The front passenger airbag inflator module check valve pin is missing in the affected vehicle. In the event of airbag activation the partition which separates the inflator and the bag may not be properly broken resulting in insufficient pressure to properly deploy the airbag. This could result in injury to the front seat passenger in the event of a frontal impact.
If the air bag computer experiences a severe mechanical shock (for example, by a rapid operation of the front seat adjustment with a slamming into the stops, or a sudden release of the parking brake) within a very short period of time after the engine is started, the air bags may deploy inadvertently. This could result in occupant injury. Correction: Air bag computer will be repaired.
Due to an improper washing process of a metal part within the brake master cylinder there is a possibility that the groove for installing the rubber seal ring which is located at the end of the master cylinder may be corroded. In this condition brake fluid may leak from the seal or a small amount of air may enter the master cylinder which could lead to an increase in vehicle stopping distance.
If the air bag computer in a subject vehicle experiences a mechanical shock (i.E., rapidly moving the front seat back against the stops or a sudden release of the parking brake) within a very short time after the engine is started, the air bag can deploy inadvertently.