前横向连杆的支撑支架可能出现断裂。
Vehicle description: Passenger vehicles. The throttle shaft ball bearing on the sensor side of the throttle body assembly was not installed in certain throttle bodies.
Vehicle description: Passenger vehicles equipped with automatic transmissions. Due to poor welds, ignition keys can stick, shift levers/linkages can break and shift levers can move.
The automatic transmission shift lever assemblies on these vehicles may fail due to poor welds within the assembly. This can result in stuck ignition keys, broken shift levers/linkages and improper movement of shift levers. Correction: Automatic shift lever assembly will be replaced with one furnished by a different supplier.
The throttle shaft ball bearing on the sensor side of the throttle body assembly may not have been installed on these vehicles. This could eventually lead to incomplete return of the throttle valve and consequently a high idling condition. Correction: Throttle body will be inspected and if the bearing is missing, the throttle body will be replaced.
The hazard warning flasher button can bind in the housing causing continued operation of the hazard warning lamps, or their being turned off but the turn signals becoming inoperable. Correction: Dealers will install a modified hazard warning switch.
Vehicle description: Passenger vehicles. Insufficient clearance within the hazard warning light switch housing can cause a binding between the actuating button and the housing.
ターボ装着の原動機において、原動機制御のためのコンテロールユニットの条件判定プロ グラムに不適切な部分があり、エンスト直後の再始動に時間を要す場合がある。
発電機のダイオード(半導体)及びICレギュレータ(電圧調整器)に製造不良のもの があり、そのままの状態で使用を続けると、当該部品が接触不良を起こしてバッテリに充 電できなくなり、原動機が停止するおそれがある。
原動機に取り付けられているカム角センサ及びクランク角センサに製造不良のものがあ り、そのままの状態で使用を続けると、当該センサ内部で接触不良となって正常な信号を 発進しなくなり、最悪の場合、アイドリング時等に原動機が停止し、再始動できなくなる おそれがある。
某些配备前螺旋弹簧的乘用车。 前螺旋弹簧在生产时漆面质量不佳,在长期暴露于具有腐蚀性的盐分环境中后,弹簧可能断裂。根据断裂位置的不同,断裂的弹簧可能越过弹簧座并接触前轮胎。已有部分轮胎因与断裂的弹簧接触而泄气。 纠正措施:经销商将通知客户将车辆送至授权经销店,在两个前减震支柱上安装弹簧防护罩,以防止轮胎被刺穿,并免费更换任何已断裂的弹簧。
Vehicle description: Passenger vehicles equipped with front coil springs originally sold in or currently registered in the states of connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new york, new jersey, new hampshire, ohio, pennsylvania, rhode island, vermont, virginia, west virginia, and wisconsin, and in the district of columbia. The front coil springs were produced with poor paint quality which, after continued exposure to corrosive salt, can result in breakage of the spring.
某些车辆不符合第6条——合规声明的要求。关于车辆分类的合规标签未以两种官方语言表示。纠正措施:现有车辆不采取纠正措施。当前生产的车辆将加贴正确的合规标签。
非常点滅表示灯のスイッチに製造不良のものがあり、当該スイッチをオフにした時、完全 に戻らなくなる場合があり、最悪の場合、非常点滅表示灯が点滅し続けるか、方向指示器 が点滅しなくなるおそれがある。
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。