These vehicles may not comply with c.M.V.S.S. 301 - fuel system integrity. Some welds in the left rear quarter panel may have been missed during assembly. In the event of a vehicle crash, the vehicle sheet metal structure may not perform as designed. This could result in unexpected damage to the fuel tank or fuel lines and leakage of fuel. If there is a fuel leak and an ignition source, a fire could occur. Correction: Dealers will inspect for missing welds and, if necessary, place three welds between the involved panels.
Transport Canada30. Okt. 19961996173Modelljahre 1997Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
During assembly of the left rear quarter panel, some welds were missed. This does not comply with the requirements of fmvss no. 301, "fuel system integrity."
These vehicles were constructed with welds in the rear compartment pan assembly that are not sufficient to comply with the requirements pertaining to fuel tank leakage in the event of a rear impact collision. The fuel tank assemblies do not comply with fmvss no. 301, "fuel system integrity."
NHTSA · USA1. Juli 199494V122000Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Front fuel feed hose assembly could crack or separate at the coupling on the engine end of the hose assembly, allowing fuel to leak into the engine compartment.
Vehicles may have improperly torqued connections of the front fuel feed/return hoses to the fuel pipes at the body rail. A fitting may loosen enough to leak fuel into the underhood area, and, in the presence of an ignition source, a fire could result. Correction: Front fuel feed/return hose fittings will be properly torqued.
Transport Canada11. Juni 19901990083Modelljahre 1990Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On vehicles with quad 4 engines, the front fuel feed assembly could crack or separate at the coupling on the engine end of the assembly, allowing fuel to leak into the underhood area. This would create the possibility of an engine compartment fire. Correction: Front fuel feed hose assembly will be replaced on affected vehicles.
Transport Canada7. März 19901990043Modelljahre 1988–1989Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Front fuel feed hose assembly could crack or separate at the coupling on the engine end of the hose assembly, allowing fuel to leak into the engine compartment.
NHTSA · USA5. März 199090V042000Modelljahre 1988–1989Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Das Kraftstoffsystem kann an der Verbindung der Gasklappeneinspritzung und der Kraftstoffzufuhrleitung undicht werden. Folge des Defekts: Dieses Leck könnte zu einem Brand unter der Motorhaube führen, der sich auf den Fahrgastraum ausbreitet und Verbrennungen bei den Insassen verursacht.
Under certaain conditions, the hose clamps on the fuel tank filler pipe and fuel tank filler vent pipe could fracture. The fracture of these clamps could cause fuel leakage at any of the four pipe to hose connections. Leakage can occur during refueling, or while driving, if the fuel tank is above 3/4 full.
NHTSA · USA8. März 198282V021000Modelljahre 1982Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
These vehicles do not comply with c.M.V.S.S. 301 - fuel system integrity. Rear compartment pan welds may not meet manufacturing standards. Correction: Dealers are to install rivets adjacent to the locations where suspect welds may have occurred.
Transport Canada20. Juli 19941994117Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
The vehicles were assembled with an incorrect suspension upper spring seat at the right-rear position. If the vehicle is involved in a rear impact accident, the right-hand rear wheel house flange could sever the fuel tank filler pipe and spill fuel.
NHTSA · USA17. Juli 199292V106000Modelljahre 1992Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Note: Vehicles equipped with 2.3 litre engine. In sub zero temperatures, moisture from the crankcase ventilation system could cause ice buildup behind the throttle blade thereby preventing the throttle from returning to idle when the accerator pedal is released. This could result in loss of vehicle control. Correction: An engine ventilation kit will be installed on affected vehicles to prevent moisture accumulation in the crankcase.
Transport Canada12. Dez. 19911991174Modelljahre 1988Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Certain vehicles may not comply with CMVSS 1103 - Exhaust Emissions. Cracks may develop in the casing of the integrated direct ignition coil. Correction: Ignition coils will be inspected and replaced if necessary.
Transport Canada5. März 19911991037Modelljahre 1988–1990Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
These vehicles do not comply with c.M.V.S.S. 1103 - exhaust emissions. - mass airflow sensor failure - note : Vehicles with 3.0 litre and 3.8 litre engines.
Transport Canada27. Jan. 19871987007Modelljahre 1987Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Fuel hoses may be incorrectly positioned and contact the right front drive axle boot during vehicle operation. After a period of time, the rotating boot could wear a hole in the fuel hose, resulting in fule leakage.
These vehicles do not comply with c.M.V.S.S. 1101 - emission device. Unilingual unleaded fuel label.
Transport Canada29. Sept. 19891989139Modelljahre 1989Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).