Issue: On certain vehicles, the front passenger seat occupant classification system (OCS) may not work properly due to interference between seat components. As a result, the airbag system can turn off the passenger-front airbag even when a passenger is seated. Safety Risk: An airbag system that does not work properly could increase the risk of injury in a crash. Corrective Actions: To reduce the safety risk, Lexus recommends that you shouldn't transport a passenger in the front passenger seat until the recall repairs have been completed. Lexus will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the front passenger seat frame assembly.
Transport Canada24. März 20262026136Modelljahre 2022–2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Issue: On certain vehicles, a software problem could cause the transmission and/or transmission housing to become damaged. As a result, there could be a loss of power to the wheels and/or transmission fluid could leak. Safety Risk: A loss of power to the wheels could increase the risk of a crash. A transmission fluid leak could create the risk of a fire. Corrective Actions: Lexus will notify owners by mail and advise you to take your vehicle to a dealership to update the transmission electronic control unit software.
Transport Canada18. Feb. 20262026069Modelljahre 2025–2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2025-2026 Lexus LX600 vehicles. In the event of transmission solenoid failure, the communication may fail between the transmission electronic control unit (ECU) and the engine ECU, resulting in transmission damage.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Toyota Tundra, Lexus LX, and 2024 Lexus GX vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Lexus LX600 vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.
NHTSA · USA30. Mai 202424V381000Modelljahre 2022–2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Issue: On certain vehicles, the engine may not have been manufactured properly. As a result, metal debris could cause the crankshaft bearings to fail. If this happens, the engine may run rough or may not start. This could also cause the engine to stall while driving. Note: This recall only affects certain vehicles equipped with a 3.4L twin-turbo engine. This recall replaces Transport Canada recall No. 2025-614. Safety Risk: A sudden loss of power to the wheels could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and advise you to take your vehicle to a dealership to inspect the No. 1 main bearing for abnormal wear and, if necessary, replace the engine.
Transport Canada20. Mai 20262026241Modelljahre 2023–2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Lexus LX vehicles. The front passenger seat may have insufficient clearance between the seat frame and the stopper that can cause the Occupant Classification System (OCS) sensor to incorrectly detect the occupant. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
NHTSA · USA24. März 202626V180000Modelljahre 2022–2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
This recall was replaced by Transport Canada recall no. 2026-241. Issue: On certain vehicles, the engine may not have been manufactured properly. As a result, metal debris could cause the crankshaft bearings to fail. If this happens, the engine may run rough or may not start. This could also cause the engine to stall while driving. Note: This recall only affects certain vehicles equipped with a 3.4L twin-turbo engine. This recall is an expansion of Transport Canada Recall No. 2024-304. Safety Risk: A sudden loss of power to the wheels could increase the risk of a crash. Corrective Actions: The company will notify owners by mail. The corrective actions for this recall are under development.
Transport Canada6. Nov. 20252025614Modelljahre 2023–2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Problem: Unter bestimmten Bedingungen kann ein Softwareproblem dazu führen, dass das Rückfahrkamerabild einfriert oder nicht angezeigt wird. Wenn dies passiert, kann das Rücksichtsbild nicht angezeigt werden, wenn das Getriebe in den Rückwärtsgang geschaltet wird. Die kanadischen Vorschriften verlangen, dass das Rückfahrbild angezeigt wird, wenn das Fahrzeug rückwärts fährt. Hinweis: Dieser Rückruf betrifft nur bestimmte Fahrzeuge mit einem Panoramaüberwachungssystem. Sicherheitsrisiko: Ein Rückfahrkamerabild, das nicht korrekt angezeigt wird, kann die Fähigkeit des Fahrers, beim Rückwärtsfahren hinter das Fahrzeug zu sehen, verringern. Dies könnte das Unfallrisiko erhöhen. Korrekturmaßnahmen: Das Unternehmen wird die Eigentümer schriftlich informieren und Sie bitten, Ihr Fahrzeug zu einem Händler zu bringen, um die Parkassistenten-ECU-Software zu aktualisieren.
Toyota Motor Engineering & Manufacturing (Toyota) ruft bestimmte Fahrzeuge der Baujahre 2022 bis 2026 von Toyota, Lexus und Subaru Solterra zurück, die mit einem Panoramic View Monitor (PVM)-System ausgestattet sind. Eine vollständige Liste der Modelle finden Sie im Rückrufbericht. Ein Softwarefehler kann dazu führen, dass die Rückfahrkamera einfriert oder bei eingelegtem Rückwärtsgang einen leeren Bildschirm anzeigt. Dadurch erfüllen diese Fahrzeuge die Anforderungen der Federal Motor Vehicle Safety Standard (FMVSS) Nummer 111, "Rear Visibility", nicht.
Bei der Panoramaansicht bzw. dem Rückfahrkamera-Monitor kann es aufgrund unzureichender Verwaltung der Schweißanlagen vorkommen, dass die Wasserdichtigkeit der Verbindungsfläche des Kameragehäuses nicht gewährleistet ist und Regenwasser o. Ä. eindringen kann. Dadurch können die Schaltkreise korrodieren und es kann zu einer fehlerhaften Leitfähigkeit kommen, sodass das Kamerabild nicht angezeigt wird und die Umgebung des Fahrzeugs möglicherweise nicht überprüft werden kann.
The vehicles can contain crankshaft main bearings that have not been properly cleared of machining debris during manufacturing. This contamination can cause the bearings to fail. This can lead to engine knocking, rough running, inability to start, or stalling. If the engine stalls while driving, the sudden loss of power increases the risk of accidents and injuries.
Safety Gate · EU12. Juni 2024A12/01577/24Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Issue: On certain vehicles, the engine may not have been manufactured properly. As a result, metal debris could cause the crankshaft bearings to fail. If this happens, the engine may run rough or may not start. This could also cause the engine to stall while driving. Note: This recall only affects certain vehicles equipped with a 3.4L twin-turbo engine. Safety Risk: A sudden loss of power to the wheels could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and advise you to take your vehicle to a dealership to replace the engine.
Transport Canada30. Mai 20242024304Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Issue: On certain vehicles, a problem with the transmission could cause the vehicle to move forward when the driver shifts to the ''N''(Neutral) position and the brakes or parking brake aren't applied. Note: For the Tundra model, this recall affects both Tundra and Tundra Hybrid models. For the Sequoia model, only the Sequoia Hybrid model is affected by this recall. Safety Risk: A vehicle that moves suddenly could create the risk of an injury or a crash. Corrective Actions: The company will notify owners by mail and advise you to take your vehicle to a dealership to update the transmission control unit software.
Transport Canada21. Feb. 20242024109Modelljahre 2022–2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Tundra, Tundra Hybrid, Lexus LX600, and 2023-2024 Sequoia Hybrid vehicles. Unexpected vehicle movement may occur when the vehicle is in neutral and the brakes are not applied.
Issue: Under certain conditions, the vehicle stability control (VSC) system may not switch on when the ignition is restarted. This can happen if the driver manually turns off the VSC, depresses the brake pedal, and then turns off and restarts the vehicle while continuously depressing the brake pedal. Canadian regulations require the stability control system to be active each time that you start the vehicle. Safety Risk: A stability control system that is switched off could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to update the skid control ECU software.
Transport Canada13. Apr. 20222022179Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Toyota Engineering & Manufacturing (Toyota) is recalling certain 2022 Lexus LX 600, Lexus NX 350h, Lexus NX 450h+, Toytoa RAV4 Hybrid, 2021-2022 Lexus LS 500h, Toyota Mirai, RAV4 PRIME, Sienna, Venza, and 2020-2022 Toyota Highlander Hybrid vehicles. The Skid Control ECU software may not turn on the Vehicle Stability Control (VSC) system when the vehicle is restarted after the driver has disabled the VSC system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."
Beim Panoramic View Monitor kann es aufgrund unzureichend geprüfter Steuerungsprogramme vorkommen, dass bei Betätigungen wie dem Rückwärtsfahren unmittelbar nach dem Start das Bild der Fahrzeugumgebung verrutscht oder vorübergehend stehen bleibt bzw. nicht angezeigt wird. Dadurch besteht die Möglichkeit, dass das Fahrzeug nicht den gesetzlichen Sicherheitsanforderungen (Hinweis: Betriebserlaubnis-/Sicherheitsvorschriften) entspricht.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).