Les modules de cellules des véhicules concernés n’ont pas été produits conformément aux spécifications, ce qui peut entraîner la défaillance du cadre du module. cela peut entraîner un arrêt du système à haute tension et un incendie.
Safety Gate · EU · RappelConso · Frankreich22. Jan. 2026sr/02913/25Modelljahre 2021–2024Im Original (Französisch) angezeigt · Übersetzung ausstehendDetails ansehen →
고전압배터리 셀 모듈의 제조과정 오류로 인해 고전압 배터리 셀 모듈 프레임의 압력판이 허용된 압력을 초과하여 압축되어 측면판과 용접되었을 수 있으며, 이런 경우 시간이 지남에 따라 고전압 배터리 셀 모듈 프레임의 압력판과 측면판 사이의 용접 이음새가 파손되어 고전압 배터리 셀간 정렬이 어긋나 사전 경고 없이 고전압이 차단될 수 있으며, 화재가 발생할 수 있는 가능성이 확인됨에 따른 리콜
<대상차량별 생산일자> BMW iX xDrive50: 2021.08.23~2023.05.08 BMW 750e xDrive: 2023.05.15~2023.08.31
The cell modules in the vehicles concerned were not produced in accordance with the specifications, which may cause the module frame to fail. This may lead to a shutdown of the high-voltage system and fire.
구동모터 내 브러시 모듈의 제조 또는 조립 과정에서 유입된 이물질로 인하여 브러시 모듈과 하우징 사이에 전도성 연결을 생성할 수 있으며, 이런 경우 전기 감전이나 화재 발생 위험이 없으나 고전압과 접지 사이의 절연저항 이상감지가 과도하게 작동되어 경고등 점등 및 중앙 모니터에 체크 컨트롤 메시지가 표시되고, 매우 드문 경우 차량이 운행 중 서서히 정지할 수 있는 가능성에 따른 리콜
<대상차량별 생산일자> BMW i4 eDrive40: 2021.11.23~2023.12.13 BMW i4 eDrive40: 2022.06.07 BMW i4 M50: 2021.11.22~2023.12.08 BMW i5 eDrive40: 2022.07.29~2023.12.13 BMW i5 M60 xDrive: 2023.06.27~2023.12.13 BMW i5 M60 xDrive: 2023.09.13 BMW i7 eDrive50: 2023.06.30~2023.12.11 BMW i7 M70 xDrive: 2023.07.28~2023.11.07 BMW i7 xDrive60: 2022.02.15~2023.12.11 BMW i7 xDrive60: 2023.11.29 BMW iX M60: 2022.03.29~2023.12.08 BMW iX xDrive40: 2021.08.02~2023.07.03 BMW iX xDrive40: 2023.02.10 BMW iX xDrive50: 2020.09.01~2023.12.12 BMW iX xDrive50: 2023.07.19 BMW iX1 xDrive30: 2022.11.08~2023.12.14
MOLIT · Südkorea21. Aug. 20255819Modelljahre 2021–2023Im Original (Koreanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BMW of North America, LLC (BMW) is recalling certain 2022-2025 i4, 2022-2024 IX, 2023-2024 I7, and 2024 I5 vehicles. The electric drive motor software may shut down the high-voltage system, causing a loss of drive power.
NHTSA · USA23. Juli 202525V395000Modelljahre 2022–2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BMW of North America, LLC (BMW) is recalling certain 2022-2025 IX, 2023-2024 I7, and 2022-2023 i4 vehicles. The high-voltage battery cell modules may not have been assembled properly, resulting in stress on the module frame and possible module failure.
NHTSA · USA16. Juli 202525V470000Modelljahre 2022–2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
The airbag control module (ACSM) may be defective, potentially preventing the airbags from deploying in the event of an accident. This increases the risk of injury to vehicle occupants. Additionally, the airbag warning light or Check Control message may not activate, leaving the driver unaware of the fault.
The driver airbag may be incorrectly folded. In the event of an accident it may consequently not be able to unfold correctly, increasing the risk of injury to the driver.
Issue: On certain vehicles, the driver-front airbag may not inflate correctly in a crash. Safety Risk: An airbag that does not inflate correctly could create an increased risk of injury in a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealership to replace the driver-front airbag.
Transport Canada14. Feb. 20232023061Modelljahre 2022–2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BMW of North America, LLC (BMW) is recalling certain 2022-2023 iX xDrive40, iX xDrive50, iX M60, i4 eDrive35, i4 eDrive40, i4 M50, and 2023 i7 xDrive60 vehicles. The high voltage battery electronic control unit (ECU) software may cause an interruption of electrical power.
배터리 셀 생산 공정 중에 손상된 음극판 조각이 배터리 셀 내부에 유입되어 고전압 배터리에 단락이 발생할 수 있고, 이로 인해 셀 모듈이 방전될 수 있으며 화재가 발생할 수 있는 가능성에 따른 리콜
<*대상차량별 생산일자> BMW i4 eDrive40: 2021.11.30~2022.07.15 BMW i4 M50: 2021.11.22~2022.06.08 BMW i7 xDrive60: 2022.08.04~2022.08.04 BMW iX M60: 2022.05.04~2022.05.09 BMW iX xDrive50: 2022.04.28~2022.06.01 ?
배터리 셀 생산 공정 중에 손상된 음극판 조각이 배터리 셀 내부에 유입되어 고전압 배터리에 단락이 발생할 수 있으며, 이런 경우 셀 모듈이 방전될 수 있고 화재가 발생할 수 있는 가능성에 따른 리콜
<*대상차량별 생산일자> BMW i4 eDrive40: 2022.02.10~2022.08.11 BMW i4 M50: 2022.04.25~2022.06.07 BMW i7 xDrive60: 2022.07.29 BMW iX xDrive50: 2021.09.20
배터리 셀 생산 공정 중에 손상된 음극판 조각이 배터리 셀 내부에 유입되어 고전압 배터리에 단락이 발생할 수 있으며, 이런 경우 셀 모듈이 방전될 수 있고, 화재가 발생할 수 있는 가능성에 따른 리콜
<*대상차량별 생산일자>
BMW i4 eDrive40: 2021.11.24~2022.06.01
BMW i4 M50: 2021.11.23~2022.06.23
BMW iX M60: 2022.03.30~2022.03.30
BMW iX xDrive50: 2021.12.17~2022.06.27?
MOLIT · Südkorea19. Aug. 20224451Modelljahre 2021–2022Im Original (Koreanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufKritischElektrikNABis zur Reparatur nicht fahren
BMW of North America, LLC (BMW) is recalling certain 2022-2023 iX xDrive50, iX M60, 2022 i4 eDrive40, and i4 M50 vehicles. The high voltage battery may have internal damage, resulting in an electrical short-circuit.
NHTSA · USA27. Juli 202222V541000Modelljahre 2022–2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Issue: On certain vehicles, the air bag control unit may not work properly due to a software error. As a result, the airbag warning light and warning messages may not turn on when there is a problem with the airbag system or the pedestrian protection system. Note: This recall replaces Transport Canada recall 2022-183. Vehicles that were repaired under that recall also require this repair. Safety Risk: An airbag system that does not work properly could increase the risk of injury in a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealership to update the airbag control unit software. To reduce the safety risk, BMW recommends that you should not transport any passengers until the recall repairs have been completed.
Transport Canada7. Juli 20222022364Modelljahre 2022–2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
This recall was replaced by Transport Canada Recall No. 2022-364. Issue: On certain vehicles, the air bag control unit may not work properly due to a software error. As a result, the airbag warning light and warning messages may not turn on when there is a problem with the airbag system or the pedestrian protection system. Safety Risk: An airbag system that does not work properly could increase the risk of injury in a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealership to update the airbag control unit software. To reduce the safety risk, BMW recommends that you should not transport any passengers until the recall repairs have been completed.
Transport Canada13. Apr. 20222022183Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On the vehicles concerned, the A-pillar panel holder may not be screwed in place according to specifications. Activation of the airbag, as well as causing the panel to separate, could lead to bending affecting the inflation behaviour of the airbag and, in a worst case scenario, damage the airbag, increasing the risk of injury.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).