Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
This bulletin provides general high-voltage safety precautions for the hybrid system. The hybrid system circuits operate with up to 650 volts. These high voltages are dangerous and can cause severe personal injuries, burns, and electrical shock if proper safety precautions are NOT followed. Be sure to carefully review all applicable Repair Manual procedures BEFORE performing service.
LSB: This bulletin provides general high-voltage safety precautions for the hybrid system. The hybrid system circuits operate with up to 650 volts. These high voltages are dangerous and can cause severe personal injuries, burns, and electrical shock if proper safety precautions are NOT followed. Be sure to carefully review all applicable Repair Manual procedures BEFORE performing service.
TSB: This bulletin provides general high-voltage safety precautions for the hybrid system. The hybrid system circuits operate with up to 650 volts. These high voltages are dangerous and can cause severe personal injuries, burns, and electrical shock if proper safety precautions are NOT followed. Be sure to carefully review all applicable Repair Manual procedures BEFORE performing service.
Lsb: This bulletin provides general high-voltage safety precautions for the hybrid system. The hybrid system circuits operate with up to 650 volts. These high voltages are dangerous and can cause severe personal injuries, burns, and electrical shock if proper safety precautions are not followed. Be sure to carefully review all applicable repair manual procedures before performing service.
Das Fahrzeug lässt sich nicht starten bzw. nicht in den Betriebsbereitschaftszustand („Ready-on") versetzen, und das Lenkradschloss ist eingerastet, sodass das Lenkrad nur noch sehr wenig nach links und rechts gedreht werden kann.
TT: In certain cases of leaking air conditioning systems, the root cause of the leak is inadvertently overlooked, causing a repeat repair. To improve customer satisfaction and repair A/C system leaks in one dealer visit, Toyota has developed a set of guidelines for evaluating A/C system components.
TT: During previous air conditioning service, leakage prevention agent (A/C stop leak) may have been added to the A/C system. Adding stop leak products to the A/C system is not a recommended or approved Lexus repair process. During A/C service, moisture enters the A/C system, and can react with the previously added A/C stop leak, forming a gelatinous substance. The gel substance that forms can cause the A/C compressor to bind and or seize.
LSB: 2016 model year vehicles are equipped with driver's side floor mat retaining clips to secure the floor mat in the correct position. In addition, some models may utilize retaining clips for passenger side and rear seat floor mats as well. Follow the appropriate installation procedure to attach the driver's side, and if applicable, passenger's side and rear seat floor mats to the vehicle carpet using the floor mat retaining clips during Pre-Delivery Service (PDS).
LSB: 2016 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
LSB: Fahrzeuge des Modelljahrs 2016 sind mit Halteclips für die Fußmatte auf der Fahrerseite ausgestattet, die die Fußmatte in der korrekten Position sichern. Bei einigen Modellen können zusätzlich Halteclips für die Fußmatten auf der Beifahrerseite und im Fond verwendet werden. Befestigen Sie während des Pre-Delivery Service (PDS) die Fußmatte auf der Fahrerseite und, falls zutreffend, die Fußmatten auf der Beifahrerseite und im Fond mithilfe der Halteclips am Fahrzeugteppich, und zwar gemäß dem jeweils gültigen Einbauverfahren.
LSB: 2016 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
The vehicle will not start or ready-on and the steering wheel lock is engaged so that the steering wheel may only be turned very little from side-to-side.
Due to an assembly error, an incorrect fuel filter car was installed on the affected vehicles. This condition may cause an increase in evaporative emissions that exceed applicable standards.
Tech Tip: The vehicle will not start or ready-on and the steering wheel lock is engaged so that the steering wheel may only be turned very little side-to-side. HINT: The above listed vehicles are not equipped with an LED indicator on the "ENGINE START STOP" or "POWER" switch, and instead will display a message reading "Steering Lock Engaged" in the event that the steering lock actuator is unable to disengage from the steering column. If the operator attempts to ready-on or start the vehicle while there is tension on the steering lock actuator, it will not be able to fully disengage when the "ENGINE START STOP" or "POWER" switch is depressed. This condition will cause the vehicle message center to display the "Steering Lock Engaged" error message and the vehicle will fail to ready-on or start.
LSB: 2016 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
LSB: Fahrzeuge des Modelljahres 2016 sind mit Haltehaken für die Fußmatte auf der Fahrerseite ausgestattet, um die Fußmatte in der richtigen Position zu fixieren. Bei einigen Modellen können außerdem Haltehaken für die Fußmatten auf der Beifahrerseite und im Fond verwendet werden. Befestigen Sie während des Pre-Delivery Service (PDS) die Fußmatte auf der Fahrerseite und gegebenenfalls die Fußmatten auf der Beifahrerseite und im Fond mithilfe der Haltehaken am Fahrzeugteppich, und zwar gemäß dem jeweils zutreffenden Installationsverfahren.
The DCC fuses are removed at the assembly plant to reduce parasitic current draw from the battery during transport and storage. As a result of the removal of the DCC fuses, the Variable Gear Ratio Steering (VGRS) system will be inoperative and the steering wheel may be off-center. After the DCC fuses are reinstalled, the VGRS system will be operative, but the steering wheel may become off-center by 5 ? 10 degrees. This condition may also appear when the battery terminal has been disconnected.
The Advanced Parking Guidance System assists the driver during parking and parallel parking by displaying an image of the area behind the vehicle and controlling the steering wheel with the vehicle in reverse. When the DCC fuses are removed or battery terminal disconnected, the power source to the steering angle sensor is cut off. When the DCC fuses are reinstalled or the battery terminal is reconnected, the rear view monitor will operate, but the steering angle sensor center position must be set through system initialization before park assist will become operational.
Protective covers are installed on the front and rear wheel opening extension pads to prevent damage during transit. Use the following procedure to remove the protective covers during Pre-Delivery Service (PDS).
The front license plate mounting bracket and 2 self-tapping screws for the 2014 model year LS 460 and LS 600h are placed in the luggage compartment of the vehicle at the assembly plant. For states that require a front license plate, install the bracket during Pre-Delivery Service (PDS) according to the following procedures.
2014 model year LS 460 and LS 600h vehicles with a Navigation System are equipped with factory installed XM Satellite Radio and XM NavTraffic Services, including a 90-day free customer trial for each. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio and XM NavTraffic Services are activated and ready for use.
2015er Modelljahrgänge sind mit Haltclips für die Fußmatte auf der Fahrerseite ausgestattet, um die Fußmatte in der richtigen Position zu sichern. Bei manchen Modellen können zusätzlich Haltclips für die Fußmatten auf der Beifahrerseite und im Fond verwendet werden. Befolgen Sie bei der Auslieferungsinspektion (Pre-Delivery Service, PDS) das entsprechende Montageverfahren, um die Fußmatte auf der Fahrerseite sowie gegebenenfalls die Fußmatten auf der Beifahrerseite und im Fond mithilfe der Haltclips am Teppichboden des Fahrzeugs zu befestigen.
LSB: Protective covers are installed on the front and rear wheel opening extension pads to prevent damage during transit. Use the following procedure to remove the protective covers during Pre-Delivery Service (PDS).
LSB: As a result of the removal of the DCC fuses (No. 1 and No. 2), the driving position memory function of the driver and passenger seat will be inoperative due to loss of the seat position memory stored in the seat ECU. Initialize the front memory seat ECU after installing the DCC fuses during Pre-Delivery Service (PDS).
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).