La densité du propergol dans le gonfleur de coussin gonflable peut être réduite en raison du cycle à haute température et de l’humidité dans le propergol et son récipient scellé. en cas d’accident, cela peut entraîner la libération de fragments de l’airbag avant du boîtier du générateur, augmentant ainsi le risque de blessure.
Safety Gate · الاتحاد الأوروبي · RappelConso · فرنسا23 أبريل 2024a12/01861/22سنوات الطراز 2002–2006معروض باللغة الأصلية (الفرنسية) · الترجمة قيد الانتظارعرض التفاصيل →
The density of the propellant in the airbag inflator may be reduced due to high temperature cycling and moisture in the propellant and its sealed container. In the event of an accident this can lead to the release of fragments of the front airbag from the generator housing, increasing the risk of injury.
Safety Gate · الاتحاد الأوروبي21 ديسمبر 2022A12/01861/22سنوات الطراز 2002–2006معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in localised thermal damage in the intake system, which might lead to engine power reduction and to increased risk of fire.
Safety Gate · الاتحاد الأوروبي30 مارس 2021A12/00444/21سنوات الطراز 2015–2018معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
The gas generator of the passenger airbag may be defective.This may result in uncontrolled inflation and release of metal fragments when the airbag is activated, causing injuries to the occupants.
Safety Gate · الاتحاد الأوروبي4 مارس 2020A12/00376/20سنوات الطراز 2001–2014معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
The ammonium nitrate propellant used in the airbag inflator may degrade over time due to propellant degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
Safety Gate · الاتحاد الأوروبي3 سبتمبر 2019A12/1334/19سنوات الطراز 2001–2011معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
The ammonium nitrate propellant used in the air bag inflator may degrade over time due to heat cycles and exposure to moisture. In the event of the airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the rider.
Safety Gate · الاتحاد الأوروبي13 نوفمبر 2018A12/1740/18سنوات الطراز 2001–2006معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits (ASICs) that are susceptible to internal shorting when exposed to high inductive electrical noise from various vehicle electrical components. If this occurs, there is a possibility that the ASIC could become damaged, leading to the airbag(s) and/or seat belt pretensioners being deactivated or deploying inadvertently.
Safety Gate · الاتحاد الأوروبي13 نوفمبر 2018A12/1739/18سنوات الطراز 2002–2006معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant and the possibility of a fire.
DVSA · المملكة المتحدة15 يونيو 2015R/2015/096سنوات الطراز 2003–2007معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant and the possibility of a fire.
DVSA · المملكة المتحدة17 أبريل 2013R/2013/048سنوات الطراز 2001–2003معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
It is possible that the splines of the extension shaft on vehicles equipped with Electric Motor assisted Power Steering (EMPS) may not have received the correct hardness treatment. This can cause the spline to distort and wear and eventually result in loss of steering.
DVSA · المملكة المتحدة3 ديسمبر 2012R/2012/145سنوات الطراز 2002–2008معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
It is possible that during the manufacturing process the wall thickness of the high pressure supply pipe may have been reduced. If the driving conditions of the vehicle cause fuel pressure fluctuations this could cause cracking and result in a fuel leak. Also due to gasket fatigue and prolonged usage the high pressure fuel pump check valve may be come loose and leak.
DVSA · المملكة المتحدة17 فبراير 2011R/2011/005سنوات الطراز 2000–2008معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
The crimping connector of the inflator cartridge may be incorrectly assembled with the curtain airbag on certain vehicles. In the event of airbag activation full deployment of the curtain shield cannot be guaranteed due to this condition.
DVSA · المملكة المتحدة26 أغسطس 2003R/2003/125سنوات الطراز 2003معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
There is a possibility that excessive residual stress remains on the check valve of the fuel pump during the assembly process. If the vehicle is driven with the residual stress the check valve may leak fuel.
DVSA · المملكة المتحدة11 يوليو 2002R/2002/099سنوات الطراز 2000–2001معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
Het aanwezige drijfgas in de airbagontsteker aan de bestuurderszijde kan in de loop van de tijd, door luchtvochtigheid en temperatuurwisselingen, afnemen in dichtheid en poederachtig worden.
rdw9 ديسمبر 2022MGP220467سنوات الطراز 2003–2006معروض باللغة الأصلية (الهولندية) · الترجمة قيد الانتظارعرض التفاصيل →
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).