Problem: Dieser Rückruf betrifft bestimmte Blockheizsätze, die bei bestimmten Fahrzeugen installiert oder als Zubehör bei Toyota- oder Lexus-Händlern verkauft werden. Bei bestimmten Fahrzeugen hat das Motorblockheizkabel möglicherweise nicht ausreichend Hitzeschutz und kann durch hohe Temperaturen beschädigt werden. Wenn dies passiert, könnte das Kabel während des Einsteckens kurzschließen und dazu führen, dass die Kabel überhitzt oder schmelzen. Hinweis: Dieser Rückruf betrifft nur die folgenden Teilenummern des Blockheizer/-kabels: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Sicherheitsrisiko: Überhitzung oder Schmelzen der Motorblockheizungsleitungen können ein Brandrisiko darstellen. Korrekturmaßnahmen: Toyota empfiehlt, die Motorblockheizung sofort nicht mehr zu verwenden. Toyota wird die Besitzer per Post benachrichtigen und Sie anweisen, Ihr Fahrzeug zu einem Händler zu bringen, um den Motorblockheizer zu deaktivieren. Für einige Fahrzeuge sind die Korrekturmaßnahmen für diesen Rückruf noch in Entwicklung. Bei anderen kann kein neuer Motorblockheizer installiert werden, und der Besitzer erhält eine Rückerstattung des Kaufpreises für den Motorblockheizer.
It is possible that due to variations in the build specification of the Intelligent Power Module (IPM) which includes the Insluted-Gate Bipolar Transistors (IGBT's) the lead-based solder could be affected by abnormally higher operating temperatures. This could result in a degrading of the solder and eventually heat damage to the IGBT's. If this occurs then warning lights on the instrument panel will illuminate. However if the driver fails to heed these warnings or the main power supply fuse blows then the vehicle could stop without warning.
null In limited instances, the fuse of the power supply circuit for the Intelligent Power Module (IPM) could blow, causing the hybrid system to shut down and resulting in the vehicle stopping while being driven, increasing the risk of a crash.
The Intelligent Power Module within the inverter system may fail. This will result in various warning lamps being illuminated. In most cases this will result in the vehicle entering the fail-safe mode resulting in limited power. In limited instances the fuse on the power supply circuit could blow resulting in the hybrid system stopping.
DVSA · Vereinigtes Königreich5. Aug. 2011R/2011/076Modelljahre 2004–2006Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On certain vehicles, a control board for the Intelligent Power Module (IPM), part of the hybrid system inverter assembly, could fail while the vehicle is underway. This could cause various warning lamps, including the malfunction indicator lamp, slip indicator lamp, brake system warning lamp, and master warning lamp, to illuminate on the instrument panel. If this occurred, in most cases, the vehicle would enter fail-safe driving mode, resulting in reduced motive power in which the vehicle could still be driven for short distances. In some instances, the fuse of the power supply circuit could blow, causing the hybrid system to stop functioning. The resultant loss of vehicle propulsion, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the Intelligent Power Module.
Transport Canada29. Juni 20112011243Modelljahre 2006–2007Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
In the stop lamp switch of subject vehicles equipped with LED stop lamps there is the possibility that silicone oxide may be generated the surface of the contact point and in consequence the resistance of the contact could increase. In this circumstance current may not flow causing the stop lamp to become inoperative.
On certain vehicles equipped with a light emitting diode (LED) stop lamp, there is a possibility that silicon oxide may be generated on the surface of the contact point inside the stop lamp switch. Consequently, current may not flow at the contact, causing the stop lamp to become inoperative. The loss of stop lamps would result in failure to warn following drivers that the vehicle is braking and/or is stopped, which could lead to a vehicle crash. Correction: Dealers will replace the stop lamp switch.
Transport Canada23. Nov. 20042004409Modelljahre 2004Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).