브레이크 오일 리저버 탱크 캡에서 대기압을 유지하기 위한 공기통로의 불량으로 브레이크 오일 리저버 탱크 내부의 대기압 유지가 제대로 되지 않아 진공이 형성될 수 있으며, 이런 경우 브레이크 페달 작동 시 운전자가 평상시보다 더 깊이 페달을 밟아야 제동력을 얻을 수 있거나, 최악의 경우 제동력이 상실하여 사고가 발생할 수 있는 가능성에 따른 리콜 (* 브레이크 오일 경고등(Brake fluid level low)이 점등된 경우 운행을 즉시 멈추시고, 가까운 페라리 서비스센터에 연락하셔서 견인 하여 주시기 바랍니다.)
<*대상차량별 생산일자> 페라리 458 이탈리아: 2010.05.27~2014.08.29 페라리 458 Spider: 2012.02.15~2014.09.13 페라리 458 Speciale: 2014.02.25~2015.09.09 페라리 458 Speciale A: 2015.04.21~2015.07.21 페라리 488 GTB: 2015.10.30~2018.05.08 페라리 488 Spider: 2016.01.25~2019.06.01
MOLIT · Südkorea28. März 20224273Modelljahre 2010–2016Im Original (Koreanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ferrari North America, Inc. (Ferrari) is recalling certain 2010-2015 458 Italia, 2012-2015 458 Spider, 2014-2015 458 Speciale, 2015 458 Speciale Aperta, 2016-2019 488 GTB, and 488 Spider vehicles. The brake system may leak brake fluid, resulting in a loss of braking ability.
Ferrari North America, Inc. (Ferrari) is recalling certain 2009-2011 California and 2010-2011 458 Italia vehicles equipped with non-desiccated, passenger frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Ferrari North America (Ferrari) is recalling certain 2014 Ferrari California, 2014-2015 Ferrari 458 Italia, 458 Spider, 2014-2016 Ferrari FF, 2014-2017 Ferrari F12, 2015-2018 Ferrari California T, 2015 Ferrari 458 Speciale A, 2016 Ferrari F60 America, 2016-2017 Ferrari F12 tdf, 2016-2018 Ferrari 488 GTB, 488 Spider, 2017-2018 Ferrari GTC4Lusso and 2018 GTC4Lusso T vehicles nationwide. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Ferrari North America, Inc. (Ferrari) is recalling certain 2012 Ferrari California, 458 Italia, 458 Spider, and FF vehicles that have not already had their passenger frontal air bag replaced. These passenger frontal air bag modules have air bag inflators that may explode in the event of a crash due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
NHTSA · USA7. Juni 201818V381000Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ferrari North America, Inc. (Ferrari) is recalling certain 2009-2011 Ferrari California, and 2010-2011 Ferrari 458 Italia vehicles that have not had their passenger frontal air bag replaced. These passenger frontal air bag modules have air bag inflators that may explode in the event of a crash due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
NHTSA · USA23. März 201818V188000Modelljahre 2010–2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On January 9, 2018 Ferrari North America, Inc. (Ferrari) recalled 1,073 model year 2013 California, 458 Italia, 458 Spider, FF, and F12 Berlinetta vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands. On May 18, 2018, Ferrari expanded the recall to include an additional 826 model year 2013 California, 458 Italia, 458 Spider, FF, and F12 Berlinetta vehicles located throughout the rest of the United States. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Due to a non conformity during production the passenger's front air bag inflator may rupture during deployment. This may cause metal fragments to pass through the air bag and into the vehicle interior at high speed which may result in injury or death to vehicle occupants.
DVSA · Vereinigtes Königreich31. Mai 2016R/2016/115Modelljahre 2008–2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ferrari North America, Inc. (Ferrari) is recalling certain model year 2009-2011 Ferrari California vehicles manufactured February 16, 2009, to July 8, 2011, and model year 2010-2011 458 Italia vehicles manufactured March 5, 2010, to July 29, 2011. These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules, used as original equipment or replacement equipment. In the event of a crash necessitating air bag deployment, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
NHTSA · USA23. Mai 201616V341000Modelljahre 2010–2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
The driver's airbag module may not conform to the required specifications. In the event of a collision this may cause the airbag to deploy incorrectly and t may not offer the appropriate degree of protection for the driver
DVSA · Vereinigtes Königreich13. Juli 2015R/2015/148Modelljahre 2014–2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ferrari North America, Inc. (Ferrari) is recalling certain model year 2010-2014 F458 Italia and F458 Spider vehicles manufactured March 5, 2010, to May 20, 2013. In the affected vehicles, the secondary latch for the front trunk storage compartment may not release when the vehicle is stationary. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 401, "Interior Trunk Release."
NHTSA · USA7. Aug. 201414V487000Modelljahre 2010–2014Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Due to a non-confornity in the assembly of the rear wheelhouse/innerwing and its heat shield it is possible that the assembly to deform under high ambient and operating temperatures. This could result in overheating of the adhesive used to secure the heat shield and in extreme cases it could cause the adhesive to ignite and result in a vehicle fire.
Ferrari is recalling certain model year 2010 458 italia vehicles. The heat created by the engine could cause possible deformation of the rear right hand and left hand wheelhouse and heat shield assemblies. The assembly could come excessively close to the exhaust system causing the bonding adhesive used in the assembly to overheat and produce smoke.
Le bouchon du réservoir de liquide de frein peut ne pas être en mesure d’assurer une ventilation adéquate permettant de maintenir la pression atmosphérique à l’intérieur du réservoir lui-même. cela peut entraîner la perte d’une partie ou de la totalité de sa capacité de freinage, ce qui augmente le risque d’accident.
Safety Gate · EU · RappelConso · Frankreich25. März 2022a12/00470/22Modelljahre 2009–2016Im Original (Französisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Der Deckel des Bremsflüssigkeitsbehälters kann luftdicht abschließen, wodurch im Bremssystem ein Unterdruck entsteht. Außerdem kann die Warnmeldung bei zu niedrigem Bremsflüssigkeitsstand die beabsichtigte Information nicht liefern.
rdw8. März 2022MGP220095Modelljahre 2010–2016Automatisch übersetzt · Original: NiederländischDetails ansehen →
Der Deckel des Bremsflüssigkeitsbehälters kann möglicherweise keine ausreichende Belüftung gewährleisten, um den Atmosphärendruck im Behälter selbst aufrechtzuerhalten.�
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).