Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Cadillac CT6

2016– · 2 generationen · 1 dokumentierte Mängel · 3 Märkte
Generationen

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
MarktAlleNA
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This service bulletin provides diagnostic repair information to correct an oil leak in the engine.

NHTSA · Herstellerbulletin11019543Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This service bulletin provides diagnostic repair information to correct an oil leak on top of the engine that may be coming from cam carrier- T-joint area.

NHTSA · Herstellerbulletin11012183Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This Preliminary information communicates the possibility of a engine oil leak that may occur at the cam carrier gasket T joint area due to improper amount of sealer be applied

NHTSA · Herstellerbulletin10181178Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This engineering Information (EI) ends the need for information from the field for a condition of oil leaking from the valve rocker arm oil control valve. If a vehicle is encountered with this condition, refer to SI for further diagnosis.

NHTSA · Herstellerbulletin10173419Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This Preliminary information communicates to the dealer an issue where the vehicle's engine may crank over unprompted andnot start afterward. This is the result of hooking up the Active Fuel Injector Tool incorrectly on vehicles equipped with a direct fuel injection system. This Preliminary information instructs the dealer ofa repair kit they received that will prevent this issue when installed correctly.

NHTSA · Herstellerbulletin10160690Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This engineering information PI ends the need for information from the field on a oil leak from the oil pan.

NHTSA · Herstellerbulletin10158870Modelljahre 2018Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This engineering information PI ends the need for information from the field on a oil leak from the oil pan.

NHTSA · Herstellerbulletin10158871Modelljahre 2018Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This technical bulletin provides a procedure to install an oil pump if found the cause of the noise from the engine area.

NHTSA · Herstellerbulletin10158824Modelljahre 2016–2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

17288-Service Update. Certain vehicles were shipped without fuel labels that recommend the customer use premium fuel rather than regular fuel. Dealers are to install the labels.

NHTSA · Herstellerbulletin10156986Modelljahre 2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detectortools.

NHTSA · Herstellerbulletin10154552Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation.

NHTSA · Herstellerbulletin10147348Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon and may also have an oil or coolant leak. Technician may find coolant or oil in a spark plug tube. If the Spark Plug Tube is leaking and it is determined that the oil or coolant is not coming from a leak above the spark plug then replace the cylinder Head, spark plug and coil.

NHTSA · Herstellerbulletin10144454Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.

NHTSA · Herstellerbulletin10144451Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This Preliminary information communicates to the dealer an issue where the vehicle's engine may crank over unprompted and not start afterward. This is the result of hooking up the Active Fuel Injector Tool incorrectly on vehicles equipped with a direct fuel injection system. This Preliminary information instructs the dealer ofa repair kit they received that will prevent this issue when installed correctly.

NHTSA · Herstellerbulletin10141364Modelljahre 2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This engineering informational bulletin is requesting information from the field on vehicles that have the condition of Oil Leak Between Upper and Lower Oil Pan.

NHTSA · Herstellerbulletin10138099Modelljahre 2016–2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This informational bulletin advises the possible concerns that can happen when using a stop leak additive in the cooling system.

NHTSA · Herstellerbulletin10138018Modelljahre 2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.

NHTSA · Herstellerbulletin10137727Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This engineering informational bulletin is ending the need for information from the field on vehicles that have the condition of Oil Leak Between Upper and Lower Oil Pan.

NHTSA · Herstellerbulletin10137686Modelljahre 2016–2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon and may also have an oil or coolant leak. Technician may find coolant or oil in a spark plug tube. If the Spark Plug Tube is leaking and it is determined that the oil or coolant is not coming from a leak above the spark plug then replace the cylinder Head, spark plug and coil.

NHTSA · Herstellerbulletin10129900Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This Preliminary Information communication provides information to the technician to help determine if the vehicle is equipped with factory or aftermarket Compressed Natural Gas, Liquefied Petroleum Gas, or Bi-Fuel Systems. Technician will check for the Vehicle Emission Control Information Label. By using the engine Regular Production Option Code as well as the Vehicle Emission Control Information Label, technician can confirm the vehicle has a factory installed alternative fuel system or who the manufacturer is of the aftermarket fuel system.

NHTSA · Herstellerbulletin10127230Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

46310 - Service Update Bulletin. The incorrect upper radiator hose may have been installed during assembly between vehicles equipped with LGX Engines and LGW Engines. Both of these engines have unique upper radiator hoses, and interchanging them may create hose interference with the Air Box, eventually resulting in a coolant leak.

NHTSA · Herstellerbulletin10126155Modelljahre 2016–2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

49270 - Customer Satisfaction. Certain vehicles, may have a condition in which engine oil may leak into the engine coolant from within the engine oil cooler core. Engine oil in the coolant system may lead to an over-temperature condition. Dealers will inspect the manufacture date of the engine oil cooler and for presence of engine oil in the engine coolant reservoir. The dealer will replace the engine oil cooler if necessary. In rare occurrences, engine replacement may be required.

NHTSA · Herstellerbulletin10126138Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

49560 - Service Update. An incorrect bolt installed on an engine ground may cause a vehicle to shut down while driving, with no restart. Dealers will inspect and, if necessary, replace a ground bolt.

NHTSA · Herstellerbulletin10118996Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane levels greater than 91, Refrain from extended idleing periods if possible, park vehicles in covered garage.Replacing the fuel pump will not repare this concern.

NHTSA · Herstellerbulletin10118290Modelljahre 2016–2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
CT6 I · 2016–2023
BulletinMittelMotorNA

Bulletin

This Preliminary Information communication provides information to the technician about engine block that have a possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, an out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.

NHTSA · Herstellerbulletin10114831Modelljahre 2016–2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).