Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Honda Accord VI

1998–2002 · 21 dokumentierte Mängel · 1 Märkte

Diese Akte sammelt die bekannten Mängel des Honda Accord VI, verfasst und belegt von der Community. Lesen ist frei; mit einem kostenlosen Konto kannst du beitragen. Ein Mangel erhält das Siegel, sobald genug angesehene Mitwirkende ihn bestätigt haben.

Halter melden bei diesem Auto häufig Probleme mit airbags (1014 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen
Halter melden bei diesem Auto häufig Probleme mit electrical system (945 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen

Schwerwiegendste Mängel

Alle ansehen (21) →
m
KritischInnenraumNA

Airbags: problems reported by owners

1,014 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1998–2001), typically at around 83,000 miles. Most often named: frontal:sensor/control module (17%), frontal (15%). Reported consequences: 222 crashes, 2 fires, 185 injuries, 5 deaths.

✓ Mecafile-Auswertung amtlicher Daten1998–2001Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
m
KritischMotorNA

Accelerator and cruise control: problems reported by owners

239 owners in the United States reported problems with the accelerator and cruise control of this car to NHTSA (model years 1998–2001), typically at around 60,000 miles. Most often named: accelerator pedal (29%). Reported consequences: 89 crashes, 37 injuries, 1 death.

✓ Mecafile-Auswertung amtlicher Daten1998–2001Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
m
KritischBremsenNA

Brakes: problems reported by owners

191 owners in the United States reported problems with the brakes of this car to NHTSA (model years 1998–2001), typically at around 69,000 miles. Most often named: antilock/traction control/electronic limited slip (23%), foundation components (16%). Reported consequences: 47 crashes, 23 injuries.

✓ Mecafile-Auswertung amtlicher Daten1998–2001Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Neueste Rückrufe

Alle ansehen (45) →
RückrufMittelInnenraumEU

Kraftfahrzeuge – Karosserie (Schutzmittel für Insassen)

Das Gasgenerator-Modul des Fahrerairbags kann übermäßigen Druck aufbauen. Wird der Airbag ausgelöst, kann der Innendruck dazu führen, dass das Gasgenerator-Modul aufreißt. Metallsplitter können dabei weggeschleudert werden und möglicherweise die Insassen verletzen.

rdw15. Dez. 2025MGP250449Modelljahre 2002Automatisch übersetzt · Original: NiederländischDetails ansehen →
RückrufKritischInnenraumEU

The airbag inflators may be defective and may create excessive internal pressure in the event of…

The airbag inflators may be defective and may create excessive internal pressure in the event of activation.As a result, the metal inflator casing may rupture, causing metal fragments to be propelled through the airbag and into the passenger compartment, injuring the vehicle occupants.

Safety Gate · EU31. März 2020A12/00544/20Modelljahre 1998–2000Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelInnenraumEU

Kraftfahrzeuge - Karosserie (Insassenschutzmittel)

Die Airbag-Gasgeneratoren wurden ohne die richtigen Dichtungen hergestellt, sodass über einen längeren Zeitraum Luft und Feuchtigkeit in die Gasgeneratoren eindringen können. Dadurch verschlechtert sich die Qualität des Treibmittels.

rdw16. März 2020MGP200112Modelljahre 1998–2001Automatisch übersetzt · Original: NiederländischDetails ansehen →

Neueste technische Bulletins

Alle ansehen (105) →
BulletinMittelInnenraumNA

Bulletin

Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.

NHTSA · Herstellerbulletin10108755Modelljahre 2001Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelInnenraumNA

Bulletin

Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.

NHTSA · Herstellerbulletin10108734Modelljahre 2001Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Ordering replacement pcm's (v6). *nm

NHTSA · Herstellerbulletin10014204Modelljahre 2000Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).