قراءة مجانية · حساب مجاني للمساهمةخليفة Anticars (2000)

Mercedes-BenzMercedes-Benz بنز الفئة سي إل كيه

1997–2008 · 2 الأجيال · 34 أعطال موثّقة · 2 أسواق
الأجيال

كل ما يخص Mercedes-Benz بنز الفئة سي إل كيه بجميع أجياله: الأعطال وحملات الاستدعاء والنشرات الفنية والنقاشات. اختر جيلًا لتضييق النتائج.

أخطر الأعطال

عرض الكل (34) →
m

Electrical system: problems reported by owners

39 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 1998–2002), typically at around 61,000 miles. Most often named: instrument cluster/panel (44%). Reported consequences: 4 fires, 1 injury.

✓ تحليل Mecafile لبيانات رسمية1998–2002معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
m

Engine and cooling: problems reported by owners

18 owners in the United States reported problems with the engine and cooling of this car to NHTSA (model years 1998–2002), typically at around 64,000 miles. Most often named: engine (44%). Reported consequences: 2 fires.

✓ تحليل Mecafile لبيانات رسمية1998–2002معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
m

Transmission and drivetrain: problems reported by owners

18 owners in the United States reported problems with the transmission and drivetrain of this car to NHTSA (model years 1999–2002), typically at around 70,000 miles. Most often named: automatic transmission (39%), automatic transmission:control module (tcm/pcm/tecm) (17%), automatic transmission:gear position indication (prndl) (17%). Reported consequences: 2 crashes, 1 fire.

✓ تحليل Mecafile لبيانات رسمية1999–2002معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
m

Airbags: problems reported by owners

10 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1999–2002), typically at around 81,000 miles. Most often named: side/window (20%). Reported consequences: 7 crashes, 7 injuries.

✓ تحليل Mecafile لبيانات رسمية1999–2002معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
m

Electrical system: problems reported by owners

34 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2003–2008), typically at around 70,000 miles. Reported consequences: 3 fires.

✓ تحليل Mecafile لبيانات رسمية2003–2008معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →

أحدث الاستدعاءات الرسمية

عرض الكل (36) →
بنز الفئة سي إل كيه C209 · 2001–2008
استدعاءمتوسطالهيكلNA

Visibility:Sun/moon roof assembly

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please see the recall report for a complete list of models and model years. The glass sunroof panel may not be properly secured and can detach.

NHTSA · الولايات المتحدة19 نوفمبر 202424V874000سنوات الطراز 2003–2009معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
بنز الفئة سي إل كيه C208 · 1997–2002بنز الفئة سي إل كيه C209 · 2001–2008
استدعاءمتوسطالهيكلJP

車体

スライディングルーフのガラスパネルにおいて、製造管理が不適切なため、接着強度が不十分なものがある。そのため、ガラスパネルに浮きが発生し、最悪の場合、走行風により脱落して、後続車両の妨げになるおそれがある。

MLIT · اليابان22 يونيو 20231236290سنوات الطراز 2000–2009معروض باللغة الأصلية (اليابانية) · الترجمة قيد الانتظارعرض التفاصيل →
بنز الفئة سي إل كيه C208 · 1997–2002بنز الفئة سي إل كيه C209 · 2001–2008
استدعاءمتوسطالهيكلEU

Due to improper adhesive bonding of the glass panel to the sliding roof frame, the panel may detach from…

Due to improper adhesive bonding of the glass panel to the sliding roof frame, the panel may detach from the moving vehicle, creating a risk of an accident, injuries.

Safety Gate · الاتحاد الأوروبي23 فبراير 2023A12/00391/23سنوات الطراز 2000–2009معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →

أحدث النشرات الفنية

عرض الكل (94) →
بنز الفئة سي إل كيه C209 · 2001–2008
نشرةطفيفالهيكلNA

نشرة

الشكوى: صوت طقطقة معدني صادر من منطقة مكبرات الصوت الموجودة في الأبواب. السبب: قيد التحليل. الإجراء العلاجي: لتضييق نطاق السبب، قم أولاً بإزالة تغطية الباب الداخلية. إذا استمر الصوت حتى بعد إزالة تغطية الباب، فتابع التشخيص باتجاه مكبر الصوت، وإذا لزم الأمر، أنشئ حالة TIPS مع فيديو توضيحي كمرفق. ملاحظة: يرجى الرجوع إلى هذه الوثيقة في مطالبة الضمان، وبعد اكتمال التشخيص، اختر رمز العطل بحسب الجزء المكوّن الذي يسبب المشكلة. إذا توقف الصوت عند إزالة تغطية الباب، فيرجى المتابعة وفقاً لـ LI72.10P067691. معلومات: في هذه الحالة، لا تستخدم رمز عطل لمكبرات الصوت في مطالبة الضمان!

NHTSA · نشرة المصنع11038217سنوات الطراز 2007–2008ترجمة آلية · اللغة الأصلية: الإنجليزيةعرض التفاصيل →
بنز الفئة سي إل كيه C209 · 2001–2008
نشرةمتوسطالفراملNA

نشرة

**الشكوى** زيارة متكررة للورشة بسبب اهتزاز المركبة أثناء الفرملة من سرعة 60 MPH. **ملاحظة:** على الرغم من أن الأعراض تشبه اهتزاز الإطار أو العجلة، فغالباً ما يكون من الواضح أنه مختلف إذا كان يحدث في جميع الأوقات أو فقط أثناء الفرملة. **السبب** رغم أن سبب الاهتزاز هو على الأرجح الارتجاج الجانبي المفرط للقرص أو لمحور/محمل العجلة، فإن النظام ككل يحتاج إلى فحص بحثاً عن عوامل محتملة أخرى: 1. تلف ناتج عن حادث تصادم سابق. 2. فترات توقف طويلة للمركبة دون تدوير المكونات الدوارة. 3. ارتجاج جانبي في محمل العجلة/المحور. 4. تم شد واجهة تركيب العجلة بشكل زائد (لم يتم اتباع إجراءات عزم الشد في WIS). 5. تم تعديل واجهات التركيب بشكل مفرط (طلاء، خدش، ثني، إلخ...). **الإجراء العلاجي** اقرأ ورقة العمل المرفقة بالكامل قبل التنفيذ. بعد التنفيذ، يرجى مراجعة الصفحة الأخيرة وتنفيذ الأعمال وفقاً لها. **ملاحظة:** هذه الوثيقة ليست موافقة مسبقة ولا تتناول الضمان. الغرض منها هو التشخيص فقط. إذا كانت هناك أي أسئلة حول كيفية المتابعة، أو إذا تم تنفيذ ورقة العمل وعادت المركبة بنفس الشكوى، يرجى إجراء القياسات الموضحة في ورقة العمل مرة أخرى، وفتح حالة TIPS لفريق الهيكل (Body) والشاسيه (Chassis) والترفيه (Entertainment).

NHTSA · نشرة المصنع11038186سنوات الطراز 2007–2008ترجمة آلية · اللغة الأصلية: الإنجليزيةعرض التفاصيل →
بنز الفئة سي إل كيه C209 · 2001–2008
نشرةمتوسطالفراملNA

نشرة

Complaint Noises/ squealing from the service brake in various driving situations and ambient conditions. Cause Frictional vibrations Remedy The intent of this document is to reduce noise from high performance AMG brakes. AMG brakes are designed for performance under high load and in certain scenarios, can emit noise. Some scenarios are normal and some are induced by driving style like those listed below: Driving style such as two footed driving where the pad might be in constant contact with the rotor. Brake pressure and application style (stopandgo traffic with consistent light brake pressure riding brakes where the brakes cannot cool sufficiently between applications). This can cause the brake pads to glaze and have a smooth/glassy surface which can induce noise. When ambient temperatures rise during summer peak and during cooling and cold winter months. 1. Beginning Diagnostics: a) Check whether the complaint can be reproduced and at which axle or side the noises occur (ideally together with the customer while driving). b) Check the affected system for component wear, mechanical damage or localized overheating damage. Replace damaged components as necessary. c) Assess condition of brake rotors and pads per WIS and visually (i.e. long periods of stagnation, etc...). d) Clean brake components free of brake dust and debris. d) Secure vehicle on a lift. 1. Start the engine and depress the brake pedal 34 times. 2. Check each wheel to see if they turn freely by hand. 3. If a wheel is not turning freely by hand, this needs to be addressed prior to reassessing the noise concern. e) Check whether, apart from this document, an additional document exists for the specific model in question, and if so, work through it and then continue. 2. Specific Axle Work: NOTE: If the brake pad has a metal backing plate, there is no need to affix the adhesive film. Continue with applying chamfer and Molykote as instructed below. IMPORTANT: Be absolutely certain to not allow paste between friction surfaces of the pad and disc! a) If the noises are coming from the front axle. 1. Remove brake linings of front axle. 2. Clean all contact points on brake lining backing plate, including the brake lining guide pins and brake caliper/carrier. 3. Clean bonding surface (where pistons contact back of brake pad). Apply adhesive film to the backplate of the pistonside brake lining where the piston contacts the pad backing plate. See picture "Adhesive and Paste Application Area". 4. Be sure to remove both brown paper backing sides of the adhesive film, it is double sided adhesive film. 5. If adhesive is already installed on backing plate where pistons contact the back of the pad, you may gently scrape off and reapply a new adhesive or Molykote. Must not apply the Molykote on top of the adhesive. 6. Chamfer edges (gently round off sharp leading edges) on brake pads. Some pads have vertical grooves, these can be gently chamfered with a triangular file as well. See picture "Chamfering Technique". 7. Apply Molykote to the sides of the backing plate. See picture "Adhesive and Paste Application Area". 8. After installing the brake linings, actuate the brake for 30 seconds. b) If the noises are coming from the rear axle. 1. Remove brake pads of rear axle. 2. Clean all contact points on brake lining backing plate and brake caliper /carrier. 3. Clean bonding surface (where pistons contact back of brake pad). Apply adhesive film to the backplate of the pistonside brake lining. 4. Chamfer edges (round off sharp leading edges) on brake pads. See picture "Chamfering Technique". 5. Grease contact points (red areas on attachment "Rear Pad Grease Area") between brake lining and guide of brake caliper with Molykote. 3. Brake Bedding Process: a) Before trip, the mileage incurred must be clarified with the customer (approx. 30 miles). b) Select a suitable route so speeds of approximately 65 MPH can be achieved. c) If the vehicle is an AMG P3 Hybrid, switch off

NHTSA · نشرة المصنع11037487سنوات الطراز 2008معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →

أحدث مواضيع المنتدى

لا توجد نقاشات بعد.

تُصنَّف الأعطال والنقاشات حسب الجيل: اختر جيلًا أعلاه لإضافة مشاركتك.

المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).