Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Aufleuchten der Airbag-Warnleuchte
Kunden können ein Aufleuchten der Fehleranzeigelampe (Malfunction Indicator Lamp, MIL) feststellen. Bei weiterer Untersuchung stellt der Techniker möglicherweise fest, dass einer oder mehrere der folgenden Diagnostic Trouble Codes (DTCs) gesetzt wurden: ? B0050-1D - Gurtschalter Fahrerseite vorne - Außerhalb des Bereichs (aktiv oder gespeichert). ? B0050-13 - Gurtschalter Fahrerseite vorne - Stromkreis unterbrochen (aktiv oder gespeichert). Diese Information betrifft den Austausch des Inline-Sitzsteckers.
Airbag-Warnleuchte leuchtet
Kunden können feststellen, dass die Malfunction Indicator Lamp (MIL) leuchtet. Bei weiterer Untersuchung stellt der Techniker möglicherweise fest, dass einer oder mehrere der folgenden Diagnose-Fehlercodes (DTCs) gespeichert wurden: ? /B0050-1D - Fahrer-Vorderseite Gurtschloss-Schalter - außerhalb des Bereichs (aktiv oder gespeichert). ? B0050-13 - Fahrer-Vorderseite Gurtschloss-Schalter - Stromkreisunterbrechung (aktiv oder gespeichert). Diese Mitteilung betrifft den Austausch des Inline-Sitzsteckers.
Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
Front Brake Squeak/Squeal Noise This bulletin involves cleaning excessive sealant from the front brake caliper adaptor brackets and replacing the adaptor bracket mounting bolts and/or replacing the front brake pads and related hardware. The customer may describe one or more of the front brake squeak/squeal noise symptoms/conditions: ? Squeak/squeal noise during moderate brake apply combined with light steering. The noise typically occurs with warm brakes after several brake applications. ? Squeak/squeal noise during low speed brake apply with vehicle moving forward or reverse. The noise typically only occurs after the vehicle sits overnight in colder ambient temperatures and the noise will go away after a few brake applications.
Flash: Vehicle Will Not Shift Out Of Park This bulletin involves reprogramming the Electronic Shift Module (ESM) with the latest available software. Some Customers may experience a condition where the vehicle will not shift out of park while the engine running at idle and brake pedal applied. Cycling the ignition key off and restarting the engine will allow shift. Technicians may find DTC P0606-00 Control Module Processor. Flashing the ESM with the latest software will correct this concern.
Front Brake Squeak/Squeal Noise This bulletin involves cleaning excessive sealant from the front brake caliper adaptor brackets and replacing the adaptor bracket mounting bolts and/or replacing the front brake pads and related hardware. The customer may describe one or more of the front brake squeak/squeal noise symptoms/conditions: ? Squeak/squeal noise during moderate brake apply combined with light steering. The noise typically occurs with warm brakes after several brake applications. ? Squeak/squeal noise during low speed brake apply with vehicle moving forward or reverse. The noise typically only occurs after the vehicle sits overnight in colder ambient temperatures and the noise will go away after a few brake applications.
Flash: Vehicle Will Not Shift Out Of Park This bulletin involves reprogramming the Electronic Shift Module (ESM) with the latest available software. Some Customers may experience a condition where the vehicle will not shift out of park while the engine running at idle and brake pedal applied. Cycling the ignition key off and restarting the engine will allow shift. Technicians may find DTC P0606-00 Control Module Processor. Flashing the ESM with the latest software will correct this concern.
SEAL, Input If looking to replace stubshaft due to ATX fluid leaking, do not replace PTU seals. None of the seals from the PTU side will need to be replaced whenever the ATX stubshaftis replaced, even though V-seal (68408748A$) is in direct contact with the stubshaft,it will not avoid grease/oil leakage from transmission side. PTU V-seals are intended to act as a dust cover for stubshaft-PTU input shaft spline interface. PTU Input shaft seal (68408749A$) is intended to hold PTU oil and debris ingress; it should be replaced only if the fluid leakage is confirmed to be PTU oil and not ATX trans. fluid.
Inoperative Blue And Me Steering Wheel Button This bulletin involves performing a Body Control Module (BCM) Proxi Configuration. The customer may notice that the buttons on the steering wheel for Blue and Me may stop working. Also for customers in Canada and Mexico, they may notice that the Tire Pressure Monitor System (TPMS) ?Winter Mode? feature is missing.
Flash: Vehicle Will Not Shift Out Of Park This bulletin involves reprogramming the Electronic Shift Module (ESM) with the latest available software. Some Customers may experience a condition where the vehicle will not shift out of park while the engine running at idle and brake pedal applied. Cycling the ignition key off and restarting the engine will allow shift. Technicians may find DTC P0606-00 Control Module Processor. Flashing the ESM with the latest software will correct this concern.
Front Brake Squeak/Squeal Noise This bulletin involves cleaning excessive sealant from the front brake caliper adaptor brackets and replacing the adaptor bracket mounting bolts and/or replacing the front brake pads and related hardware. The customer may describe one or more of the front brake squeak/squeal noise symptoms/conditions: ? Squeak/squeal noise during moderate brake apply combined with light steering. The noise typically occurs with warm brakes after several brake applications. ? Squeak/squeal noise during low speed brake apply with vehicle moving forward or reverse. The noise typically only occurs after the vehicle sits overnight in colder ambient temperatures and the noise will go away after a few brake applications.
Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a crank no start condition in extreme cold temperatures of -4F (-20C) partially due to the available fuel blend conditions, They may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that Diagnostic Trouble Code P0141 - O2 SENSOR 1/2 HEATER PERFORMANCE has been set in the PCM.
Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a crank no start condition in extreme cold temperatures of -4F (-20C) partially due to the available fuel blend conditions, They may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that Diagnostic Trouble Code P0141 - O2 SENSOR 1/2 HEATER PERFORMANCE has been set in the PCM.
Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a crank no start condition in extreme cold temperatures of -4F (-20C) partially due to the available fuel blend conditions. They may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that Diagnostic Trouble Code P0141 - O2 SENSOR 1/2 HEATER PERFORMANCE has been set in the PCM. Additional DTC Diagnostic Improvements: ? P1046 - Cylinder 1 Oil Supply Solenoid Valve Overcurrent. ? P1048 - Cylinder 2 Oil Supply Solenoid Valve Overcurrent. ? P104A - Cylinder 3 Oil Supply Solenoid Valve Overcurrent. ? P104C - Cylinder 4 Oil Supply Solenoid Valve Overcurrent.
Antenna Mast Will Not Screw Into Base This bulletin involves inspecting and installing the correct antenna mast, if required. The dealer may not be able to install the antenna mast to the antenna base. The mast may have the incorrect thread pitch (1.0 mm) and will not screw into the base. The mast should have a thread pitch of 0.8 mm.
Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience one of the following conditions or a a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find a Diagnostic Trouble Code has been set in the PCM. ? P0141 - O2 Sensor 1/2 Heater Performance. ? Crank no start condition in extreme cold temperatures of -4F (-20C) partially due to the available fuel blend conditions. Additional Software Improvements Include: ? P1046 - Cylinder 1 Oil Supply Solenoid Valve Overcurrent. ? P1048 - Cylinder 2 Oil Supply Solenoid Valve Overcurrent. ? P104A - Cylinder 3 Oil Supply Solenoid Valve Overcurrent. ? P104C - Cylinder 4 Oil Supply Solenoid Valve Overcurrent.
Inoperative Blue And Me Steering Wheel Button This bulletin involves performing a BCM Proxi Configuration. The customer may notice that the buttons on the steering wheel for Blue and Me may stop working. Also for customers in Canada and Mexico, they may notice that the Tire Pressure Monitor System (TPMS) ?Winter Mode? feature is missing.
RA4 Radio Enhancements This bulletin involves upgrading the software on the RA4 Radio. The customer may experience one or more of the following: ? Travel Link soft key missing (U.S. only). ? Weather map now available for SXM (U.S. only). ? Cannot select different map displays. ? Point Of Interest (POI) cannot be added as waypoints. ? Conference calls may not display all active callers. ? Improve iPod response time, to start playing audio. ? Browsing knob inoperative after exiting Short Message Service (SMS). ? ?Where Am I? feature inoperative while driving. ? When using iPod touch, the incorrect song name may be displayed. ? May not display Auto Park Brake menu, if equipped. ? Cannot create a new SMS, using phone numbers. ? Display the correct message, when in service mode. ? Poor or no audio from the radio, also radio controls may not respond. On further inspection the technician my find DTC B223B-00 Vehicle Configuration Mismatch. ? False error message while in service brake mode. ? Personal setting lost after key cycle, dynamic guidelines and Show Time bar. IMPROVEMENTS ? Display Travel Link soft key on more of the display screens (U.S. only). ? Display the correct media screen when using iPod touch. ? Improve screen layouts during media playback. ? Improved SMS screen displays. ? Correctly display speed lockout messages. ? Color improvements on navigation map. ? Improved chime warning volumes. ? Browsing improvements for Bluetooth audio. ? Improved conference call handling. ? Improved Voice Recognition (VR) commands for AM radio request.
Electronic Power Steering System (EPS) Instrument Cluster Lamp ON This bulletin involves reprogramming the Electric Power Steering (EPS) module with the latest available software to correct an erroneous EPS lamp illumination. The customer may describe the Power Steering System Warning lamp is illuminated on the instrument cluster. Upon further inspection, the technician may find the following Diagnostic Trouble Code (DTC): C1214-87 Conf Data Code Request Message - Missing Message error set in the EPS control unit.
Flash: 1.4L Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set: P1128-00 - Closed Loop Fueling Not Achieved - Bank 1 Upstream. P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled (Sales Code EAF only). P1607-00 - PCM Internal Shutdown Timer Rationality (Sales Code EAB only). P2610-00 - PCM Internal Engine Off Timer Performance (Sales Code EAB only). P1239-00 - Engine Oil Temperature Too Low (Sales Code EAB only). P0298-00 - Engine Oil Temperature Too High (Sales Code EAB only). P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. P0456-00 - Evap System Small Leak. Some customers may also experience the following conditions: Intermittent fast crank condition. Cranks as if no compression. Intermittent crank - no start condition. In addition, the following software enhancement is available: ** Scan tool enhancements to communicate with wiTECH to read DTCs descriptions for 2013 MY vehicles equipped with manual transmissions (Sales Code DDF) and Euro 4 Emission W/OBD (Sales Code NB4).** Improved reverse lamp activation time.
Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).