Bulletin
This service bulletin provides diagnostic repair information to correct an oil leak in the engine.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Cadillac CT6 (alle generationen) erhalten
Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
This service bulletin provides diagnostic repair information to correct an oil leak in the engine.
This service bulletin provides diagnostic repair information to correct an oil leak on top of the engine that may be coming from cam carrier- T-joint area.
This Preliminary information communicates the possibility of the engine running hot or overheating with no DTC's due to inaccuratecoolant temperature sensor located on the coolant pump outlet pipe.
This Preliminary information communicates the possibility of a engine oil leak that may occur at the cam carrier gasket T joint area due to improper amount of sealer be applied
This Technical bulletin provides a service procedure for dealers/technicians on installation of Radio Software Version U148 Over-the-Air Update.
Customer Satisfaction Program - Certain 2019 model year Cadillac CT6 and CT6-V vehicles equipped with the Brake Lining Wear System Life Span Prognostic Indicator, (RPO JBP), may have a condition in which the software calculation that is reported to the driver?s information center may be 16X faster than what the brake pads are actually experiencing. Dealers will reprogram the brake system control module (BSCM) and if necessary, replace the brake pads.
This engineering Information (EI) ends the need for information from the field for a condition of oil leaking from the valve rocker arm oil control valve. If a vehicle is encountered with this condition, refer to SI for further diagnosis.
Customer Satisfaction Program - Certain vehicles may have a condition in which the customer experiences a service engine soonlight and a rough engine idle due to chafing of an engine wiring harness. Dealers are to install a protective conduit on the engine harness.
N192282430 - Service Update. Certain vehicles may have a condition where after multiple start/stop events in a row, an electronically controlled transmission shift to neutral may occur upon a change of mind auto stop/start event. Multiple start/stop events in a row may cause the intake manifold temperature to creep over 40C. Hot intake manifold temperatures and an extremely retarded spark can aggravate a false positive stall condition, resulting in the default shift to neutral remedial action. Dealers will reprogram the ECM.
This Technical bulletin provides a service procedure for dealers/technicians on installation of Radio Software Version U148 Over-the-Air Update.
Certain 2019 model year Cadillac CT6 vehicles equipped with the Brake Lining Wear System Life Span Prognostic Indicator, (RPO JBP), may have a condition in which the software calculation that is reported to the driver?s information center may be 16X faster than what the brake pads are actually experiencing. Dealers will reprogram the brake system control module (BSCM) and if necessary, replace the brake pads.
N192264450-01 - Customer Satisfaction Program - Certain 2019 model year Cadillac CT6 vehicles equipped with the Brake Lining Wear System Life Span Prognostic Indicator, (RPO JBP), may have a condition in which the software calculation that is reported to the driver?s information center may be 16X faster than what the brake pads are actually experiencing. Dealers will reprogram the brake system control module (BSCM) and if necessary, replace the brake pads.
N192264450-02 - Customer Satisfaction Program - Certain 2019 model year Cadillac CT6 vehicles equipped with the Brake Lining Wear System Life Span Prognostic Indicator, (RPO JBP), may have a condition in which the software calculation that is reported to the driver?s information center may be 16X faster than what the brake pads are actually experiencing. Dealers will reprogram the brake system control module (BSCM) and if necessary, replace the brake pads.
This Technical bulletin provides a procedure for dealers/technicians to correct a condition of a Premature Replace Brake Pads or Service Brake Pad Life System Message at very Low Mileage.
N192256400 - Service Update. Certain vehicles may have the E-boost brake pipe(s) contacting the main body wiring harness in the under-hood compartment. A brake pipe contact to the wire harness may cause wear to the brake pipe abrasion sleeve, potentially resulting in the pipe coating experiencing wear and exposing the pipe to additional corrosion. Dealers are to add sumi wraps to the E-boost pipes.
This Preliminary information communicates that on 2016 -2017 model year vehicles equipped with 19 or 20 inch wheels that the front park assist may indicate an object when in reverse with the steering turned at or near lock is a normal Operational Characteristic and no repair attempts should be made.
This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians shouldrefer to Service Information for information regarding most accessories. Technicians mayalso contact PARTECHand/orthe Techline Customer Support Center for additional support.
N192208990 - Service Update. Certain vehicles may have a condition where the brake lines need to be inspected. In a rare instance, the brake lines could be rubbing on the steering shaft. Dealers are to inspect and replace brake lines or clip if necessary.
This Technical bulletin provides a procedure for dealers/technicians to correct a condition of a Premature Replace Brake Pads or Service Brake Pad Life System Message at very Low Mileage.
N192210460-01 - Service Update - Certain 2019 Cadillac CT6 equipped with engine RPO?s LSY or LTA, Chevrolet Silverado 1500 (New Model), and GMC Sierra 1500 (New Model) vehicles have a condition where the brake system control module (BSCM) may cause a service brake assist message to appear on the driver?s information center (DIC), and a service engine soon light to illuminate on the dashboard. This may cause the brake pedal feel to be different. The pedal travel will increase for normal/light braking applies. This is caused by a software issue where the motor position sensors do not correlate. Dealers will reflash the BSCM with updated software.
This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians shouldrefer to Service Information for information regarding most accessories. Technicians mayalso contact Partechand/orthe Techline Customer Support Center for additional support.
This Preliminary information communicates that on 2016 -2017 model year vehicles equipped with 20 inch wheels that the front park assist may indicate an object when in reverse with the steering turned at or near lock is a normal Operational Characteristic and no repair attempts should be made.
This Preliminary information communicates that on 2016 -2017 model year vehicles equipped with 19 or 20 inch wheels that the front park assist may indicate an object when in reverse with the steering turned at or near lock is a normal Operational Characteristic and no repair attempts should be made.
This technical bulletin provides a procedure to rebuild the transmission and install a snap ring retainer to eliminate the 1-3 clutch spring ring from coming out of the ring groove.
This technical bulletin provides a procedure to remove grease and install BRS tape to the spacers for the seat frame to eliminate a squeak type noise.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).